• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.1
• /
• pp.57-67
• /
• 2013

In Korea, there are debris-flow disasters induced by typhoon and localized torrential rainfall annually. There are particularly extensive debris-flow disasters in Gangwon-do because of its geomorphological characteristics; the extensive coverage of mountainous region, steep slope, and shallow soil. In this paper, we constructed a GIS database about topological characteristics of debris-flow basin in Gangwon-do by years of field survey. Also, we conducted frequency analysis based on this database with the digital forest type map and the digital soil map. We analyzed frequencies of debris-flow by simple count for topological characteristics, whereas we analyzed by considering an area ratio based on GIS for physiognomic and geologic characteristics. We used slope, aspect, width, depth and destruction shapes for analysis about topological characteristics of debris-flow basin. Also we used attributes of forest physiognomy, diameter, age, and density about physiognomic characteristics, and i n terms of geologic characteristics, we used attributes of drainage class, effective soil depth, subsoil properties, subsoil grave content, erosion class, parent material of soil, and topsoil properties. In consequence, we figured out topographic, forest physiognomic, and geologic characteristics of debris-flow basin. This result is applicable to establish a rational disaster prevention policy as a fundamental information.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.356-361
• /
• 1997

To investigate parametric effect on CHF and to get CHF data, experimental study has been performed with vertical round tubes under the condition of low pressure and low flow (LPLF). Test sections are made of Inconel-625 tube and have the geometry of 8 and 10 mm in diameter, and 0.5 and 1.0 m in heated length. All experiments have been conducted at the pressure of under 9 bar, the mass flux of under 250 kg/$m^2$ and the inlet subcooling of 350 and 450 kJ/kg, for stable upward flow with water as a coolant. Flow regime analysis has been performed for obtained CHF data with Mishima's flow regime map, which reveals that most of the CHF occur in the annular-mist flow regime. General parametric trends of the collected CHF data are consistent with those of previous studies. However, for the pressure effect on CHF, two different are observed; For relatively high mass flux, CHF increases with pressure and far lower mass flux, CHF decrease with pressure. Using modern data regression tool, ACE algorithm, two new CHF correlations for LPLF condition are developed based on local condition and inlet condition, respectively. The developed CHF correlations show better prediction accuracy compared with existing CHF prediction methods.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.2
• /
• pp.144-151
• /
• 2003

An experimental study was carried out in a uniformly heated horizontal tube to examine heat transfer characteristics of pure refrigerants, R134a and R123, and their mixtures during flow boiling. The flow pattern was also observed through tubular sight glasses with an internal diameter of 10 mm located at the inlet and outlet of the test section. Tests were run at a pressure of 0.6 MPa and in the heat flux ranges of 5~100 kW/$m^2$, vapor Quality 0~100 percent and mass velocity of 150-600 kg/$m^2$s. The observed flow patterns were compared to the flow pattern map of Kattan et al., which predicted well the present data over the entire range of mass velocity employed in this study. Heat transfer coefficients of the mixture were less than the interpolated values between pure fluids both in the low quality region where the nucleate boiling is dominant and in the high quality region where the convective evaporation is dominant.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.154-154
• /
• 2021

Since the development of Bubble Image Velocimetry (BIV) technique as the complementary technique of Particle Image Velocimetry (PIV), the application of digital imaging technique in the field of hydraulic and coastal engineering increased rapidly. BIV works very well in multi-phase flow (air-water) flows where the PIV technique doesn't. However, the velocity field obtained from BIV technique often resulted in a velocity vector on the outside of the flow (false velocity) since the Field of View (FOV) usually not only cover the air-water flow but also the area outside the flow. In this study, a simple technique of post processing velocity field was developed. This technique works based on the average of the pixel value in the interrogation area. An image of multi-phase flow of wave overtopping was obtained through physical experiment using BIV technique. The velocity calculation was performed based on the similar method in PIV. A velocity masking technique developed in this study then applied to remove the false velocity vector. Result from non-masking, manually removed and auto removed false velocity vector were presented. The masking technique show a similar result as manually removed velocity vector. This method could apply in a large number of velocity field which is could increase the velocity map post-processing time.

• Journal of radiological science and technology
• /
• v.26 no.3
• /
• pp.25-31
• /
• 2003

