• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 1995년도 학술발표회 논문집
• /
• pp.34-41
• /
• 1995

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.119-127
• /
• 2011

본 논문은 장거리 터널 내에서 운송체의 고속운행에 의해 발생한 유동을 해석하기 위한 격자 기법 개발에 관한 내용이다. 수십 km의 터널 시스템을 3차원으로 해석하기 위해서는 많은 수의 격자가 요구된다. 그러나 전체 터널 시스템을 3차원으로 계산한다는 것은 비효율적이다. 그리하여 본 논문에서 계산의 효율성을 위해 터널 내 유동장에 영향을 크게 주는 달리는 운송체 주위, 정거장과 환기구는 3차원으로 격자를 구성하였고 그 외의 직전 터널 구간은 1차원 격자로 구성하였다. 터널 내의 유동은 열차가 달릴 때 생성되는 열차 주위의 유동에 의해 결정된다. 그러므로 열차 주위에는 격자를 조밀하게 생성시켜 주었다. 그리고 이 격자는 열차가 이동할 때 함께 움직이도록 하여 격자의 질을 유지하게 하였다. 열차의 운행 속도는 가속, 등속, 감속의 3단계로 구분하였다. 이와 같은 장거리 터널 내 비정상 고속 운송체 유동을 해석하기 위해 상용 소프트웨어인 Ansys vr. 12.0의 UDFs(User-Defined Functions) 기능을 사용하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 제4회 압출 및 인발가공 심포지엄
• /
• pp.1-12
• /
• 2001

In cold forging of piston-pin for automobile parts, the flow defect appears by the dead metal zone. This appearance evidently happens in products with a thin piercing thickness for the dimension accuracy and the decrease of material loss. The best method that can prevent flow defect is removing dead metal zone. The purpose of this study is to investigate the material flow behavior of forward-backward extruded piston-pin through the relative velocity ratio and the stroke control of upper moving punch & container using the flow control forming technique. The finite element simulations are applied to analyse the flow defect, then the results are compared with the plasticine model material experiments. Finally, the model experiment results are in good agreement with the FE simulation ones.

• 대한기계학회논문집A
• /
• 제26권7호
• /
• pp.1366-1375
• /
• 2002

In cold forging of piston-pin for automobile parts, the flow defect appears by the dead metal zone. This appearance evidently happens in products with a thin piercing thickness for the dimension accuracy and the decrease of material loss. The best method that can prevent flow defect is removing dead metal zone. The purpose of this study is to investigate the material flow behavior of forward-backward extruded piston-pin through the relative velocity ratio and the stroke control of upper moving punch & container using the flow control forming technique. The finite element simulations are applied to analyse the flow defect, then the results are compared with the plasticine model material experiments. The model experiment results are in good agreement with the FE simulation ones.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.155-158
• /
• 2000

Flow defect of a piston-pin for automobile parts is investigated in this study. In cold forging of piston-pin Lapping defect a kind of flow defect appears by the dead metal zone. This appearance evidently happens in products with a thin piercing thickness for the dimension accuracy and the decrease of material loss. The best method that can prevent flow defect is removing dead metal zone. The finite element simulations are applied to analyze the flow defect. This study proposed processes for preventing flow defect by removing dead metal zone. Then the results are compared with the experiments for verification. These FE simulation results are in good agreement with the experimental ones.

• 대한기계학회논문집A
• /
• 제21권5호
• /
• pp.800-808
• /
• 1997

Decision process for length dimension in the mechanical system design process has been studied with a washing machine transmission as a model. The results are, (i) the length dimensions of the non-shaft elements are independent of other elements, (ii) the length dimensions of the shaft elements are dependent on the dimensions of the non-shaft elements located inside and outside of that elements, (iii) the length dimensions of the inner shaft elements are dependent on those of the outer shaft elements located parallel, (iv) the length dimensions of the shaft elements located serial are independent of each other.

• Journal of Information Processing Systems
• /
• 제19권4호
• /
• pp.407-416
• /
• 2023

In order to effectively relieve the traffic pressure of the city, ensure the smooth flow of freight and promote the development of the logistics industry, the selection of appropriate port logistics location is the basis of giving full play to the port logistics function. In order to better realize the selection of port logistics, this paper adopts the entropy weight method to set up a multi-dimensional evaluation index, and constructs the evaluation model of port logistics location. Then through the actual case, from the environmental dimension and economic competition dimension to make choices and analysis. The results show that port d has the largest logistics competitiveness and the highest relative proximity among the three indicators of hinterland city economic activity, hinterland economic structure, and port operation capacity of different port logistics locations, which has absolute advantages. It is hoped that the research results can provide a reference for the multi-dimensional selection of port logistics site selections.

