• Tunnel and Underground Space
• /
• 제11권2호
• /
• pp.156-166
• /
• 2001

A stochastic continuum(SC) modeling technique was developed to simulate the groundwater flow pathway in fractured rocks. This model was developed to overcome the disadvantageous points of discrete fracture network(DFN) modes which has the limitation of fracture numbers. Besides, SC model is able to perform probabilistic analysis and to simulate the conductive groundwater pathway as discrete fracture network model. The SC model was formulated based on the discrete fracture network(DFN) model. The spatial distribution of permeability in the stochastic continuum model was defined by the probability distribution and variogram functions defined from the permeabilities of subdivided smaller blocks of the DFN model. The analysis of groundwater travel time was performed to show the consistency between DFN and SC models by the numerical experiment. It was found that the stochastic continuum modes was an appropriate way to provide the probability density distribution of groundwater velocity which is required for the probabilistic safety assessment of a radioactive waste disposal facility.

• Journal of Broadcast Engineering
• /
• 제21권5호
• /
• pp.672-688
• /
• 2016

This paper confirmed the roles of images of performance arts, through an analysis of the performance arts realizing media augmented reality, and proceeded audience studies through t-test for verifying the results. As a result, the images used for the performance arts interacted with the audiences through mixing of media, and led to satisfaction for the performance through strong flow and understanding. For some parts, however, an indiscreet use of images caused audiences, who are still familiar with traditional performance arts, to react exclusively toward the media. Eventually, at this time trying new change, convergence media performance arts with images need to orchestrate performance arts and media, so that multiple audiences can easily understand and enjoy, and make an effort to let the audiences get satisfaction based on various experiences. For this, a producer should dedicate to create strategic performance arts contents that can provide professional new knowledge and information, considering even audiences' recognition, as well as their perceptional and psychological characteristics.

• Tunnel and Underground Space
• /
• 제30권3호
• /
• pp.242-255
• /
• 2020

The numerical simulations of Heater Experiment-D (HE-D) at the Mont Terri rock laboratory in Switzerland were performed to investigate an applicability of FLAC3D to reproduce the coupled thermo-hydro-mechanical (THM) behaviour in Opalinus Clay, as part of the DECOVLEX-2015 project Task B. To investigate the reliability of numerical simulations of the coupled behaviour using FLAC3D code, the simulation results were compared with the observations from the in-situ experiment, such as temperature at 16 sensors, pore pressure at 6 sensors, and strain at 22 measurement points. An anisotropic heat conduction model, fluid flow model, and transversely isotropic elastic model in FLAC3D successfully represented the coupled thermo-hydraulic behaviour in terms of evolution for temperature and pore pressure, however, performance of the models for mechanical behavior is not satisfactory compared with the measured strain.

• Journal of the Korea Society for Simulation
• /
• 제15권2호
• /
• pp.1-12
• /
• 2006

As the needs of intelligent systems increase, there have been diverse approaches that combine artificial intelligence (AI) and simulation in the last decade. RG-DEVS, which is the basis for this paper, embedded AI planning techniques into the simulation modeling methodology of DEVS, in order to specify dynamically a simulation model. However, a hierarchy concept, which is used for various types of problem solving systems. is not included in the planning of RG-DEVS. The hierarchy concept reduces the computational cost of planning by reducing the search space, and also makes it easy to apply the hierarchical process flow of a target system to planning. This paper proposes Hierarchical RG-DEVS (HRG-DEVS) in an attempt to insert hierarchical planning capability into RG-DEVS. For the verification of the proposed modeling methodology, HRG-DEVS is applied to model the block's world problem of ABSTRIPS, which is a classical planning problem.

• Journal of Korean Society of Transportation
• /
• 제27권5호
• /
• pp.169-177
• /
• 2009

Establishing a public transportation transfer system that can reduce personal automobile use in the CBD and absorb the demand, thereby reducing congestion, is a necessity. However, the current transfer system and facilities are lacking in intermodal connectivity, require long transfer times, have complex flow patterns, and are lacking in information systems and convenience. The design analysis program of this study is to develop a program that executes computations of design analysis of transfer facilities by utilizing the existing design standards for facilities such as facilities for boarding and alighting, elements for convenience, and pedestrian facilities. Developing an analytical tool through which individual or integrated design analysis can be conducted on the design standards of various facilities is an important study for improving the work accuracy and efficiency of designing an actual transfer center.

