• Ecology and Resilient Infrastructure
• /
• v.6 no.2
• /
• pp.109-119
• /
• 2019

Eutrophication has occurred due to the inflow of various water pollutants in many Korean reservoirs with low depth, and algal blooms of surface layer and low oxygenation of deep layer have repeated every year. There are several existing technologies to alleviate the stratification of reservoirs, but it is difficult to apply them in field sites due to the necessity of electric power and low economic efficiency. In this study, a non-powered water circulation system using natural energy of wind and water flow has been developed, and two test-beds constructed in the reservoirs with different conditions and examined its field applicability. Through computational fluid dynamics (CFD) simulation, it has been shown that the water circulation system could induce the downward flow to mitigate the stratification between surface and deep layers, and its influence radius could reach about 30 m. As a result of long-term monitoring of the test-beds, various water quality improvement effects have been observed such as moderation of DO fluctuation by water circulation, reduction of DO supersaturation and prevention of excessive pH rising. In order to improve the applicability of the water circulation system, it is considered necessary to review countermeasures against flood and depth conditions of each reservoir.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1B
• /
• pp.95-109
• /
• 2008

We numerically analyzed the nonlinear shoaling, a plunging breaker and its accompanying energetic suspension of sediment at a bed, and a redistribution of suspended sediments by a down rush of preceding waves and the following plunger using SPH with a Gaussian kernel function, Lagrangian Dynamic Smagorinsky model (LDS), Van Rijn's pick up function. In that process, we came to the conclusion that the conventional model for the tractive force at a bottom like a quadratic law can not accurately describe the rapidly accelerating flow over a swash zone, and propose new methodology to accurately estimate the bottom tractive force. Using newly proposed wave model in this study, we can successfully duplicate severely deformed water surface profile, free falling water particles, a queuing splash after the landing of water particles on the free surface and a wave finger due to the structured vortex on a rear side of wave crest (Narayanaswamy and Dalrymple, 2002), a circulation of suspended sediments over a swash zone, net transfer of sediments clouds suspended over a swash zone toward the offshore, which so far have been regarded very difficult features to mimic in the computational fluid mechanics.

• Tuberculosis and Respiratory Diseases
• /
• v.65 no.4
• /
• pp.301-307
• /
• 2008

Background: The triggering receptor expressed on myeloid cells-1 (TREM-1) is an activating receptor that is expressed on the surface of neutrophils and mature monocytes when stimulated with several microbial components, which can amplify the inflammatory response. This study analyzed the prognostic value of the sTREM-1 levels in patients with acute respiratory distress syndrome (ARDS). Methods: The bronchoalveolar lavage (BAL) fluid and blood was collected prospectively from 32 patients with ARDS, 15 survivors and 17 nonsurvivors. An enzyme-linked immunosorbent assay was performed to measure the sTREM-1. The following data was obtained: APACHE II score, Clinical Pulmonary Infection Score (CPIS), BAL fluid analysis, C-reative protein. Mortality in the ICU was defined as the end point. Results: The serum sTREM-1 level was significantly higher in the nonsurvivors than survivors ($54.3{\pm}10.3pg/ml$ vs. $22.7{\pm}2.3pg/ml$, p<0.05). The sTREM-1 level in the serum, but not in the BAL fluid, was an independent predictor of the ICU mortality (OR: 22.051, 95% CI: 1.780~273.148, p<0.016), and a cut-off value of ${\geq}33pg/ml$ yielded a diagnostic sensitivity of 71% and specificity of 93%. Conclusion: The serum sTREM-1 level may be a useful predictor of the outcome of ARDS patients.

• Korean Journal of Dental Materials
• /
• v.44 no.3
• /
• pp.263-272
• /
• 2017

In this study, antibacterial chlorhexidine (CHX)-containing hydroxyapatite (HAp) was coated on titanium and investigated its characteristics. Ti-mSBF-CHX group was prepared by soaking titanium disks in the modified simulated body fluid (mSBF) mixed with CHX. Ti-mSBF group was coated using mSBF without CHX. Ti-mSBF-adCHX group was prepared by soaking Ti-mSBF specimen in CHX-containing solution. The crystallines clusters composed with nano-shaped crystallites were coated on the surface of the Ti-mSBF specimen. The ribbon-shaped crystallites were observed with the crystalline clusters on the Ti-mSBF-CHX specimen. The content of CHX chemical compositions was high in ribbon-shaped crystallites. HAp crystalline structure was dominant for all prepared specimens, and ${\beta}-TCP$ (tricalcium phosphate) and OCP (octacalcium phosphate) crystalline structures were observed in the Ti-mSBF-CHX specimen. FT-IR spectra showed the strong peaks of CHX in Ti-mSBF-adCHX and Ti-mSBF-CHX groups. However, after immersing in a phosphate buffered saline (PBS), CHX was rapidly released in Ti-mSBF-adCHX group, while it was slowly released in Ti-mSBF-CHX. We expect that the coating method of Ti-mSBF-CHX group could be used for protecting inflammation of titanium implant by incorporating antibacterial agent CHX into HAp layer.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.313-331
• /
• 2022

