• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1308-1311
• /
• 2004

It is very important that get polishing characteristic that to be stable that accomplish planarization of high efficiency in chemical mechanical polishing, and there is repeatability Groove of pad causes much effects in flow of slurry among various factors that influence in polishing characteristic, is expected to cause change of lubrication state and polishing characteristic in contact between wafer and pad. Therefore, divided factors of pad groove by groove pattern, groove profile, groove dimensions. This research wishes to study effect that dimension of pad groove gets in polishing performance. When changed dimension (width, depth, pitch of groove) of groove, measured change of removal rate and friction force. According as groove dimension changes, could confirm that removal rate and friction force change. While result of this experiment studies effect of pad groove in CMP, it is expected to become small help.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.213-217
• /
• 2005

In this study the water including sediment is assumed that the density is different from fresh water. And the phenomenon inhaled by low pressure around the pipe is numerically simulated in two dimension. The simulation is done using finite difference method in rectangular staggered mesh system and Navier-Stokes equations and continuty equation are employed as governing equations. The method of Irregular leg lengths and stars are adopted to satisfy boundary condition of body boundary. Marker-Density method is used to calculate the density of mixed flow. Also SGS turbulence model is applied to consider vortex smaller then grid at high Renolds number. This study is to analyze inhalation phenomenon of mixed flow with sediment and to verify the numerical method for mixed flow. To verify the numerical results are compared with experimental results

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.1-8
• /
• 2005

This paper addresses the analysis of the combustion characteristics in the oil burner using swirl flow. The reduction of exhaust emissions and high efficiency combustion techniques of the industrial burner have been studied to conserve environmental resources. We make swirl burner equal to dimension of wide burner and it is turn round of the combustion gas in construction. For a vigorous inner flow possessde 3m/s velocity in combustion gas of two burners. In calculation, we make use of a densely mesh to detailed analysis. In this study, the effect of swirl flow on the combustion of a commercial burner is analysed by experimental and also simulative manner. The results show the swirl burner has 40% better efficiency and less emissions of CO, HC, NOx and Smoke.

• 대한기계학회논문집B
• /
• 제25권8호
• /
• pp.1097-1102
• /
• 2001

For the purpose of development of high performance gasoline engine, the design technique of the 5-valve(3 intake valves) combustion chamber for a subcompact vehicle has been studied. 3 intake valves cylinder heads were designed by using a 3-dimension CAD program, and steady state flow experiments have been performed with these model. The 5-valve engines, which have larger valve opening areas, have larger intake flow rates and higher flow coefficient than the 4-valve engines. The effects of intake port design parameters of a 5-valve engine on the intake flow rate and bore size were studied, and the design guidelines for the 5-valve engine were established.

• 설비공학논문집
• /
• 제13권11호
• /
• pp.1134-1140
• /
• 2001

In the present study, heat transfer characteristics of oil flow over offset strip fins were predicted by the numerical methods. Oil flow in the plate-fin passage was idealized by 2 dimension. Power law scheme and SIMPLE algorithm were used for convective diffusion formulation and pressure term respectively. Governing equations were discretized by control volume formulation. The flow patterns and heat transfer were predicted in details. The convective heat transfer coefficients were affected by separation bubbles which appeared at the wake region of offset strip fins.

• 한국가시화정보학회지
• /
• 제21권3호
• /
• pp.23-32
• /
• 2023

This study aims to explore the heat transfer and flow phenomena inside an instant water heater and the influence of the design parameters of the water heater on the heating performance was investigated by 3-D numerical simulations considering heat convection. The design parameters are the heating ceramic dimension, the power of the heating device, and the water flow rate. The results show that a reasonable space for the heating device is required to optimize the heating performance. It is desirable to design higher heating device as possible for a given electric power. There exists a critical water flow rate that best meets the heating performance. The change in electric power has no impact on the flow phenomena and heating performance.

• 한국콘텐츠학회논문지
• /
• 제7권4호
• /
• pp.83-90
• /
• 2007

Flow는 심리학 분야로부터 차용되어 컴퓨터와 인터넷 사용 시 사용자의 긍정적 경험을 설명하는 주요 개념으로 이용되고 있다. 컴퓨터 매개환경(CME: Computer-Mediated Environment)에서 flow 경험은 탐구적 행위와 통신, 학습을 촉진시키며 긍정적 감성을 유발한다고 한다. 본 연구에서는 컴퓨터 매개환경과 전통적인 지필(紙筆)(paper-pencil)환경에서의 비교 실험을 통해, 매체환경(media environment) 간 사용자의 flow 경험 차이를 검증하였다. 실험결과, '재미(enjoyment)' 이외의 대부분의 flow 경험 차원(dimension)에서 매체환경 간 차이를 보이지 않았다. 그러나 사용자들이 느끼는 시간감각의 왜곡(distorted sense of time)은 두 매체환경 간에 유의한 차이가 있는 것으로 나타났다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 추계 학술대회논문집
• /
• pp.86-91
• /
• 2000

Automatic method for generation of mesh and three dimension natural convection flow result adapted by this method are presented in this paper. It lake long time to meshing com plex 3-D geometries, and It's difficult to clustering grid at surface boundary. Octree structure resolve this difficulty.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.189-190
• /
• 2005

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2009년도 정기 학술발표대회
• /
• pp.150.2-150.2
• /
• 2009