• Journal of Advanced Marine Engineering and Technology
• /
• 제25권6호
• /
• pp.1220-1227
• /
• 2001

The condensation pressure drop fur refrigerant R-22 flowing in the plate and shell heat exchanger were investigated experimentally in this study. Two vertical counterflow channels were formed in the exchanger by three plates of commercial geometry with a corrugated trapezoid shape of a chevron angel of $45^{\circ}$. The condensing R-22 flowing down in one channel exchanges heat with the cold water flowing up in the other channel. The effects of the mean vapor quality, mass flux, average imposed heat flux and system pressure of R-22 on the pressure drop were explored in detail. The quality change of R-22 between the inlet and outlet of the refrigerant channel ranges from 0.03 to 0.05. The present data showed that pressure drop increases with the vapor quality. At a higher mass flux, pressure drop is higher for the entire range of the vapor quality. Also, a rise in the average imposed heat flux causes an slight increase in the Pressure drop. Finally, at a higher system pressure the pressure drop is found to be slightly lower. Correlation is also provided for the measured pressure drops in terms of the friction factor.

• 한국컴퓨터정보학회논문지
• /
• 제7권4호
• /
• pp.66-74
• /
• 2002

웹 기반 하에서의 문서유통의 경우 문제가 되는 것은 작성된 문서가 표준화되어 있지 못하다는 것이고, 또 다른 한가지는 기밀 자료의 유출이며 의도적이고 악의적으로 유통되는 문서를 변조하려는 공격에 대한 대처가 미흡하다는 것이다. 최근에는 마그업 언어인 SGML로부터 HTML을 만들어내고 이를 웹개발에 이용하였으나 많은 사용자들이 웹에서 사용하는 문서나 메시지나 데이터의 정의를 위한 방법들을 표준하기 미흡하였다. 그러나 XML이 등장하면서 이러한 문제를 해결하고 있으나 문서 유통의 안전을 보장하기 어려웠다. 본 연구는 웹환경 하에서 업무처리에 필수적인 문서유통에서 전자서명을 이용한 정보보호를 위하여 XML을 기반으로 하여 전자서명의 절차를 규정하고 컴포넌트들을 설계하려 한다.

• 대한기계학회논문집B
• /
• 제31권6호
• /
• pp.499-506
• /
• 2007

This study aims to propose evaluation methods of chemical washing performance and estimate the washing capability by flowing detergent/water solution for application to home appliances such as dishwashers. Standard pollutant is stearic acid. A numerical study is also tried using a SIMPLER code. Preliminary experiments are performed by varying the concentration and temperature of the solution. From the pre-experiments, 10 minute pre-curing time is found to be necessary to remove the stearic acid. Stoichiometric ratio and detergent consumption coefficient of reaction between the detergent and stearic are estimated following a proposed method. Washing experiments of pollutant to compare with the numerical results are performed. The relative errors between the experimental and the numerical results with pre-curing time included are less than 7%. In conclusion, important mechanisms of chemical washing are revealed and methods of predicting washing performance are well established.

• 대한기계학회논문집B
• /
• 제33권7호
• /
• pp.527-534
• /
• 2009

Flame stabilization characteristics were experimentally investigated in a fuel-air cross flowing mixing layer. A combustor consists of a narrow channel of air steam and a cross flowing fuel. Depending on the flow rates of methane and air, flame can be stabilized in two modes. First is an attached flame which is formulated at the backward step where the methane and air streams meet. Second is a lifted-flame which is formulated within the mixing layer far down steam from backward step. The heights and flame widths of the lifted flames were measured. Flame shapes of the lifted flames were similar to an ordinary edge flame or a tribrachial flame, and their behavior could be explained with the theories of an edge flame. With the increase of the mixing time between fuel and air, the fuel concentration gradient decreases and the flame propagation velocity increases. Thus the flame is stabilized where the flow velocity is matched to the flame propagation velocity in spite of a significant disturbance in the fuel mixing and heat loss within the channel. This study provides many experimental results for a higher fuel concentration gradient, and it can also be helpful for the development and application of a smaller combustor.

• 생태와환경
• /
• 제53권2호
• /
• pp.138-147
• /
• 2020

The Singil Stream, flowing into an artificial lake, Lake Shihwa (South Korea), experiences a strong anthropogenic pressure with continuous organic matter (OM) inputs from rural, urban, and industrial areas. In this study, we investigated suspended particulate matter (SPM) and streambed sediments collected along the Singil Stream in 2014 and 2016, by applying a dual element approach (δ¹³C and δ¹⁵N) to identify OM sources. The SPM and streambed sediment samples from the indusrial area showed higher organic carbon and nitrogen concentrations (or contents) than those from the other areas, with distinctively lower δ¹⁵N values. Accordingly, our dual element approach indicates that the industrial area was the predominant OM source influencing OM quality and thus water quality of the Singil Stream flowing into Lake Shihwa during the study periods. However, further studies are necessary to better constrain OM sources in the Singil Stream since OM sources from the industrial area appear to be complex.

