• Tunnel and Underground Space
• /
• v.22 no.5
• /
• pp.346-353
• /
• 2012

Multi-specimen uniaxial compression test has been carried out in order to find the method to determine the five independent elastic constants from a single standard specimen of a transversely isotropic rock. Total 35 specimens of 7 different angles from a large block of rhyolite presenting the flow structure obviously are used in tests. This second report is to focus on the statistical evaluation of measured strains and analyzed elastic constants. And the determination of their true or near-true values is discussed. As the result of RSD analysis, it turns out that the reliability of measured strains is sufficiently obtained and Saint-Venant approximation is well applicable except 15 degree angled specimen in tests. RSD is decreasing on the increase of the angle of anisotropy. This tendency may be caused not only by the decreasing of the deviation of measured strains, but also by the better applicability of Saint-Venant approximation on the increase of angle. It can be concluded that the analyzed values are considered the near-true ones of five independent constants on the high reliability. But the variation of the apparent Young's modulus expected by these values is not proved to match the measured tendency. It is inferred that the factor to decrease the apparent Young's modulus and/or to increase the shear strain, is present in the test or in the nature of the anisotropy in consideration of this inconsistency.

• Microbiology and Biotechnology Letters
• /
• v.41 no.1
• /
• pp.33-43
• /
• 2013

A bacterium producing a fibrinolytic enzyme was isolated from Cheonggukjang. The bacterium was identified as a strain of Bacillus amyloliquefaciens by 16S rDNA analysis and designated as B. amyloliquefaciens HC188. The optimum culture medium appeared to be one containing 0.5% (w/v) maltose and 0.5% (w/v) soytone. Bacterial growth in the optimal medium at $37^{\circ}C$ reached the stationary phase after 27 h of incubation and the fibrinolytic enzyme showed optimum activity at 24 h. The enzyme was purified by 20-80% ammonium sulfate precipitation, CM Sepharose fast flow ion exchange chromatography, and Sephacryl S-200HR column chromatography. Its specific activity was 38359.3 units/mg protein and the yield was 5.5% of the total activity of the crude extracts. The molecular weight was 24.7 kDa and the amino acids of the N-terminal sequence were AQSVPYGVSQIKAPA. The fibrinolytic enzyme activity had an optimum temperature of $40^{\circ}C$ and an optimum pH of 8.0, and the enzyme was stable in the ranges $20-40^{\circ}C$ and pH 6.0-8.0. Enzyme activity was increased by $Ca^{2+}$ and $Co^{2+}$ but inhibited by $Cu^{2+}$, EDTA, and PMSF. It is suggested that the purified enzyme is a metallo-serine protease.

• Applied Microscopy
• /
• v.40 no.4
• /
• pp.211-218
• /
• 2010

The mammalian ovary is innervated by sympathetic and sensory neurons which contribute to regulating several aspects of ovarian function, including blood flow, steroidogenesis and follicular development. The existence of a neural connection between central neurons and the ovary has been rarely reported, but the mechanism underlying integration of ovarian activity to broader neuroendocrine responses has not been reported. We have now used a viral transneuronal tracing technique combined with a conventional retrograde labeling procedure of CT-HRP to demonstrate that oxytocin-producing neurons of the hypothalamus are synaptically connected to the ovary. Since ovarian activity is suppressed but the activity of oxytocin neurons is increased during breast feeding. Our finding that the oxytocinergic neural connection is likely to provide a direct transsynaptic mechanism by which the central nervous system maintains the state of infertility that accompanies lactation in mammals.

