• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.2
• /
• pp.57-65
• /
• 1986

The need of forecasting river flows arised whenever a river authority must make controls to protect the life and property from the flood and maintain the adequate flows for water use. This study is on the real time flood forecasting from the gauged and ungauged rainfall input and identification of second-order autoregressive(AR(2)) which is used as system model. A Kalman filter is used to obtain the values of the system parameters needed for the optimal control strategy. This system model was applied to the data at the Naiu gauging station in Young san river basin to check the accuracy and efficiency of prediction. One step ahead prediction is checked by stochastic analysis and the order of autoregressive model is proved to be satisfied, Discussions on interesting features of the model are presented.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.1
• /
• pp.72-79
• /
• 2009

Recently, the internal combustion engines have focused on reducing the $CO_2$ gas in order to cope with severe regulations for fuel economy. Therefore, various new technologies have been developed. Among them, cooling system is spotlighted because it has great effect on fuel economy. In this study, we measured the friction losses of engine parts according to engine speed and oil temperature. We also obtained optimized oil temperature which has the minimum friction losses. Then, we selected optimized oil temperature range and gave informations of friction losses for each engine parts. In addition, we analyzed relationship between coolant temperature and oil temperature by using engine performance test system. From this experiment, we obtained the database for relationship between coolant temperature and oil temperature. Then, we found the optimal temperature about engine oil. We analyzed BSFC and exhaust emissions by controlling the high coolant temperture. If we controlled coolant temperature more higher, BSFC has a little difference but exhaust emissions such as THC and CO have reduced. By using these experimental results, we predicted that IC engine have more low fuel consumption and exhaust emissions by optimized cooling control strategy.

• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2195-2206
• /
• 2021

In order to mitigate the damage caused by accidents in nuclear power plants (NPPs), evacuation strategies are usually managed on the basis of off-site effects such as the diffusion of radioactive materials and evacuee traffic simulations. However, the interactive behavior between evacuees and the accident environment has a significant effect on the consequential gap. Agent-based modeling (ABM) is a method that can control and observe such interactions by establishing agents (i.e., the evacuees) and patches (i.e., the accident environments). In this paper, a radiological emergency evacuation model is constructed to realistically check the effectiveness of an evacuation strategy using NetLogo, an ABM toolbox. Geographic layers such as radiation sources, roads, buildings, and shelters were downloaded from an official geographic information system (GIS) of Korea, and were modified into respective patches. The dispersion model adopted from the puff equation was also modified to fit the patches on the geographic layer. The evacuees were defined as vehicle agents and a traffic model was implemented by combining the shortest path search (determined by an A ^* algorithm) and a traffic flow model incorporated in the Nagel-Schreckenberg cellular automata model. To evaluate the radiological harm to the evacuees due to the spread of radioactive materials, a simple exposure model was established to calculate the overlap fraction between the agents and the dispersion patches. This paper aims to demonstrate that the potential of ABM can handle disaster evacuation strategies more realistically than previous approaches.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.1
• /
• pp.14-25
• /
• 2020

Proximal flow control achieved with a balloon guide catheter (BGC) during endovascular treatment of acute ischemic stroke is reviewed in this article. In clinical practice, BGCs offer a multi-faceted approach for clot retrieval by creating proximal flow arrest, reducing embolic burden, and shortening procedure time. Evaluation of frontline thrombectomy procedures with BGCs revealed advantages of combined use over the conventional guide catheter (CGC), notably in the significant reduction of distal emboli to both the affected and previously unaffected territories. Recently, new measures of early and complete reperfusion at first thrombectomy pass have been identified as independent predictors of improved outcomes, which were consistently demonstrated with use of BGC as a safe and effective option to minimize number of passes during intervention. Prior randomized controlled trials reported the positive correlation between BGC-treated patients and a lower risk of mortality as well as shortened procedure time. While BGC use is more common in stent retriever-mediated mechanical thrombectomy, preliminary data has shown the potential benefit of device application during contact aspiration thrombectomy to achieve successful recanalization. However, the question of which major endovascular strategy reigns superior as a frontline remains to be answered. Along with clinical case assessments, BGC performance during in-vitro simulation was analyzed to further understand mechanisms for optimization of thrombectomy technique.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.8
• /
• pp.1227-1234
• /
• 2020

In this study, yeast cell immobilization was carried out in a packed bed reactor (PBR) to investigate the effects of the volumetric capacity of carriers as well as the different fermentation modes on fuel ethanol production. An optimal volumetric capacity of 10 g/l was found to obtain a high cell concentration. The productivity of immobilized cell fermentation was 16% higher than that of suspended-cell fermentation in batch and it reached a higher value of 4.28 g/l/h in repeated batches. Additionally, using this method, the ethanol yield (95.88%) was found to be higher than that of other tested methods due to low concentrations of residual sugars and free cells. Continuous ethanol production using four bioreactors showed a higher productivity (9.57 g/l/h) and yield (96.96%) with an ethanol concentration of 104.65 g/l obtained from 219.42 g/l of initial total sugar at a dilution rate of 0.092 h^-1. Furthermore, we reversed the substrate-feed flow directions in the in-series bioreactors to keep the cells at their highest activity and to extend the length of continuous fermentation. Our study demonstrates an effective method of ethanol production with a new immobilized approach, and that by switching the flow directions, traditional continuous fermentation can be greatly improved, which could have practical and broad implications in industrial applications.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.2
• /
• pp.24-30
• /
• 2009