Natural or native abiotic molecular hydrogen (H₂) is a major component in natural gas, however yet its importance in the global energy sector's usage as clean and renewable energy is underestimated. Here we review the occurrence and geological settings of native hydrogen to demonstrate the much widesprease H₂ occurrence in nature by comparison with previous estimations. Three main types of source rocks have been identified: (1) ultramafic rocks; (2) cratons comprising iron (Fe²⁺)-rich rocks; and (3) uranium-rich rocks. The rocks are closely associated with Precambrian crystalline basement and serpentinized ultramafic rocks from ophiolite and peridotite either at mid-ocean ridges or within continental margin(Zgonnik, 2020). Inorganic geological processes producing H₂ in the source rocks include (a) the reduction of water during the oxidation of Fe²⁺ in minerals (e.g., olivine), (b) water splitting due to radioactive decay, (c) degassing of magma at low pressure, and (d) the reaction of water with surface radicals during mechanical breaking (e.g., fault) of silicate rocks. Native hydrogen are found as a free gas (51%), fluid inclusions in various rock types (29%), and dissolved gas in underground water (20%) (Zgonnik, 2020). Although research on H₂ has not yet been carried out in Korea, the potential H₂ reservoirs in the Gyeongsang Basin are highly probable based on geological and geochemical characteristics including occurrence of ultramafic rocks, inter-bedded basaltic layers and iron-copper deposits within thick sedimentary basin and igneous activities at an active continental margin during the Permian-Paleogene. The native hydrogen is expected to be clean and renewable energy source in the near future. Therefore it is clear that the origin and exploration of the native hydrogen, not yet been revealed by an integrated studies of rock-fluid interaction studies, are a field of special interest, regardless of the presence of economic native hydrogen reservoirs in Korea.

• Korean Journal of Food Science and Technology
• /
• v.32 no.4
• /
• pp.843-850
• /
• 2000

We have produced the microcapsule composed of ${\alpha}-tocopherol$ as a core material (Cm) and the gelatinized polysaccharide as a wall material (Wm). Firstly, we have developed a simple, sensitive, and quantitative analysis method of the microencapsulation product using 5% cupric acetate pyridine solution. We could then optimize all the conditions for the microencapsulation process such as the ratio of [Cm] to [Wm], the temperature of dispersion fluid, and the emulsifier concentration using response surface methodology (RSM). As for the microencapsulation of ${\alpha}-tocopherol$, the regression model equation for the yield of microencapsulation (YM, %) to the change of an independent variable could be predicted as follows : YM=99.77-1.76([Cm]:[Wm])-1.72$([Cm]\;:\;[Wm])^2$. From the ridge of maximum response, the optimum conditions for the microencapsulation of ${\alpha}-tocopherol$ were able to be determined as the ratio of [Cm] to [Wm] of 4.6:5.4(w/w), the emulsifier concentration of 0.49%, and dispersion fluid temperature of $25.5^{\circ}C$, respectively. Finally, the microcapsules produced under the optimal conditions were applied for the analysis of storage stability. The optimal conditions for the storage were found to be the values of pH 9.0 and $25{\sim}35^{\circ}C$. And the storage stability of the microcapsules containing ${\alpha}-tocopherol$ were higher than 99% for a week at pH 9.0 and $25^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.411-416
• /
• 1996

Supercritical fluid extraction of ${\beta}$-carotene from carrot was optimized to maximize ${\beta}$-carotene (Y) extraction yield. A central composite design involving extraction pressure ($X_1$ 200-,100 bar), temperature ($X_2,\;35-51^{\circ}C$) and time ($X_1$$ 60-200min) was used. Three independent factors ($X_1,\;X_2,\;X_3$) were chosen to determine their effects on the various responses and the function was expressed in terms of a quadratic polynomial equation,$Y={\beta}_0+{\beta}_1X_1+{\beta}_2X_2+{\beta}_3X_3+{\beta}_11X_12+{\beta}_22X_3^2+{\beta}_-12X_1X_2+{\beta}_12X_1X_2+{\beta}_13X_1X_3+{\beta}_23X_2X_3,$ which measures the linear, quadratic and interaction effects. Extraction yields of ${\beta}$-carotene were affected by pressure, time and temperature in the decreasing order, and linear effect of tenter point (${\beta}_11$) and pressure (${\beta}_1$) were significant at a level of 0.001(${\alpha}$). Based on the analysis of variance, the model fitted for ${\beta}_11$-carotene (Y) was significant at 5% confidence level and the coefficient of determination was 0.938. According to the response surface of ${\beta}$-carotene by cannoical analysis, the stationary point for quantitatively dependent variable (Y) was found to be the maximum point for extraction yield. Response area for ${\beta}$-carotene (Y) in terms of interesting region was estimated over $10,611{\mu}g$ Per 100 g raw carrot under extraction.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.21 no.2
• /
• pp.131-136
• /
• 1985

