• 한국환경과학회지
• /
• 제13권3호
• /
• pp.251-262
• /
• 2004

To identify the characteristics of wastewater flow generated in treatment basins of Seogwipo-city, we selected 3 stations representing the basin and performed 7 times of field survey including 5 times in dry periods and 2 times in wet periods from Feb. 25 to May 27, 2002 for the selected stations. From the analysis of flow data measured for more than 60 days in the interval of 5 minutes and concentration data obtained from laboratory analysis, we can draw several conclusions. First, in the analysis of diurnal variation of wastewater flow for land-use types, we could find the following results: in the residential area, it is observed that wastewater flow rates rise early in the morning for the office-going hour and fall gradually and rise again after the office-leaving hour, showing typical residential wastewater flow pattern, while for the residential and commercial area flow rates rise early in the morning at the office-going hour and move up and down repeatedly within wide range and last till the office-leaving hour, which can be resulted from wastewater that is generated by tourists activated after early in the afternoon, while for the touristy area flow rates rise early in the morning and fall gradually and rise again within wide range. Second, in the analysis of temporal variation of wastewater flow for monthly, it can be observed that in the residential area, in the residential and commercial areas the flow rate of May is higher than that of Feb., March, while for the touristy area flow rate is without monthly because it reflects the movement of population, Third, in wet periods concentration of water-quality item such as SS, BOD, and COD_{cr}$ is high in the beginning of rainfall by first flush, and falls down gradually to reach the steady state, which is the level of wastewater in dry periods after the cease of storm water due to diluting effect resulting from additional runoff water through storm sewers.

• 한국유체기계학회 논문집
• /
• 제10권5호
• /
• pp.41-45
• /
• 2007

The effects of channel area on the performance of regenerative type fuel pump were numerically studied by commercial CFD code (ANSYS CFX-10). To examine the effects of channel area, the shapes of the side channel and blade were simplified. The channel area affected the flow characteristics of the internal recirculation flow between the side channel and the blade groove and also made a difference in the overall performance. These loss mechanism with circulation flow were adopted as a loss coefficient in the performance prediction program. The loss coefficient was newly derived from the results of calculations with different channel area, and compared with the experimental results in the reference paper and used to modify the performance prediction program. The circulation flow characteristics with different channel area, which is related with loss mechanism, were also discussed with the results of 3-dimensional flow calculations.

• 대한토목학회논문집
• /
• 제39권2호
• /
• pp.307-316
• /
• 2019

하도 내 식생발달은 흐름저항을 크게하여 홍수 시 하천 수위를 상승시키고 수위-유량관계의 변화에도 영향을 미치고 있다. 홍수 시 수위가 첨두에 도달하고 하강하여 하도 내 드러난 식생은 대부분 도복(倒伏, prone) 상태에 있다. 이렇게 식생이 도복상태로 되어있는 식생층 구간은 식생된 개수로 흐름의 유속분포를 고려하였을 때 유속이 0인 지점의 높이로 고려된다(Stephan and Guthnecht, 2002). 그러나 부자 측정에 의한 유량산정에 있어서 식생층 구간의 높이를 고려하지 않고 하상높이를 유하면적으로 적용하면 유량이 과대 산정되는 경향이 발생한다. 본 연구에서는 식생된 하천에서 정도 높은 유량을 산정하기 위해 영강의 점촌, 내성천의 향석 지점에서 홍수 후 식생층 높이를 측량하고 통수단면적에서 식생층 투영면적을 제외하여 유량을 산정하였다. 그 결과, 유량의 규모에 따라 차이는 있지만 최소 4.34 %에서 최대 10.82 %의 유량편차를 보였다. 따라서 홍수 시 통수단면적을 적용하여 유량을 산정하는 유속-단면적 방법에 있어서 식생하천에서 식생층 높이의 투영면적을 고려하여 유량을 산정한다면 좀더 적합한 유량산정이 이루어질 것으로 판단된다.