• Parasites, Hosts and Diseases
• /
• v.31 no.1
• /
• pp.31-36
• /
• 1993

This study was performed to evaluate differences of T cell subsets according to the injection period of recombinant mouse $interferon-{\gamma}{\;}(IFN-{\gamma}$ in acute Toxoplasma gondii infection. Each mouse was infected intraperitoneally with 100 cysts of Beverley strain T. gondii, and injuten with $5{\;}{\times}{\;}10^4$ units of $IFN-{\gamma}$ every other day two tares. The percentage of Thy-1, 2 cells and L3T4/Ly-2 cell ratio were significantly increased in the mice that received two doses of $IFN-{\gamma}$ on days 2 and 0 before infection, or days 0 and 2 after infection. The percentage of Ly-2 cells decreased in the $IFN-{\gamma}$ injected groups at th\ulcorner 3rd and 4th week after infection. The results suggest that administration of $IFN-{\gamma}$ to T gonnii-infected mice improves the changed population of T cell subsets to a normal state, especially when $IFN-{\gamma}$ was infected just after the infection.

• Economic and Environmental Geology
• /
• v.15 no.1
• /
• pp.41-47
• /
• 1982

Typical stratigraphic sequences of Paleozoic form the Baegunsan Syncline (equal to Hambaeg Syncline) and Taebaegsan Group is the basement in the southern part of Kangweon Province. Deformation pattern depends on their stratigraphic site and their internal properties. In the biotite schists and meta-sandstones of Pre-Cambrian sequences, flow folds and ptygmatic folds are developed, and high strain deformation is pervasive. Deformational patterns of Cambro-Ordovician are variable because of their various formations. Fracturing is pervasive in the Jangsan Quartzite and Daegi and Maggol Limestone. Welldeveloped slaty cleavage and angular folds of kink and chevron types are the prevailing structures of pelitic rocks. The most characteristic feature of limestone alternated with argillite is the "Compositional cleavage (Author's proposal)" known as the "Worm-eatern" structures. It was known that this structures have a sedimentary origin. But their preferred orienation of long axis of erosional lime holes, originated from tectonic deformation of folding. And this structures have the same character as the axial plane cleavages. Fracturing and long wave concentric folds are dominant characters of the Upper Paleozic sequences. In this area, two folds are superimposed. Field studying and analysis of structures show that the cross-folds of NS-direction are pervasive and were deformed by the EW-directional Baegunsan Syncline. The cross-folding is the major and penetrative deformation and prior to Baegunsan Syncline.

• Journal of Life Science
• /
• v.30 no.11
• /
• pp.1007-1011
• /
• 2020

This study was conducted to analyze the genetic diversity and relationships that discriminate between Korean native black goat populations (Dangjin, Jangsu, Tongyoung, and Gyeongsang National University strains) and crossbred goats. Monomorphic single nucleotide polymorphisms (SNPs) in each strain were collected, and 133 common SNPs were selected for analysis. These 133 monomorphic SNPs showed differences in the genetic structure of the Korean native black goat and crossbred goats, and results from the principal component analysis (PCA) showed that the two can be clearly separated. Furthermore, analysis of the validation population comprising 70 individuals (Korean native black goats, n = 24; crossbred goats, n = 46) with the reference population showed that Korean native black goat strains and the reference population have the same genetic structure, and the crossbred goats shared only part of the genetic structure with the reference population. The result of the PCA analysis showed that the Korean native black goat strains form one population, whereas the foreign strains form another population which is more widely dispersed than the Korean native black goat strains. Thus, the results from this study can be used as baseline data for the conservation of genetic resources of Korean native black goat communities through utilization of monomorphic SNPs and for the introduction of exotic species for further improvement in genetic diversity. This study can also help reduce unnecessary inbreeding and gene flow between native strains.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.3
• /
• pp.1-11
• /
• 2011

