• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.292-292
• /
• 2016

논의 배수특성 분석은 물꼬 크기 및 개소수, 배수로 구성, 규모, 경사, 재질 등과 같은 물리적 특성 인자들의 영향으로 인해 일반적인 유역의 홍수량 산정을 위해 사용되는 수문학적 홍수추적 방법의 적용이 어렵다. 따라서 논에서의 유출을 모의하기 위해서는 수리학적 홍수추적 방법의 적용이 필요하며, 기존의 연구들은 대부분 1차원과 2차원의 수치 해석 기법으로 논의 유출 특성을 분석해왔다. 3차원 수치 해석 기법을 적용할 경우 1차원과 2차원에서 볼 수 없는 유동 특성 등을 파악할 수 있으며, 보다 정확한 유출 모의가 가능할 것으로 기대된다. 하지만 3차원 해석은 비교적 구조가 단순한 논에 적용하기에는 시간과 비용이 과도하게 소모된다는 단점이 있다. 한편, 상사법칙은 주로 실험의 스케일을 줄이기 위해 적용되어 왔다. 정확성에 대한 검증이 이루어진다면, 시간이 오래 걸리는 3차원 모델링에 상사법칙을 적용할 경우, 모의 시간을 단축시킬 수 있는 장점이 있을 것으로 사료된다. 따라서 본 연구에서는 3차원 수치 해석 모형인 FLOW-3D를 이용하여 논에서의 유출을 모의하고, 적용성을 평가하고자 한다. 또한 상사법칙을 이용하여 모의 시간을 단축할 수 있는 방법을 제시하고자 한다. 모의 대상으로 40m x 100m의 논 포장을 구성하였으며, 강우 및 관개에 따른 유출을 모의하였다. 모의 결과는 실측치 및 기존 연구의 결과와 비교하여 적용성을 평가하였다. 또한 수리학적 상사법칙을 적용하여 조건을 변화시켜가며 유출을 모의하였고, 모의 조건 및 모의 시간 변화에 따른 정확성을 분석하였다. 본 연구에서 제시한 방법은 논에서의 유출 모의의 정확성을 향상 시켜, 홍수 발생 시 농경지의 침수 대책 마련에 기여할 수 있을 것으로 기대된다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.2
• /
• pp.78-88
• /
• 2005

The combustion characteristics of End-Burning hybrid combustor using different types of injector system are numerically investigated to visualize the temperature fields in the combustion chamber The basic characteristics of combustion with different O/F ratio is also analyzed in order to capture the main behavior of diffusion flame inside the swirl induced hybrid combustion chamber It was found that the arrangement of oxidizer injectors give strong effect on the temperature field dominating mixing between fuel and oxidizer. The results show that among five different oxidizer injectors arrangement, the counter flow injector has the highest mixing efficiency. However, the observed high wall temperature presence near the oxidizer injectors remains to be solved.

• Geomechanics and Engineering
• /
• v.1 no.4
• /
• pp.275-289
• /
• 2009

Electroosmosis (EO) is the movement of water in a porous medium under the influence of a direct current (dc). In past decades, electro-osmosis has been successfully employed in many soil improvement and other geotechnical engineering projects. Metal electrodes, such as steel, copper and aluminum have been used traditionally to conduct current. The shortcoming of these electrodes is that they corrode easily during an EO treatment, which results in reduced effectiveness and environmental concerns. More recently, conductive polymers are developed to replace metal electrodes in EO treatment. Electrical vertical drainages (EVDs) are one of these products under trial. The goal of this study is to assess the performance of EVDs for soil improvement and to further understand the scientific principle of the EO process, including the voltage drop at the soil-EVD interface, electrical current density, polarity reversal, and changes in soil physico-chemical properties generated by electroosmosis. It is found from the study that after 19 days of EO treatment with a constant applied dc electric field intensity of 133 V/m, the soil's moisture content decreased by 28%, the shear strength and pre-consolidation pressure increased more than 400%. It is also found that the current density required triggering the water flow in the soil tested, the Korean Yulchon marine clay, is 0.7 $A/m^2$. The project demonstrates that EVDs can serve as both electrodes and drains for soil improvement in short term. However, the EVDs, as tested, are not suitable for polarity reversal in EO treatment and their service life is limited to only 15 days.

