• KIEE International Transaction on Systems and Control
• /
• 제2D권2호
• /
• pp.78-91
• /
• 2002

In the thermal power plant, there are six manipulated variables: main steam flow, feedwater flow, fuel flow, air flow, spray flow, and gas recirculation flow. There are five controlled variables: generator output, main steam pressure, main steam temperature, exhaust gas density, and reheater steam temperature. Therefore, the thermal power plant control system is a multinput and output system. In the control system, the main steam temperature is typically regulated by the fuel flow rate and the spray flow rate, and the reheater steam temperature is regulated by the gas recirculation flow rate. However, strict control of the steam temperature must be maintained to avoid thermal stress. Maintaining the steam temperature can be difficult due to heating value variation to the fuel source, time delay changes in the main steam temperature versus changes in fuel flow rate, difficulty of control of the main steam temperature control and the reheater steam temperature control system owing to the dynamic response characteristics of changes in steam temperature and the reheater steam temperature, and the fluctuation of inner fluid water and steam flow rates during the load-following operation. Up to the present time, the Proportional-Integral-Derivative Controller has been used to operate this system. However, it is very difficult to achieve an optimal PID gain with no experience, since the gain of the PID controller has to be manually tuned by trial and error. This paper focuses on the characteristic comparison of the PID controller and the modified 2-DOF PID Controller (Two-Degrees-Freedom Proportional-Integral-Derivative) on the DCS (Distributed Control System). The method is to design an optimal controller that can be operated on the thermal generating plant in Seoul, Korea. The modified 2-DOF PID controller is designed to enable parameters to fit into the thermal plant during disturbances. To attain an optimal control method, transfer function and operating data from start-up, running, and stop procedures of the thermal plant have been acquired. Through this research, the stable range of a 2-DOF parameter for only this system could be found for the start-up procedure and this parameter could be used for the tuning problem. Also, this paper addressed whether an intelligent tuning method based on immune network algorithms can be used effectively in tuning these controllers.

• 한국정밀공학회지
• /
• 제17권2호
• /
• pp.151-160
• /
• 2000

An experimental and theoretical analysis for the improvement of dynamic characteristics and design of electro-hydraulic flow control servo valve are performed. The theoretical results are compared with the experimental step responses, and the important design parameters of an electro-hydraulic flow control servo valve are derived by using the simulation program. Simulation parameters of nozzle jet coefficient and orifice and spool valve discharge coefficient are given through experiment. The theoretical and experimental step response curves show that the valve gain depends on the fixed orifice and nozzle $ratio(R_on)$ and is maximum at $R_on=1.$ And drain orifice in the flapper - nozzle return line creates a small back pressure, which improves the performance fur the valve.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.67-74
• /
• 2008

The regional-scale transient groundwater-river interaction model is developed to gain a better understanding of the regional-scale relationships and interactions between groundwater and river system and quantify the residual river flow after groundwater abstraction from the aquifers with climate variability in the Waimea Plains, New Zealand. The effect of groundwater abstraction and climate variability on river flows is evaluated by calculating river flows at the downstream area for three different drought years (a 1 in 10 drought year, 1 in 20 drought year, and 1 in 24 drought year) and an average year with metered water abstraction data. The effect of future water demand (50 year projection) on river flows is also evaluated. A significant increase in the occurrence of zero flow, or very low flow of 100 L/sec at the downstream area is predicted due to large groundwater abstraction increase with climate variability. Modeling results shows the necessity of establishing dynamic cutback scenarios of water usage to users over the period of drought conditions considering different climate variability from current allocation limit to reduce the occurrence of low flow conditions at the downstream area.

• Journal of Information Technology Applications and Management
• /
• 제16권4호
• /
• pp.59-77
• /
• 2009

Microblog services are such new communication channels with some considerable potential to improve information sharing. The idea of sharing short messages using multiple access points seems to be appealing to people worldwide. Through the lens of flow and social identity, we explored factors that influence information sharing behaviors in microblog services. With an empirical study, we examined enjoyment and concentration(flow) and self-presentation(social identity) in microblog services like twitter can contribute to the user behaviors. Our aim was to gain insight into ways of creating an environment that facilitating voluntary sharing of information. Our findings suggested that enjoyment, concentration, and selfpresentation were crucial determinants of information sharing behaviors in microblog services. This study has important implications for academic researchers and practitioners who seek to understand why microblog service users share their information with other members in microblog services.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.107-110
• /
• 2003

We have proposed a model to describe the current-voltage characteristics of fabricated devices using the Biot-Savart's law in order to develop superconducting flux flow transistors, The measured and calculated values, including induced voltage, transresistance and current gain were investigated in relation to the parallel flow of the vortices in a single microbridge. The predictions agreed very well with measured results.