The calculation of the resulting fluid motion is an important problem of ship hydrodynamics. For a partially immersed body the condition of constant pressure at the free surface can be linearized. The resulting linear boundary-value problem for the velocity potential is the Neumann-Kelvin problem. The two-dimensional Neumann-Kelvin problem is studied for the half-immersed circular cylinder by Ursell. Maruo introduced a slender body approach to simplify the Neumann-Kelvin problem in such a way that the integral equation which determines the singularity distribution over the hull surface can be solved by a marching procedure of step by step integration starting at bow. In the present pater for the two-dimensional Neumann-Kelvin problem, it has been suggested that any solution of the problem must have singularities in the corners between the body surface and free surface. There can be infinitely many solutions depending on the singularities in the coroners.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.3
• /
• pp.254-259
• /
• 2014

A pressurized heavy water reactor (PHWR) core has 380 fuel channels contained and supported by a horizontal cylindrical vessel known as the calandria, whereas a pressurized water reactor (PWR) has only a single reactor vessel. The pressure tube, which is a pressure-retaining component, has a 103.4 mm inside diameter ${\times}$ 4.19 mm wall thickness, and is 6.36 m long, made of a zirconium alloy (Zr-2.5 wt% Nb). This provides support for the fuel while transporting the $D_2O$ heat-transfer fluid. The simple tubular geometry invites highly automated inspection, and good approach for all inspection. Similar to all nuclear heat-transfer pressure boundaries, the PHWR pressure tube requires a rigorous, periodic inspection to assess the reactor integrity in accordance with the Korea Nuclear Safety Committee law. Volumetric-based nondestructive evaluation (NDE) techniques utilizing ultrasonic and eddy current testing have been adopted for use in the periodic inspection of the fuel channel. The eddy current testing, as a supplemental NDE method to ultrasonic testing, is used to confirm the flaws primarily detected through ultrasonic testing, however, eddy current testing offers a significant advantage in that its ability to detect surface flaws is superior to that of ultrasonic testing. In this paper, effectiveness of flaw detection and the depth sizing capability by eddy current testing for the inside surface of a pressure tube, will be introduced. As a result of this examination, the ET technique is found to be useful only as a detection technique for defects because it can detect fine defects on the surface with high resolution. However, the ET technique is not recommended for use as a depth sizing method because it has a large degree of error for depth sizing.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.1
• /
• pp.46-53
• /
• 1996

Background: Endotoxin or lipopolysaccharide(LPS) can prime phagocytic cells such as polymorphonuclear leukocytes, monocytes or animal peritoneal macrophages to generate increased amounts of secretory products such as oxygen free radicals and tumor necrosis factor, which play an important role in developing adult respiratory distress syndrome in gram negative sepsis. Human alveolar macrophages(HAM) are continuously exposed to various stimuli inhaled into the alveoli, and the response to LPS might be different in HAM. Therefore, we investigated the effect of LPS pre-exposure on HAM adhered to plastic surface and A549 cell(type II human alveolar epithelial cell line) monolayer. Methods: HAM were isolated from bronchoalveolar lavage fluid from normal lung of the patients with localized lung cancer and esophageal cancer. LPS was exposed to HAM for 2hrs before or after adherence to plastic surface of 24-well Linbro plate and A549 cell monolayer. And then HAM was stimulated with PMA(phorbol myristate acetate) or fMLP(N-formyl-methionylleucyl-phenylalanine). The amount of hydrogen peroxide($H_2O_2$) production in the supernatant was measured on the principle of peroxidase-dependent oxidation of phenol red by hydrogen peroxide. Results: LPS pre-exposure could not enhance $H_2O_2$ production in neither HAM adhered to plastic surface nor one to A549 cell monolayer. But LPS even in the absence of PMA or fMLP stimulation directly increased $H_2O_2$ release in HAM if added after the adherence to A549 cell monolayer. Conclusion: Endotoxin does not prime HAM, but may directly activate HAM adhered to alveolar epithelial cells. Further investagation will be necessary.