• Solar Energy
• /
• v.11 no.1
• /
• pp.61-68
• /
• 1991

Steady laminar natural convection heat transfer from the isothermal square beam attached to an adiabatic plate has been studied for various inclination angles of the adiabatic plate and Rayleigh number by using Mach-Zehnder interferometer in air. As the inclination angles change, the different temperature and fluid flow field were obtained by the ascending heated fluid and the adiabatic plate. In this study, the inclination angles were $0^{\circ}$(positive & negative), $45^{\circ}$(positive & negative), and $90^{\circ}$. The maximum total mean Nusselt number value was found at a positive inclination angle ${\theta}=45^{\circ}$.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.22 no.2
• /
• pp.65-74
• /
• 2011

The Scarites aterrimus (Coleoptera: Carabidae), is one of the carabid beetles dwelling exclusively on coastal sandy dunes. Habitat deterioration and equivalent activity have greatly concerned population declines in several species dwelling on the coastal sandy dunes. As a first step to establish long-term conservation strategy, we investigated the nation-wide magnitude and nature of genetic diversity of the species. As a first step, we sequenced a portion of mitochondrial COI gene, corresponding to "DNA Barcode" region (658 bp) from a total of 24 S. aterrimus individuals collected over nine sandy dunes belonging to four Korean provinces. The sequence analysis evidenced moderate to low magnitude of sequence diversity compared with other insect species distributed in Korean peninsula (0.152% to 0.912%). The presence of closely related haplotypes and relatively high gene flow estimate collectively suggest that there had been no historical barriers that bolster genetic subdivision. Population decline was postulated on the basis of several missing haplotypes that are well found in the species with a large population size. This interpretation is consistent with field observation of small population size in the coastal sandy dune habitats. The highest genetic diversity estimates were found in the coastal sand dune population of Seogwipo, Jeju Island, justifying a prior attention to the population, in order to sustain overall genetic diversity of the species. Further scrutinized study might be required for further robust conclusion.

• Ecology and Resilient Infrastructure
• /
• v.8 no.4
• /
• pp.245-252
• /
• 2021

A turbidity current in a river and a lake occurs due to diverse nutrient loading including suspended sediment in sediment runoff, which affects water withdrawal and river environments. We developed one dimensional time-variant numerical model based on Python for the Nagdonggang mainstream. We examined the numerical stability and the applicability of the model by performing the simulation of quasi-steady flow in non-flooding for three cases, which are different according to the point and the amount of turbidity inflows in the Nagdonggang upstream and a tributary. The result was reasonable in the respect of the conservation of matter. The model will facilitate to simulate a large river if we can secure the data of turbidity variations in a target river reach or measured points in a field.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.25 no.1
• /
• pp.17-27
• /
• 2019

Purpose: Clinical laboratory in hospital has taken a great role in protection of chronic disease. as well as diagnosis and treatment, And laboratory layout has been considered by the management and laboratory section more than the function and workflow. Methods: So this study figures out the workflows of laboratory sections in the recently upgraded Laboratory Medicine, and searches the functional relationships and spatial block diagram between each disciplines as follows. Literature review and expert adviser has been conducted. Results: 1) Laboratory type of Laboratory Medicine is divided into routine and specialized laboratory according to the workflow by automated or specialized test. 2) The general workflow consists of specimen collection, specimen classification, test by discipline, test report, and specimen disposal. 3) Though the function of each laboratory section is very complicated and specific, the characteristics and the workflow can be shown in detail by each lab through [Figure 4], [Figure 5], [Figure 6], [Figure 7], and [Figure 8]. 4) Functional relationship diagram can be displayed to the adjacency and relation between each laboratory and support spaces. 5) The spatial block diagram could be presented as shown in [Figure 10], in which the emergency lab lay in front side, routine lab in the central open area, and specialized lab in the behind side. Implications: This study can be used as a useful data in planning and designing a Laboratory Medicine Department.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.989-1002
• /
• 2018