• 한국물환경학회지
• /
• 제21권1호
• /
• pp.79-83
• /
• 2005

Foraging behaviour of false dace, Pseudorasbora parva, was investigated in water flowing at various velocities with the existence of a cavity for rest. The pursuit comprised three succeeding processes such as, approaching, chasing and attacking. Angles between the fish body and the water flow direction and swimming speeds increased in the latter stages of approaching, chasing and attacking. All pursuit angles, swimming speeds and distances increased with flow velocity and peaked at the flow velocity of 7 cm/sec. At higher velocities, however, the fish avoided the use of much energy against the large drag force. The probability of capture and the feeding rate steadily decreased with increasing flow velocity. Under the fast flow, the fish adjusted their swimming speed to get the optimum velocity relative to the flowing water for the energetic budget. Fish spent more time in the cavity as flow velocity increased to avoid the energy expenditure necessitated by the high velocity.

• 한국기계가공학회지
• /
• 제16권1호
• /
• pp.42-50
• /
• 2017

A cerebral aneurysm is a ballooning arising from a weakened area in the wall of a blood vessel in the brain. In this study, the flow analysis of the blood vessel, including the cerebral aneurysm and the stent, was conducted to investigate the effect of the stent shape on reduction of blood flowing into the cerebral aneurysm. We used the Carreau model to describe Non-Newtonian behaviors of blood flow. Two kinds of stents, which had different cross angles were modelled by the commercial CAD program and the geometries of those stents were reflected in the analysis domain of the blood vessel. From the results of the flow analysis, we found that the blood flowing into the cerebral aneurysm was decreased as the cross angle of the stent was decreased.

• Ocean and Polar Research
• /
• 제25권3호
• /
• pp.287-302
• /
• 2003

The seasonal variations in the circulation of the water mass in the East Sea/Japan Sea have been simulated using a free surface primitive ocean model, RIAMOM (RIAM Ocean Model), comparing the results from GFDL-MOM1 (Geophysical Fluid Dynamics Laboratory Modular Ocean Model, version 1.1, hereafter MOM) with the GDEM (Generalized Digital Environmental Model) data. Both models appear to successfully reproduce the distinct features of circulation in the East Sea/Japan Sea, such as the NB (Nearshore Branch) flowing along the Japanese coast, the EKWC (East Korean Warm Current) flowing northward along the Korean coast, and the NKCC/LCC (North Korean Cold Current/Liman Cold Current) flowing southwestward along Korean/Russian coast. RIAMOM has shown better performance, compared to MOM, in terms of the realistic simulation of the flow field in the East Sea/Japan Sea; RIAMOM has produced more rectified flows on the coastal region, for example, the narrower and stronger NKCC/LCC than MOM has. There is however obvious differences between the model results and the GDEM data in terms of the calculation of the water mass; both models have shown a tendency to overpredict temperature and underpredict salinity below 50m; more diffusive forms of thermocline and halocline have been simulated than noted in GDEM data.

• 대한기계학회논문집A
• /
• 제27권4호
• /
• pp.567-576
• /
• 2003

In this study, a robust controller to control pressure in a pneumatic pressure vessel with a long transmission line is proposed. Frequency response of transmission line using compressible fluid is changed by the flowing state of the fluid. So, it a fixed gain controller designed based on a model supposed the flowing state to a specific state, the performance of the control system could be degraded because of the modelling error. The controller designed in this study is composed of two parts. One is a feedback controller to improve a feedback characteristics and to compensate the influence of the variation of transfer characteristics of a transmission line owing to the change of flowing state and the other is a feedforward controller to regulate command fallowing performance. The experimental results with the designed controller show that the robustness of the control system is achieved regardless of the change of the model or the transmission line. Therefore, the designed controller can be utilized for the Performance improvement of a Pressure control system with a long transmission line using compressible fluid.

• Bulletin of the Korean Chemical Society
• /
• 제25권1호
• /
• pp.51-54
• /
• 2004

Gallium nitride (GaN) powders were prepared by calcining a gallium(III) nitrate salt in flowing ammonia in the temperature ranging from 500 to 1050 $^{\circ}C$. The process of conversion of the salt to GaN was monitored by X-ray diffraction and $^{71}Ga$ MAS (magic-angle spinning) NMR spectroscopy. The salt decomposed to ${\gamma}-Ga_2O_3$ and then converted to GaN without ${\gamma}-{\beta}Ga_2O_3$ phase transition. It is most likely that the conversion of ${\gamma}-Ga_2O_3$ to GaN does not proceed through $Ga_2O$ but stepwise via amorphous gallium oxynitride ($GaO_xN_y$) as intermediates. The GaN nanowires and microcrystals were obtained by calcining the pellet containing a mixture of ${\gamma}-Ga_2O_3$ and carbon in flowing ammonia at 900 $^{\circ}C$ for 15 h. The growth of the nanowire might be explained by the vapor-solid (VS) mechanism in a confined reactor. Room-temperature photoluminescence spectra of as-synthesized GaN powders obtained showed the emission peak at 363 nm.