• 한국인쇄학회지
• /
• 제24권2호
• /
• pp.1-10
• /
• 2006

In the past few years, the printing industry has witness a trend that has become ever more defined: due to the advent of digital technology, the production of short print runs has continued to gain in importance. An important initiative for the support of digital work flow in the manufacturing of printed products is CIP4 consortium. CIP4 stands for "International Cooperation for Integration of Prepress, Press and Post-press, it is an association of around forty international companies, mostly manufacturers of prepress, press and post-press, as well as suppliers and users. In this paper, we studied on the acting application of CIP4 work flow.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2589-2593
• /
• 2008

In a fuel cell vehicle using polymer electrolyte membrane fuel cell(PEMFC), hydrogen is over-supplied to gain higher stack efficiency. So it is needed considering fuel efficiency to re-circulate hydrogen which is not reacted in stack. And to re-circulate hydrogen, a blower or an ejector is used. Ejector re-circulation system has several merits compared with blower system, for example no parasite energy, simple structure and no lubrication system. But the secondary flow of an ejector in fuel cell vehicle, has high humidity because of crossover problem in stack. Therefore in this paper, ejector is designed by 1-D modeling and CFD with the primary and secondary flow of hydrogen. And the ejector which has the primary and secondary flow of air, is designed to have the same Reynolds number and Mach number at the nozzle exit as the hydrogen ejector's. And this air ejector is tested while the humidity of the secondary flow is varied.

• 한국광학회지
• /
• 제1권1호
• /
• pp.58-64
• /
• 1990

광음향 변조기를 사용하여 전방산란 이중광속 LDV를 구성하고 유리관 속을 흐르는 물의 방향을 조사하였다. 하나의 레이저 빔을 40MHz로 변조시킬 때 회절된 빔의 차수 및 유체의 방향에 따라서 이동된 Doppler 신호의 주파수를 측정함으로써 유체의 방향을 결정하였다. 또한 LDV 장치의 검출기에서 검출된 고주파 신호를 증폭하기 위하여 대역폭이 0-300MHz이고 이득이 38dB인 증폭회로를 설계 제작하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제8권1호
• /
• pp.75-82
• /
• 1995

Two digestion trials were conducted to investigate the effect of feeding heated soybean meal (HSBM) on ruminal and post-ruminal digestion of organic matter (OM) and nitrogen (N), bacterial N flow to the duodenum and N balance in young calves weaned at 6 weeks of age. In trial 1, calves were fed concentrate diets containing soybean meal (SBM) or HSBM and hay mixed in the ratio of 6:4 to support daily weight gain of 0.5 kg. The same concentrate diets were used in trial 2, but the ratio of concentrate to hay was 7:3 to support body weight gain of 0.7 kg/d. Measurements were made 10 and 13 weeks of age in trial 1, and at 10 and 15 weeks in trial 2. Ruminal OM digestibility increased with advancing age in both trials. Ruminal OM digestion was not affected by the diets in trial 1, but it was greater for the SBM diet than for the HSBM diet at 10 weeks in trial 2. Net N loss from the rumen was lover for the HSBM diet than for the SBM diet in trial 1, but it was not affected by the diets in trial 2. Bacterial N flow to the duodenum, N digestion in the total digestive tract and N retention were not affected by the diets in either of the trials.

• 한국항행학회논문지
• /
• 제17권1호
• /
• pp.107-114
• /
• 2013

본 논문에서는 무인항공기 터보제트 엔진의 가속도를 제어하는 제어기를 제안한다. 압축기 회전 속도를 추정하기 위해 고이득 관측기를 사용하고 퍼지 추론 기법과 PID 제어 알고리즘을 적용하는 터보제트 엔진 제어기를 설계한다. 터보제트 엔진의 가 감속 시 서지현상과 flame-out 현상을 방지하기 위해 연료 유량 제어 입력을 퍼지 PID 제어기로 생성한다. 기준 가속도를 설정하고 연료유량 제어를 퍼지추론에 의해 정하도록 한다. 제안된 제어기의 성능을 확인하기 위해 MATLAB을 사용한 컴퓨터 시뮬레이션을 수행하였다.