The typical truss-lattice material successively packed by repeated cubic symmetric unit cells consists of sub-elements (SE) proposed in this study. The representative continuum model for this truss-lattice material such as the effective strain and stress relationship can be formulated by the homogenization procedure based on the notation of averaged mechanical properties. The volume fractions of micro-scale struts have a significant influence on the effective strength as well as the relative density in the lattice plate with replicable unit cell structures. Most of the strength contribution in the lattice material is induced by axial stiffness under uniform stretching or compression responses. Therefore, continuum based constitutive models composed of homogenized member stiffness include these mechanical characteristics with respect to strength, internal stress state, material density based on the volume fraction and even failure modes. It can be also recognized that the stress state of micro-scale struts is directly associated with the continuum constitutive model. The plastic flow at the micro-scale stress can extend the envelope of the analytical stress function on the surface of macro-scale stress derived from homogenized constitutive equations. The main focus of this study is to investigate the basic topology of unit cell structures with the cubic symmetric system and to formulate the plastic models to predict pressure dependent macro-scale stress surface functions.

• Microbiology and Biotechnology Letters
• /
• v.42 no.4
• /
• pp.393-401
• /
• 2014

A bacterium producing antimicrobial substance was isolated from cheonggukjang. The bacterium was identified as a strain of Bacillus subtilis by 16S rDNA sequencing and designated as Bacillus subtilis HH28. The antimicrobial substance produced from Bacillus subtilis HH28 was purified by 0-80% ammonium sulfate precipitation, DEAE-sepharose FF column chromatography, and Sephacryl S-200 HR gel chromatography. The molecular weight of the purified antimicrobial substance was estimated to be approximately 3,500 Da using Tricine sodium dodecyl sulfate-polyacrylamide gel electrophoresis and direct detection analysis. Antimicrobial substance from B. subtilis HH28 not only inhibited B. cereus, but also Listeria monocytogenes and Vibrio parahaemolyticus. The purified antimicrobial substance was stable at $40-80^{\circ}C$, and between pH 2 and 8. Antimicrobial activity of the purified substance was completely destroyed by treatment of protease, proteinase K, and pronase E, indicating that it is proteinaceous.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.1
• /
• pp.37-44
• /
• 2019

A bond-based peridynamic model has been reported dynamic fracture characteristic of brittle materials through a simple constitutive model. In the model, each bond is assumed to be a simple spring operating independently. As a result, this simple bond interaction modeling restricts the material behavior having a fixed Poisson's ratio of 1/4 and not being capable of expressing shear deformation. We consider a state-based peridynamics as a generalized peridynamic model. Constitutive models in the state-based peridynamics are corresponding to those in continuum theory. In state-based peridynamics, thus, the response of a material particle depends collectively on deformation of all bonds connected to other particles. So, a state-based peridynamic theory can represent the volume and shear changes of the material. In this paper, the perfect plasticity is considered to express plastic deformation of material by the state-based peridynamic constitutive model with perfect plastic flow rule. The elastic-plastic behavior of the material is verified through the stress-strain curves of the flat plate example. Furthermore, we simulate the high-speed impact on 3D granite model with a nonlocal contact modeling. It is observed that the damage patterns obtained by peridynamics are similar to experimental observations.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.373-385
• /
• 2022

The drum cutter, which is used in the form of an attachment of a excavator, is very useful in that it can be used in connection with a excavator that can perform various tasks in the field. This study estimated the load and torque acting on the drum cutter attachment by measuring the hydraulic pressure and strain that appear during excavation on the exposed rock slope using the drum cutter installed in the excavator. Working conditions such as the operation angle between the boom and arm of the excavator were divided into eight working modes. And as a result of analyzing the variations in hydraulic pressure and action force according to the working mode, it was confirmed that the hydraulic pressure and flow rate can be driven without any problems within the range considered in the manufacturing specifications of the drum cutter. The average load and torque acting on the drum cutter were within the range of the manufacturing specifications, but the maximum load was up to four times the specification. Because sumping was not properly performed due to the high ground strength and the ground included discontinuous surfaces in some locations, no trend of load and torque was found depending on the angle between the boom and arm of the excavator. However, it is believed that this result can be used to determine the range of loads and torques that appear on the drum cutter when excavating a high-intensity rock.