• 한국수자원학회논문집
• /
• 제47권5호
• /
• pp.459-468
• /
• 2014

수제는 일반적으로 하천에서의 흐름 방향과 유속을 제어하여 하안 또는 제방을 유수에 의한 침식작용으로부터 보호하기 위한 목적으로 설치될 뿐만 아니라 운하의 운영을 위한 충분한 수심 확보 목적으로도 이용된다. 특히 하천복원 및 자연하천 정비에 대한 관심이 커지면서 수제는 국부적인 흐름제어와 수중서식처 조성을 위한 주요 수공구조물로 제시되고 있다. 수제는 단일구조물로 설치되는 경우보다는 군수제의 형태로 설치되어 지는데 군수제의 경우 설치간격에 따라 수제역내 흐름이 다양하게 변화하기 때문에 수제간격은 군수제 설계에 있어서 가장 중요한 설계인자라 할 수 있다. 본 연구에서는 설치간격에 따라 다양하게 변화되는 수제주변 및 수제역내 흐름에 대한 검토를 통해 상향수제를 대상으로 수제설치에 따른 적절한 간격을 제시하고자 하였다. 이를 위해 주흐름영역과 재순환영역으로 구분하여 수제주변에서 발생하는 흐름을 대상으로 검토하였다. 주흐름영역은 통수능 저감으로 인해 증가된 유속이 하상안정성에 영향을 미치는 인자로 설치간격에 따른 최대유속의 변화에 대하여 검토하였다. 수제역내 재순환흐름은 수제역내 세굴 및 퇴적에 영향을 미치는 요소로서 수제역내 흐름 및 제방의 안정성에 문제를 야기시킬 수 있다. 재순환영역은 회전류의 규모와 제방부 안정성에 영향을 미치는 제방주변에서의 흐름에 대하여 분석하였으며, 수제역내 발생하는 회전류의 중심점 위치변화에 대한 비교검토를 수행하였다. 결과를 종합적으로 검토한 결과 상향수제설치에 따른 유속저감, 하상안정성확보, 수제역내역류로 인한 제방안정성 확보 등을 고려하였을 때 적절한 설치간격은 최소 4배에서 최대 6배 이내로 설치할 것을 제안하고자 한다.

• 설비공학논문집
• /
• 제13권5호
• /
• pp.356-367
• /
• 2001

A numerical analysis on branch type sparger in drain tank for depressurization is performed to investigate the flow characteristics due to the change of design factor. As the result of this study, sparger\\`s flow resistance coefficient(K) is 3.53 at the present design condition when engineering margin for surface roughness is considered as 20%, and flow ratio into branch pipe ($Q_s/Q_i$) is 0.41. The correlation for calculating flow resistance coefficients as design factor is presented. Flow resistance coefficient is increased as section area ratio of branch pipe for main pipe and outlet nozzle diameter of main pipe decreasing, but the effects of branch angle and inlet flow rate of main pipe are small. As the change rate of ($Q_s/Q_i$)becomes larger, the change rate of flow resistance coefficient increases. The rate of pressure loss has the largest change as section area ratio changing. The condition of maximum flow resistance in sparger is when the outlet nozzle diameter ratio of main pipe ($D_e/D_i$) is 0.167, the section area ratio ($A_s/A_i$) is 0.1 and the branch angle ($\alpha$) is 55^{\circ}$.

• 토지주택연구
• /
• 제8권1호
• /
• pp.13-22
• /
• 2017

In this study, triggering mechanism of ground sinking was analyzed through groundwater flow analysis on the basis of a case of the ground sinking occurred in Yongsan in 2015. The results of geotechnical investigation performed before and after the ground sinking were analyzed for the accurate understanding of geological features in the study area. The numerical groundwater flow analysis was performed to evaluate the influence of the flow behavior from the surrounding area toward the excavated site using software of Visual MODFLOW. As a result, it was found from the geotechnical analysis that the strata of sedimentary layer along the sunken area in the vertical direction was mixed significantly after the ground sinking compared with the status of the soil condition before the ground sinking. Piping was occurred at the toe of cut-off wall in the sandy gravel layer, and this phenomenon was predicted by the numerical flow analysis. Sequential ground displacement scenario of the ground sinking was derived from the geotechnical in situ test and numerical flow analysis performed in this study.

• 한국자동차공학회논문집
• /
• 제1권3호
• /
• pp.34-45
• /
• 1993

This study aims to analyze the mixing characteristics of hydrogen considered as a new fuel for internal combustion engines. As the physical property of helium gas is similar to that of hydrogen, helium gas was used in this study. To analyze the steady and unsteady behavior of jet, helium gas was injected into the stationary atmosphere at the normal temperature and pressure. Concentration of helium gas in the center of jet flow is in inverse proportion with axial distance from the nozzle tip. This agrees with the free jet theory of Schlichting. The relative equation for dimensionless concentration to radial/axial distance the axial distance of potential core region, the cone angle a of the jet flow and the relative equation for arriving distance of the front of jet flow to the lapse of time are obtained. But free jet theory of Schlichting in the dimensionless concentration is not in agreement with the present experimental results of the distance of the radial direction. It needs more study. When the arrival frequency of jet flow is used as a parameter, the transition area changing from unsteady flow area into steady flow area becomes gradually wider downstream, but its ratio for the whole unsteady flow area gradually decreases.