• 대한기계학회논문집B
• /
• 제28권11호
• /
• pp.1398-1406
• /
• 2004

The nonlinear signals from an impedance meter for the area average void fraction in two-phase flow have been analyzed to construct a phase space trajectory. The pseudo phase space was constructed with the time delay and proper dimensions. The time delay and the embedding dimension were chosen by the average mutual information and by the false nearest neighborhood, respectively. The attractor-density-map of projected states was used to produce the two dimensional probability distribution functions (2D-PDF). Since the developed 2D-PDF showed clear distinction of the flow patterns, the flow regime identification was made with three rules and with the 2D-PDF. Also, the transition criteria of Mishima-Ishii agree well with the present results.

• 수산해양기술연구
• /
• 제31권1호
• /
• pp.74-83
• /
• 1995

모형 그물에 대한 어군행동의 수치모델링에 관한 연구의 일환으로서 어군행동의 모델링을 위하여 어군행동을 나타내는 운동방정식을 구성하는 각종 힘들의 parameter를 추정하기 위한 기초자료를 제공하고자, 모형 그물을 설치하지 않은 상태에서의 유속 변화에 따른 무지개송어의 유영행동을 화성처리하여 각 개체 위치좌표로부터 계산된 유영속도, 유영깊이, 수조의 변과 개체 사이의 거리, 개체상호간의 최근접거리, 어구의 3차원적 구조 등의 유역특성을 조사 분석한 결과는 다음과 같다. 유영궤적으로부터 무지개송어의 유영행동을 살펴보면, 정수상태에서는 수종 중앙부에서 유영하는 빈도가 높았으며, 수조 벽면으로부터 상당히 떨어져서 유회운동을 하는 것으로 나타났다. 정수상태에서의 평균 유영속도는 21.6~23.6cm/sec(2.5~2.9BL cm/sec)로서 개체수가 많을수록 체장당 유영속도가 빠른 것으로 나타났으며, 유속의 변화에 따른 어군의 평균유영속도는 유속이 증가할수록 유영속도도 증가하여 유속이 25cm/sec인 경우에는 유영속도가 30.6 cm/secd(3.8BLcm/sec)에 달하였다. 어군의 평균 유영깊이는 17~38cm로서 주로 중층의 깊이에서 유영하였으며, 유속이 빨라질수록 유영 깊이가 깊어지고 유영 깊이의 변화가 적어졌다. 수조의 벽과 개체 사이의 평균 거리는 17.6~21.4cm였으며, 유속이 빨라질수록 수조의 벽과 개체사이의 거리가 다소 멀어지는 경향을 나타내었다. 개체상호간의 최근거리는 개체수가 많을수록 가까워지며, 유속의 변화에 따른 개체상호간의 최근접거리 평균치는 3.0~5.9cm(0.4~0.7BL cm)로 나타났다. 어군의 3차원적 구조는 군을 형성하는 개체수가 증가함에 따라 군의 형상이 길이, 폭 및 깊이의 모든 방향으로 넓어지며, 유속이 빨라질수록 길이방향과 폭 방향의 크기가 깊이 방향에 비해 상대적으로 커져 각 방향의 평균 상태비는 2.8 : 2.7 : 1이었다.

• 한국물환경학회지
• /
• 제21권5호
• /
• pp.500-504
• /
• 2005

Water samples were collected at 7 sites located along the River Nakdong on 30 occasions. Water qualities, size and fractal dimension ($d_F$) of suspended particles were measured. Laser light scattering method was used to obtain the size and $d_F$ of suspended particles. The average size of particles in this river ranged from $89{\mu}m$ and $169{\mu}m$, which appears to be relatively coarse compared with other rivers worldwide. The average $d_F$ of suspended particles in this study ranged from 1.8 to 1.9. The correlation analysis showed that DO, TN, $NO_3$ and chlorophyll-${\alpha}$ had significant positive relationships with particles size, whereas flow rates and TSS had negative relationships. Interestingly, the factors of which had positive relationships with particles size showed negative relationship with the fractal dimension ($d_F$) of suspended particles. Generally, as the size of particles increased, the fractal dimension of particles decreased which was indicating the shape of the larger particles became more irregular.