In this paper, the FPGA modem platform complying with 3GPP Release 7 eHSPA specifications and its regularized verification flow are proposed. The FFGA platform consists of modem board supporting physical layer requirements, MCU and DSP core embedded control board to drive the modem board, and peripheral boards for RF interfacing and various equipment interfaces. On the other hand, the proposed verification flow has been regularized into three categories according to the correlation degrees of hardware-software inter-operation, such as simple function test, scenario test call processing and system-level performance test. When it comes to real implementations, the emulation verification strategy for low power mobile SoC is also introduced.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.2
• /
• pp.209-217
• /
• 2022

Lane management with a central variable lane(s) (or reversible lane) where the traffic flow is temporarily reversed in one or more lanes during peak periods has been evaluated as an effective strategy to alleviate congestion caused by tidal traffic flows. However, due to traffic safety issues, such a movable barrier system can be considered as an alternative to supplement the existing its operation facilities such as static and/or dynamic signs and special pavement markings. In addition, when combined with a bus exclusive lane strategy, its effectiveness could be greatly increased. The objective of this study is to propose a feasibility analysis procedure for operational strategies of a bus-exclusive lanes using a barrier transfer system (BTS) for urban expressways. To this end, a case study was conducted on two urban expressways on the west side of the Han River in Seoul. As a result, temporary operation during rush hour in the morning was found to be most effective. The results presented in this study are expected to serve as a basis for establishing bus-exclusive lane operation strategies using similar systems in the future.

• Korean Journal of Clinical Laboratory Science
• /
• v.52 no.1
• /
• pp.18-27
• /
• 2020

The correct distinction of carbapenem-resistant Enterobacteriaceae (CRE) and ccarbapenemase producing Enterobacteriaceae (CPE) and the rapid detection of CPE are important for instituting the correct treatment and management of clinical infections. Screening protocols are mainly based on cultures of rectal swab specimens on selective media followed by phenotypic tests to confirm a carbapenem-hydrolyzing activity, the rapid carbapenem inactivation method, lateral flow immunoassay, the matrix-assisted laser desorption ionization-time-of-flight test and molecular methods. The CPE is accurate for detection, and is essential for the clinical treatment and prevention of infections. A variety of phenotypic methods and gene-based methods are available for the rapid detection of carbapenemases, and these are expected to be routinely used in clinical microbiology laboratories. Therefore, to control the spread of carbapenemase, many laboratories around the world will need to use reliable, fast, high efficiency, simple and low cost methods. Optimal effects in patient applications would require rapid testing of CRE to provide reproducible support for antimicrobial management interventions or the treatment by various types of clinicians. For the optimal test method, it is necessary to combine complementary test methods to discriminate between various resistant bacterial species and to discover the genetic diversity of various types of carbapenemase for arriving at the best infection control strategy.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.1
• /
• pp.224-236
• /
• 1997

In order to control the flow of traffic in ATM networks and optimize the usage of network resources, an appropriate control mechanism is necessary to cope with congestion or prevent degradation of network performance caused by congestion. While the conventional UPC algorithm provides only unstable preventive function unrelated with the state of networks and is unable to recover congestion, the proposed adaptive UPC algorithm supervises the situation of ATM networks using the information from OAM cell. Then the monitor of the proposed adaptive UPC algorithm controls leaky rate and buffer threshold value according to QOS. Therefore, the proposed algorithm can cope with congestion as well as prevent and react sensitively to buffer delay. In proportion to the diversity of traffic and the increase of transmission rate in networks, the adaptive UPC-BT algorithm proposed in this paper can be effectively used in ATM networks with wide applications. This paper shows that the proposed algorithm efficiently uses in ATM networks with application. This paper shows that the proposed algorithm efficiently use network resources and provides QOS to users for various kinds of traffics by comparing with conventional UPC algorithms.

• Environmental Analysis Health and Toxicology
• /
• v.25 no.2
• /
• pp.145-151
• /
• 2010

Perfluorinated chemicals (PFCs) is a kinds of persistent organic pollutants, and have the potential toxicity of which is causing great concern. In this study, we employed Oryzias latipes embryos to investigate the developmental toxicity of perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA)s compound using flowthrow system for 14 day. O. latipes embryos were exposed to solvent control, 20, 40 and 80 mg/L of PFOS and 62.5, 130, 260 mg/L of PFOA respectively. After exposure, hatchability, mortality, total length and heart beats were examined. Hatching rates were reduced approximately 27% in the 80 mg/L PFOS-treated group and 17% in the 62.5, 130 mg/L PFOA-treated groups. Heart beats in the PFOS-treated groups were reduced at 7 day but, PFOA-treated groups were increased heart beats. 80 mg/L PFOS treated group showed significant reduction in growth (total length) level to 90% of control. But PFOA did not showed significant effect on growth. In the 14 days $LC_{50}$ of PFOS and PFOA was 22.74 mg/L and 173 mg/L, respectively. The overall results indicated that the early stage of O. latipes might be a reliable model for the testing of developmental toxicity to perfluorinated chemicals.