• 한국수자원학회논문집
• /
• 제43권1호
• /
• pp.41-49
• /
• 2010

본 연구의 계단형 보는 자연형 횡단 구조물의 한 형태로 제안되고 있다. 계단형 보 하류에서의 흐름은 기존 보(Round Crest Weir)에서 발생하는 도수와 달리 WTF(Wave Type Flow)라는 독특한 흐름이 발생한다. WTF는 계단형 보 하류에서 단차로 인해 발생되는 재순환영역(recirculation area)이 일정조건에서 발달하여 수면을 상승시키는 현상이다. WTF 조건에서의 파고는 하류수위(tailwater level) 보다 높아지고 WTF 구간에서의 최대유속발생이 수면에 가까운 곳에서 발생한다. 이와 같은 결과는 WTF 현상이 설계 시 접합부에 영향을 줄 수 있는 중요 인자임을 나타내는 것이다. 본 연구는 수리실험을 통해 WTF이 발생되는 수리조건과 WTF의 규모를 파악하였고 계단형 하류흐름조건에 따른 유속분포를 분석하였다. 본 연구의 결과는 계단형 보 설계 시 고려되지 못한 부분으로서 차후에 계단형 구조물 또는 계단식 변형 구조물 설계 시 주요 자료로 활용 될 것이다.

• 한국정밀공학회지
• /
• 제30권12호
• /
• pp.1295-1301
• /
• 2013

The cause of flow mark defect is known as non-uniform temperature of mold surface when the flow front meets the cold cavity. The exact definition and classification of Flow mark is not clear because the mechanism of flow mark is not figured out till now. Any injection molding analysis software can not predict the flow mark phenomena. To solve weldline and flow mark defects, the gate thickness is reduced to increase the melt front velocity and the melt front velocity of the flow mark area is increased from 82.3mm/s to 104.7mm/s. In addition, the bulk temperature of the flow mark area is increased from $178.3^{\circ}C$to $215.2^{\circ}C$ by adding a cold slug well. The flow mark phenomena can be greatly reduced by increasing the flow front velocity and elevating the bulk temperature.

• 유통과학연구
• /
• 제16권9호
• /
• pp.65-77
• /
• 2018

Purpose - A trading area is very closely related to consumer life. A trading area is a cultural and social space that consumes culture and promotes human relationships as well as an economic space where consumers live their daily lives. In this context, a trading area research should be conducted objectively and empirically because it deals with the activities of consumer's life. The purpose of this study is to identify the intrinsic psychological motivation(push motivation) caused when consumers visit a trading area and to demonstrate how the push motivation for a trading area influence on consumer's flow, satisfaction, revisit intention. Research design, data, and methodology - In order to develop research hypotheses for this study, the development procedures for push motivation scale are as follows; (1) generating initial pool of items based on previous studies, (2) expert judgement to evaluate content and face validity, and (3) assessing convergent and discriminant validity using confirmatory factor analysis. In order to achieve these purposes, online surveys were conducted on frequent or familiar visitors to the trading areas around the Gangnam, Kunkuk University and Hongik University Station. Among the 1,343 questionnaires collected, 1,157 cases were analyzed by using SPSS 22.0 and SmartPLS 3.0 statistical package program, except for 186 responses in which responses were judged to be unfaithful. Results - The push motivation was classified into five sub-dimensions of excitement/stimulus, rest/relaxation, exit/refreshing, knowledge/learning and human relationship promotion as multidimensional and complex factors composed of individual and social-related dimensions. The excitement/stimulus and human relationship promotion of push motivation have positive effects on satisfaction. However, all dimensions of the push motivation have positive effects on flow. And flow has a positive effect on satisfaction and revisit intention. Meanwhile, the mediation test using boostrapping shows that flow plays a full mediating role in the relationship between rest/relaxation, exit/refreshing, knowledge/learning and satisfaction, but a partial mediating rol e between excitement/stimulus, human relationship promotion and satisfaction. Finally, satisfaction plays a partial mediating role between flow and revisit intention. Conclusions - This study shows that the push motivation is multidimensional and compositive depending on the situation of a consumer. In addition, it is found that the human relationship promotion(a social-related motivation) has a much more important effect on flow and satisfaction than other push motivations of individual dimensions. It also shows that satisfaction increases when consumers are being flowed at their visit and degree of revisit intention also grows as satisfaction increases. As implications of this study, a marketer should try to understand consumer's visit motivation at first and then develop factors that increase their flow, satisfaction, revisit intention. It also requires a marketer to approach subjects on a trading area more objectively and empirically based on the psychology and behavior of consumers, in order to establish a proper and efficient strategy on development of a trading area.