• 한국전산유체공학회지
• /
• 제12권4호
• /
• pp.74-84
• /
• 2007

The flowfield characteristics in a straight rectangular channel have been investigated through a numerical model to analyze the regenerative cooling system that is used in rocket engine cooling. The supercritical hydrogen coolant introduces strong property variations that have a major influence on the developing flow and heat transfer characteristics. Of particular interest is the improved understanding of the physical characteristics of such flows through parametric studies. The approach used is a numerical solution of the full Navier-Stokes equations in the three dimensional form including the arbitrary equation of state and property variations. The present study compares constant and variable property solutions for both laminar and turbulent flow. For laminar flow, the variation of aspect ratio is examined, while for turbulent flow, the effects of variation of channel length and Reynolds number are discussed.

• 대한조선학회논문집
• /
• 제37권1호
• /
• pp.60-66
• /
• 2000

고속 프로펠러를 대상으로 캐비테이션 발생 특성에 가장 큰 영향을 미치는 2차원 날개단면의 앞날 형상에 관한 연구를 수행하였다. 앞날 주위의 유동장을 해석하기 위하여 비압축성 RANS(Reynolds Averaged Navier-Stokes)방정식을 유한체적법(FVM)으로 차분하는 수치해석기법을 사용하였다. 또한 패널법을 이용하여 캐비테이션 발생두께를 예측하였다. 예측된 결과들은 실험결과와 비교해서 타당함을 알 수 있었으며, 이 결과를 이용하여 새로운 단면을 설계하였다.

• 대한기계학회논문집B
• /
• 제28권4호
• /
• pp.486-492
• /
• 2004

Flow patterns around a rotating circular cylinder having square dimpled surface were visualized by the hydrogen bubble technique at velocity ratios from a=0 to 4.8 and Reynolds number of Re=1.0${\times}$10$^4$. The wake region of the cylinder was reduced as the velocity ratios increase and was smaller than that of the smooth cylinder without dimples at the same velocity ratio. The hydrodynamic characteristics on the cylinder was investigated by measuring of lift and drag at velocity ratios from a=0 to 4.1 and Reynolds number from Re=1.2${\times}$10$^4$ to Re=2.0${\times}$10$^4$. As the velocity ratios increase, the average lift and drag coefficients were increased and at the same velocity ratio, the average lift was larger but the average drag was smaller than that of the smooth cylinder.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 추계 학술대회논문집
• /
• pp.76-83
• /
• 2001

The incompressible Reynolds-averaged Navier-Stokes equations are solved to predict the aerodynamic characteristics of an airship hull. The concept of pseudo-compressibility is employed to couple the pressure field with the velocity field. The upwind differencing method for spatial discretization and a line relaxation scheme for time integration are used. The flowfield around the low drag airship hull of fineness ratio 4 is solved for two Reynolds numbers with a wide range of angle of attack. The effect of Reynolds number and transition position is briefly examined together with the change in aerodynamic coefficients due to a gondola attached to the hull, and the results will be used as basic data for the design of a low drag airship hull.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 춘계 학술대회논문집
• /
• pp.213-218
• /
• 2005

The purpose of this study is the characteristics of an innovative inlet system with shock/boundary layer interactions by using various types of bumps which are substituted for the conventional bleeding system in supersonic inlet. This study performs a comprehensive numerical effort that be directed at better understanding the three-dimensional flowfield includes shock/boundary layer interaction and growth of turbulent boundary layer that occur around a three-dimensional bump in a supersonic inlet. The characteristics of boundary layer seen in the current numerical simulations indicates the potential capability of the three-dimensional bump to control shock/boundary layer interaction in supersonic inlets.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.434-440
• /
• 2000

The atomization characteristics of air-assist atomizer which is surrounded by a coflowing airstream is investigated. The air-assist, coflow air stream had swirl imparted to them in the same direction with 45 degree's angle swillers. The fuel and air entered the combustor at ambient temperature and the combustor was operated in an unconfined environment. Diesel fuel was used for all the experiments. Drop size and mean velocity are reported for certain distances downstream from the nozzle. The droplet size and velocity measurements were performed using a two-component phase/Doppler particle analyzer and velocity profiles across the entire flowfield are presented.

• 한국가시화정보학회지
• /
• 제9권3호
• /
• pp.30-37
• /
• 2011

The thrust vectoring concept has been used for use in new advanced supersonic aircraft. This study presents the performance characteristics of the thrust vectoring nozzle by visualizing the shock behaviors with Schlieren method. The scaled models were designed and manufactured to see the shock behaviors of the various airflow condition. Also we executed experimental tests to see the geometrical effects of the thrust vector nozzle by changing pitch angle and length of pitch flaps. From this study we could understand the supersonic flow characteristics of the thrust vector nozzle. The total thrust of thrust vector nozzle is diminished by increasing the flap angle. But there is an optimum flap length ratio for attaining the highest thrust level and proper pitch effect.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.331-334
• /
• 2010

The supersonic speeds slowing down by shock waves is a common problem during the transonic region. So how to study the status of shock on the surface of airplane and wings is crucial adjective during transonic region. However, the theoretical and computational transonic flow problems were very hard. This paper introduced using Navier-Stokes Schemes to study characteristics of AGARD Wing 445.6 by ANSYS CFX in transonic region. From simulations results, as the Mach number increases, shock waves appear in the flowfield, getting stronger as the speed increases, these shock waves will lead to a rapid increase in drag.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권4호
• /
• pp.338-343
• /
• 2013

본 연구는 후류측에 분리된 분할판(Detached splitter plate)을 설치한 경우 정방형주의 주위의 유동장 특성을 분할판의 폭과 정방형주 후면에서부터 분할판까지의 간격을 변수로 하여 PIV를 이용한 가시화실험으로 파악한 것이다. 그 결과를 요약하면 다음과 같다. 분할판 후류측에서 측정한 Strouhal 수는 분할판의 폭비 및 간격비가 증가할수록 감소했다. 분할판의 상부에는 시계방향의, 하부에는 반시계방향의 볼테스가 존재하였고, 이 볼텍스 영역의 크기는 분할판 폭비가 클수록 크게 나타났다. 분할판을 가진 정방형주 후류측에는 역류가 존재하였고, 이 역류의 크기는 분할판 폭비가 클수록 증가했다.

• 한국철도학회논문집
• /
• 제13권1호
• /
• pp.44-50
• /
• 2010

본 연구에서는 튜브-열차 시스템의 기본적인 유동장의 특성을 파악하고, 튜브열차의 공기저항을 계산할 수 있는 보다 효율적인 수치 해법을 제시하고 계산 결과에 대한 타당성을 논하였다. 최소한의 계산 영역 내에선 정상상태의 해를 찾기 위하여 비정상 해석의 결과를 기준으로 하여 경계조건의 부여 방법을 변화시킨 정상 해석의 결과를 비교한 결과, 열차속도가 300 km/h일 경우에는 공기저항의 값이 정상해석 결과와 비정상해석 결과가 잘 일치하였으며, 동일 속도 대역에서의 고속열차 현장시험 결과와 비교한 결과 열차/터널 단면적비에 따라 공기저항의 비가 동일한 추세를 나타나는 것으로 나타났다.