Grouting for the rock joint is to strengthen the rock strata by infiltrating cement grout materials into the rock joints. Grouting is one of a field of study which is difficult to develop deterministic and quantitative design approach because of multiphase behaviors of grout materials and 3 dimensional features of rock joints. Therefore, GIN (Grouting Intensity Number) can be a good index with appropriate monitoring of pressure and volume of grout. In this paper, we investigate the effects of joint roughness (JRC) and rheology of cement material during the infiltration of cement grout material into rock joint through CFD (computational fluid dynamics) analyses. With rough joint surface and increase of WC ratio, the frictional resistance during the grouting increases. The results have been summarized with polynomial correlations.

• Fashion & Textile Research Journal
• /
• v.21 no.4
• /
• pp.432-451
• /
• 2019

Companies and brands that practice sustainability pay attention to New Media due to its ability to build a sustainable relationship between companies and consumers. The need for research on specific roles, characteristics, and social media effects on eco-friendly advertising has had rapid growth in marketing programs for sustainable activities especially shown through social media. Information about sustainable fashion has spread to consumers through social media, and multifarious efforts have been made to attract the attention of youth. Despite the dramatic increase in eco-friendly marketing through social media as a part of sustainability, there is a lack of research on the major influences of emotional factors such as ad color and expression in social media. In this context, it is meaningful to identify relationships between emotional responses, advertising value and consumer behavior of sustainable fashion brands in Instagram and implement a suitable advertising type (color vs expression) for consumers. We used 366 responses for the final analysis. Data were analyzed by factor analysis, structural equation modeling using SPSS 18.0 and AMOS 18.0. The results of this study suggest that emotional responses, advertising value have a significant effect on the flow. This study expands on a previously limited research field by verifying consumer responses to image advertising on Instagram, rather than general sustainable fashion marketing. The study results also provide meaningful implications for a relation formation between customers and fashion brands vis-${\grave{a}}$-vis sustainable social media marketing.

• Journal of radiological science and technology
• /
• v.42 no.1
• /
• pp.53-59
• /
• 2019

In the field of nuclear medicine, the various static phantoms of international standards are used to assess the performance of the nuclear medicine equipment. However, we only reproduced a fixed situation in spite of the movement of the cardiac, and the demands for dynamic situations have been continuously raised. More research is necessary to address these challenges. This study used flexible materials to design the dynamic cardiac phantom, taking into account the various clinical situations. It also intended to reproduce the images through dynamic cardiac flow to confirm the usefulness of the proposed technique. The frame of dynamic cardiac phantom was produced based on the international standard phantom. A nuclear medicine dynamic cardiac phantom was produced rubber material and silicone implemented by 3D printing technique to reproduce endocardium and epicardium movement. Therefore we compared and evaluated the image of a cardiac phantom made of rubber material and a cardiac phantom made of silicone material by 3D printing technique. According to the results of this study, the analysis of the Summed Rest Score(SRS) showed abnormalities in the image of a cardiac phantom made of rubber material at 10, 20, and 30 stroke rates, but the image of a cardiac phantom made of silicone material by 3D printing technique showed normal levels. And the analysis of the Total Perfusion Deficit(TPD) showed that TPD in the image of a cardiac phantom made of rubber material was higher than that of the image of a cardiac phantom made of silicone material by 3D printing technique at 10, 20, and 30 stroke rates. The potential for clinical application of the proposed method was confirmed in the dynamic cardiac phantom implemented with 3D printing technique. It is believed that the objective information secures the reliability of inspection equipment and it contributes to improve the diagnostic value of nuclear medicine.