• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.5
• /
• pp.689-693
• /
• 2015

Recently, many advanced countries are devoted to the development of eco-friendly new-renewable energy to prepare for the depletion of resources. Korea belongs to the absolute lack of energy to import from abroad 97% of energy use. So, development and supply of eco-friendly energy such as small hydro power has been required even more. Our country has a large number of small-sized reservoirs and dams. So, hydro generator has been installed at the small reservoirs and dams with the economy. Since the discharge flow of agricultural reservoir is not constant, the guide vane of wicket gate is used for adjusting the output of the generator.

• Journal of Energy Engineering
• /
• v.17 no.2
• /
• pp.47-53
• /
• 2008

The objective of this paper is to clarify the flow characteristic, velocity distribution, pressure loss, and other such fundamental data for the canister during loading and purging. The amount of gas that is loaded increases as the loading rate is decreased and the time increased, and the purging improves as the purge rate is increased. The hydrocarbons that are purged initially have a high concentration, and a large amount is purged. During loading and purging, the temperature initially increases and decreases drastically due to heat generation and heat loss.

• Journal of the Korean Society of Combustion
• /
• v.1 no.2
• /
• pp.41-49
• /
• 1996

A numerical study is conducted to investigate the periodically unstable shock induced combustion around blunt bodies in stoichiometric hydrogen-air mixtures. Euler equations are spatially discretized by upwind-biased third order scheme and temporally integrated by Runge-Kutta method. Chemistry model used in this study involves 8 elementary kinetics steps and 7 species. At a constant Mach number, the effects of projectile size, inflow pressure and inflow temperature are examined with Lehr#s experimental condition as a reference. In addition to oscillation frequency, characteristic distances and time averaged values are found from the result to find an relation with dimensionless parameters. As a result, it is found that the effects of inflow pressure and body size are very similar and $Damk{\ddot{o}}hler$ number plays an important role in determining the instability characteristics.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.6
• /
• pp.730-737
• /
• 2018

This paper aims to design of a double stator axial field 12/10 SRM. Conventional and single stator axial field SRMs were reviewed to apply for automotive cooling fan. The axial field SRM has the advantage of shorter flux path, higher torque per volume and lower iron loss. However, there is axial eccentricity in single stator axial field SRM due to one side excitation. Therefore, a double stator type is designed in this paper to reduce the axial eccentricity. And the trapezoidal pole shape of the stator increases the flow of magnetic flux from stator to rotor and the torque region. The torque and efficiency are compared and tested with experiments.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.53 no.3
• /
• pp.116-121
• /
• 2004

This paper proposes a novel UPFC based on 3-level Half-bridge modules, isolated through single-phase multi-winding transformers. The dynamic performance of proposed system was analyzed by simulation with EMTDC, assuming that the UPFC is connected with the 138-kV transmission line of one-machine-infinite-bus power system. The proposed system can be directly connected to the transmission line without series injection transformers. It has flexibility in expanding the operation voltage by increasing the number of 3-level Half-bridge modules.

• Korean journal of food and cookery science
• /
• v.24 no.2
• /
• pp.266-271
• /
• 2008

In this study, Jeolpyon(imprinted with flow patterns) was prepared with different amount of added Astragalus membranaceu extracts(0%, 3%, 6%, 9% and l2%)and then the quality and sensory characteristic effects were examined. All togather the chemical composition of the samples was as follows: $53.l2{\pm}0.04%$ of moisture, $l4.43{\pm}0.05$ crude protein, $7.6l{\pm}0.11%$ crude fat, and $21.35{\pm}0.09%$ crude ash. Hardness and cohesiveness significantly increased(p <0.001), and springiness, chewiness and adhesiveness decreased, with increasing amounts of Astragalus membranaceus extract. In the chromaticity analysis, the L-value(brightness)significantly decreased with increasing Astragalus membranaceus extract content, and the b-value(yellowness) increased in direct proportion to the extract content. Finally, in the sensory evaluation, the Jeolpyon containing 9.0% extract received the highest overall preference scores.

• Journal of the Korean Society for Heat Treatment
• /
• v.33 no.6
• /
• pp.284-289
• /
• 2020

Since the dissimilar bonded interface usually consists of intermetallic compounds (IMCs) layer and cracks, their mechanical and electrical properties can be influenced by microstructure at interface between two different metals. In this study, the friction welded Cu-Al busbar, which is widely used to connect a secondary battery and their component, is selected to analyze the influence of interfacial characteristic on their tensile strength and electric conductivity. Then, the electrical characteristics of Cu busbar and Cu-Al busbar were investigated by thermal flow analysis and temperature rise test. In addition, the relationship between the maximum saturation temperature and the electrical conductivity were discussed in terms of interfacial characteristics of the friction welded Cu-Al busbar.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.339-339
• /
• 2016

하천의 수질 개선을 위한 방법 중에서도 하천 구조체를 활용하는 방법은 기존의 하천 구조체가 가지는 고유의 기능을 훼손하지 않으면서 하천 수질을 개선할 수 있는 방법으로 점차로 그 영역이 확대되고 있는 추세이다. 이러한 방법의 대부분은 하천 구조체를 통과하는 흐름에 공기유입 기능을 강화하여 물의 용존산소량을 증가시킴으로써 수질의 개선을 유도한다. 따라서 하천 구조체를 통과하는 물에 공기유입을 향상시킬 수 있는 구조체 형상의 개발은 하천의 수질개선에 영향을 줄 수 있는 중요한 연구 주제이다. 본 연구에서는 하천 구조체 중에서도 댐의 여수로와 보에 사용되어지는 계단형 구조물의 흐름에 대해 공기연행 해석이 가능한 난류모형을 적용하여 수치모의를 이용한 검토를 수행하였다. 그 결과 연구에 사용된 모형이 계단형 흐름 구조체의 수리적 특성과 공기유입의 변화를 각각의 형태에 따라 적절히 모의하는 것을 확인 할 수 있었다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.122-129
• /
• 2008

Rocket Based Combined-Cycle(RBCC) engines are currently being explored as advanced propulsion for space transportation. JAXA has been conducting RBCC engine research by using various experimental facilities. In order to clarify the experimental results and contribute to the improvement of designing, the analysis of the RBCC engine in an ejector-jet mode was carried out using the CFD code developed in-house for unstructured grids. CFD replicated the characteristic flow structures. The numerical simulation of the pumping performance of the ejector driven by different rocket gases(He, $N_2,\;A_r$) and physical conditions were performed, and their effects on the performance were studied.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.2
• /
• pp.65-71
• /
• 2010

The hydrologic performance characteristics of small hydro power(SHP) sites located in four major river systems have been studied. The model, which can predict flow duration characteristic of stream, was developed to analyze the variation of inflow caused from rainfall condition. And another model to predict hydrologic performance for SHP plants is established. Monthly inflow data measured at Andong dam for 32 years were analyzed. The predicted results from the developed models in this study showed that the data were in good agreement with measured results of long term inflow at Andong dam. The results from hydrologic performance analysis for SHP sites located on five major river systems based on the models developed in this study show that the specific design flowrate and specific output of SHP site have large difference between the river systems.