• Clean Technology
• /
• 제9권2호
• /
• pp.71-79
• /
• 2003

The selective catalytic reduction (SCR) process is the most widely applied technology for the denitrification of coal-fired power plant flue gases due to its selectivity and high efficiency. In order to attain the optimum design of SCR process, it is required to consider various catalysis characteristics as well as various operating conditions. A systematic study to elucidate the effects of the design conditions(reaction temperature, $NH_3/NO$ mole ratio, space velocity and linear velocity) on the reduction of NOx using the SCR pilot plant with maximum flue gas flow rate of $1,000Nm^3/hr$ was carried out and employed to identify the optimum design parameters. Design approaches of SCR process with test results were also presented.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제23권9호
• /
• pp.17-23
• /
• 2009

Interest in application of ultraviolet light technology for primary disinfection of potable water in drinking water treatment plants has increased significantly in recent years. The efficacy of disinfection processes in water purification systems is governed by several key factors, including reactor hydraulics, disinfectant chemistry, and microbial inactivation kinetics. The objective of this work was to develop a computational fluid dynamics(CFD) model to predict velocity fields, mass transport, chlorine decay, and microbial inactivation in a continuous flow reactor. The CFD model was also used to evaluate disinfection efficiency in alternative reactor designs. In a typical operation, water enters the inlet of a UV lamp and flows through the annular space between the quartz sleeve and the outside chamber wall. The irradiated water leaves through the outlet nozzle. In this paper, it describe the how to design optimal ultraviolet disinfection device for ground water and rainwater. To search the optimal design method, it was performed computer simulation with 3D-CFD discrete ordinates model and manufactured prototype. Using proposed design method, performed simulation and proved satisfied performance.

• Transactions of the Korean Society of Mechanical Engineers
• /
• 제15권6호
• /
• pp.2171-2180
• /
• 1991

An analysis model for off-design performance of radial inflow turbines with or without variable area guide vane is developed, where two important factors in loss models, total pressure ratio between variable area guide vane exit and scroll casing inlet and rotor loss coefficient are determined without experimental data. The analysis results show that the predicted trends with or without variable area guide vane are consistent with the experimental observations. The comparison of present method with the well-known NASA off-design performance analysis program shows that the mass flow rate and static efficiency by present analysis are in good agreement with those by the NASA program. Therefore, this method can be used to predict off-design performance of radial inflow turbines with validity of the loss models used by present analysis.

• Journal of the Korea Computer Graphics Society
• /
• 제17권2호
• /
• pp.45-53
• /
• 2011

This paper proposes a volume meshing method that fills the inside of an object with tetrahedra, of which dihedral angles are good. The suggested method is fast, stable and easy to implement It can also utilize an octree structure to space-efficiently fill an object with graded tetrahedra by reducing the total number of tetrahedra. To obtain a high-quality mesh with good dihedral angles, we restrict the octree such that any pair of neighboring cells only differs by one level. To efficiently construct a restricted-octree and generate a volume mesh from the octree, we utilize a signed distance field of an object on its bounded workspace. The suggested method can be employed in FEM-based simulation of large elasto-plastic deformation and tetrahedral-mesh-based simulation of fluid flow.

• Journal of Advanced Navigation Technology
• /
• 제12권1호
• /
• pp.34-45
• /
• 2008

Broadcast encryption schemes are applied to transmit digital informations of multimedia, software, Pay-TV etc. in public network. User acquires message or session key to use key that broadcaster transmits, broadcaster need process that generation and distribution key in these process. Also, user secession new when join efficient key renewal need. In this paper, introduce about efficient key generation and distribution, key renewal method. The temporary conference environment base structure against an each mobile device wild gap. Without the transmission possible, it follows infrequent location change and with the quality where the key information change flow. Thus, in this paper, in order to apply to the embedded computing environment and the key generation and the efficient key renewal are done when the mobile device is used of the specify space it proposes.