This study was performed to evaluate the usefulness of Deconvolution perfusion CT in patients with acute cerebral infarction. Nine patients with acute cerebral infarction underwent conventional CT and cerebral perfusion CT within 23 hours of the onset of symptoms. The perfusion CT scan for each patient was obtained at the levels of basal ganglia and 1cm caudal to the basal ganglia. By special imaging software, perfusion images including cerebral blood volume(CBV), cerebral blood flow(CBF), and mean transit time(MTT) maps were created. The created lesions were evaluated on each perfusion maps by 3 radiolocical technician. MTT delay time was measured in the perfusion defect lesion and symmetric contralateral normal cerebral hemisphere. Lesion sire were measured on each perfusion map and compared with the value obtained by diffusion weighted MR imaging(DWMRI). All perfusion CT maps showed the perfusion defect lesion in all patients. There were remarkable CT delay in perfusion defect lesion. In comparison of lesion size between each perfusion map and DWMRI, the lesion on CBF map was the most closely correlated with the lesion on DWMRI(7/9). The size of perfusion defect lesion on MTT map was larger than that of lesion on DWMRI, suggesting that m map can evaluate the ischemic penumbra. Deconvolution Perfusion CT maps make it possible to evaluate not only ischemic core and ischemic penumbra but also hemodynamic status in perfusion defect area. These results demonstrate that perfusion CT can be useful to the diagnosis and treatment in the patients with acute cerebral ischemic infarction.

• Journal of Digital Convergence
• /
• v.14 no.12
• /
• pp.231-236
• /
• 2016

Currently, a traffic monitoring service using a surveillance camera is provided through internet. In general, if the user points a certain location on a map, then this service shows the real-time image of the camera where it is mounted. In this paper, we proposed the intuitive surveillance monitoring system which displays a real-time camera image on the map by warping with bird's-eye view and with the top of image as the north. In order to robustly estimate the road plane using camera image, we used the motion vectors which can be detected to changes in brightness. We applied a re-adjustment process to have the same directivity with a map and presented a user-friendly interface that can be displayed on the map. In the experiment, the proposed method was presented as the result of warping image that the user can easily perceive like a map.

• Journal of the Korean association of regional geographers
• /
• v.17 no.1
• /
• pp.40-57
• /
• 2011

A feng-shui map is a kind of map that features such propitious positions as fortune-bringing spots or ideal grave sites. The map is a representation of the most ideal natural terrains in terms of feng-shui perspectives. This study did research on two feng-shui maps registered on some genealogical tables in order to see how the map was drawn up. In addition, the detailed characteristics of landform expressions like the frame of the map, viewpoints, center-oriented mapping, water flow, mountain theories were delved into. The results of the research are as follows: the feng-shui maps for this research used the techniques of double scale and aerial view, described terrains with grave sites in their centers, and enlarged important terrains compared with surroundings for exaggeration purposes. In addition, other vital landforms not observed from grave sites were depicted with viewpoints moved and were represented in fine details. The part of mountain theories had the following points as their main subject matter: geographical locations, overall orientations of mountain ranges, topographical traits, grave seat directions and surrounding terrains.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.92-95
• /
• 2010

본 논문에서는 2차원 영상을 3차원 영상으로 변환하여 입체감을 주는 방법을 제안하였다. 2D/3D 변환을 위해 Normalized Cut을 사용하여 객체를 분할하였고, 분할된 객체에 Optical Flow 값을 계산해 깊이정보를 생성하여 입체감을 주었다. 객체를 분할하기 위해 Normalized Cut을 이용한 방법에 Optical Flow를 이용한 가중치 값을 추가하여 정확한 객체 분할을 하였고, 처리속도 향상을 위해 영상의 밝기, 색상을 고려한 Watershed 알고리즘을 적용하여 연산량을 줄였다. 분할된 영상에 Optical Flow를 이용하여 색상 정보의 차이를 통해 객체별 고유벡터 값을 연산하여 객체의 움직임 정보를 추출하고 운동시차를 고려해 깊이 정보를 생성하였다. 제안한 방법으로 변환하기 위해 MATLAB을 사용하였다. 제안한 변환 방법은 2D/3D 입체변환에 효과적이었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.69-72
• /
• 2011

In this paper, we propose a method to track the movement of camera from the video sequences. This method is useful for video analysis and can be applied as pre-processing step in some application such as video stabilizer and marker-less augmented reality. First, we extract the features in each frame using corner point detection. The features in current frame are then compared with the features in the adjacent frames to calculate the optical flow which represents the relative movement of the camera. The optical flow is then analyzed to obtain camera movement parameter. The final step is camera movement estimation and correction to increase the accuracy. The method performance is verified by generating a 3D map of camera movement and embedding 3D object to the video. The demonstrated examples in this paper show that this method has a high accuracy and rarely produce any jitter.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.11
• /
• pp.1437-1448
• /
• 1997

Pressures of a five-hole probe were measured for a full range of yaw and pitch angles and complete pressure coefficient maps were obtained. Based on these maps, various features of five-hole probe pressures were revealed and new five-hole probe calibration coefficients were devised. The new calibration coefficients show non-diverging characteristics for any flow direction and one-to-one correspondence for a wide range of flow angles. These calibration coefficients expand the valid flow angle range of five-hole probe calibration by .+-.10 degrees and complement a critical defect of five-hole probe zone-division calibration method which has not been known yet. Moreover new non-diverging calibration coefficients have advantages in nulling methods, too.