• 한국수소및신에너지학회논문집
• /
• 제30권3호
• /
• pp.201-208
• /
• 2019

Recently, a fuel reforming plant for supplying high purity hydrogen is being applied to submarines. Since steam reforming is an endothermic reaction, it is necessary to continuously supply heat to the reactor. A fuel reforming plant for a submarine needs a multi-stage burner (MSB) to acquire heat and convert the combustion gas to $CO_2+H_2O$. The MSB has problems that the combustion imbalance occurs during start-up due to the temperature restriction of the combustion gas. This problems can be solved by burning $H_2O$ together with fuel and $O_2$. In this study, the simulation results of MSB were analyzed to determine the optimum flow rate of $H_2O$ supplied to the 6-stage burner. When the flow rate of $H_2O$ was low, combustion was concentrated on the burner#6 in comparison with the burner#1-#5. This combustion concentration improved as the supply amount of $H_2O$ increased. As a results, it was necessary to supply at least 4.9 kmol/h of $H_2O$ (per 1 kmol/h of fuel) to burner#1 in order to maintain the combustion gas temperature of each stage at $750^{\circ}C$ and to convert the final stage burner gas composition to $CO_2+H_2O$.

• Tribology and Lubricants
• /
• 제39권1호
• /
• pp.28-34
• /
• 2023

Because of their cleanliness, low friction, and high stiffness, aerostatic bearings are used in numerous applications. Aerostic bearings that use porous materials as means of flow restriction have higher stiffness than other types of bearings and have been successfully applied as guide bearings, which have high motion accuracy requirements. However, the performances of porous bearings exhibit strong nonlinearity and can vary considerably depending on design parameters. Therefore, accurate prediction of the performance characteristics of porous bearings is necessary or their successful application. This study presents a porous bearing design and performance analysis for a spindle used in wafer polishing. The Reynolds and Darcy flow equations are solved to calculate the pressures in the lubrication film and porous busing, respectively. To verify the validity of the proposed analytical model, the calculated pressure distribution in the designed bearing is compared with that derived from previous research. Additional parametric studies are performed to determine the optimal design parameters. Analytical results show that optimal design parameters that obtain the maximum stiffness can be derived. In addition, the results show that cross-coupled stiffness increases with rotating speed. Thus, issues related to stability should be investigated at the design stage.

• 한국컴퓨터정보학회논문지
• /
• 제14권2호
• /
• pp.221-229
• /
• 2009

인터넷과 정보통신 기술이 발전함에 따라 영화 유통의 창구도 다양화 되고 있으며, 인터넷 VOD 극장은 저렴한 가격과 인터넷이라는 시간과 공간의 제약성이 없는 특징을 통해 새로운 영화 창구로서 자리 매김 하고 있다. 본 연구에서는 인터넷 VOD 극장을 이용하는 데 있어서 기존 연구에서 나타난 기술수용이론의 지각된 유용성과 몰입이론의 변수 그리고 인터넷 VOD 극장에서 제공하는 영화에 대해 소비자가 느끼는 흘드백 기간에 대한 민감도와 인터넷 VOD 극장에서 제공되는 영화 장르 선택의 다양성이 소비자의 이용 의도에 미치는 영향에 대해 살펴보았다. 본 연구의 의의는 기존 오프라인 영화관 및 다른 영화매체와의 경쟁 속에서 새로운 유통 창구로 자리매김하고 있는 인터넷 VOD 극장의 매체적인 특성을 찾고, 인터넷 VOD 극장 이용자의 이용 의도에 영향을 미치는 요인을 분석함으로써 향후 인터넷 VOD 극장 수익 발전 방향을 모색했다는 점에서 실용적인 의미가 있을 것이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2524-2527
• /
• 2007

Solid propellant gas generators (SPGG) play a role as a turbopump starter in liquid propellant propulsion systems by supplying pressurized gas to power turbines for engine start. For such a purpose, the propellants should burn with a relative low flame temperature and the combustion gas should not contain corrosive constituents such as chlorine compounds. In accordance with these requirements, stabilized AN-based propellants have been usually used as the most appropriate oxidizer for propellant compositions. However, the burning area of the propellant intends to increase to satisfy the required mass flux because of its low burning rate. Consequently the burning area incensement brings on the SPGG size augmentation. A flow restriction such as filters is applied to decrease the SPGG size by rising up the combustion pressure resulting in increasing the burning rate. The feasibility of the size reduction of SPGG by the employment of filters have been studied. The preliminary results of this study show that the considerable reduction of SPGG size would be achievable just by installing a filter with relatively high pressure loss coefficient.

• 한국지반환경공학회 논문집
• /
• 제5권4호
• /
• pp.65-72
• /
• 2004

건설 골재 수급 문제 및 환경에 대한 관심이 높아지면서 국내에서 동슬래그와 같은 각종 산업폐기물의 재활용과 그에 따른 기술개발에 대한 연구가 활발히 진행되고 있다. 이에 본 연구는 동슬래그의 재료특성, 입도분포와 환경적 안정성의 검토를 통하여 동슬래그의 배수재로 적용성을 검토하였다. 실내시험결과를 통하여 일반적으로 쓰여지는 모래보다 우수한 연직배수효과가 있음을 알 수 있었다. 특히 분사현상에 대한 안정성 및 입자유실에 대한 내적안정성을 검토한 결과, 일반적인 사질토에 비해 한계동수경사가 크게 나타나고 내적안정성이 우수하게 평가되었다. 따라서 동슬래그는 지반조건에 따라 배수기능을 충분히 발휘할 수 있으며 내적으로도 안정한 배수재로서 사용이 가능한 것으로 판단된다.

• International Journal of Fluid Machinery and Systems
• /
• 제6권3호
• /
• pp.137-143
• /
• 2013

To improve annular jet pump (AJP) performance, new ways named constant rate of velocity/pressure change method (CRVC/CRPC) were adopted to design its diffuser. The design formulas were derived according to the assumption of linear velocity/pressure variation in the diffuser. Based on the two-dimensional numerical simulations, the effect of the diffuser profile and the included angle on the pump performance and the internal flow details has been analyzed. The predicted results of the RNG k-epsilon turbulence model show a better agreement with the experiment data than that of the standard and the realizable k-epsilon turbulence models. The AJP with the CRPC diffuser produces a linear pressure increase in the CRPC diffuser as expected. The AJP with CRPC/CRVC diffuser has better performance when the diffuser included angle is greater or the diffuser length is shorter. Therefore, the AJP with CRPC/CRVC diffuser is suitable for applications requiring space limitation and weight restriction.

• Journal of Microbiology and Biotechnology
• /
• 제19권10호
• /
• pp.1230-1237
• /
• 2009

The selective plugging strategy of Microbial Enhanced Oil Recovery (MEOR) involves the use of microbes that grow and produce exopolymeric substances, which block the high permeability zones of an oil reservoir, thus allowing the water to flow through the low permeability zones leading to increase in oil recovery. Bacillus licheniformis TT33, a hot water spring isolate, is facultatively anaerobic, halotolerant, and thermotolerant. It produces EPS as well as biosurfactant and has a biofilm-forming ability. The viscosity of its cell-free supernatant is $120\;mPa{\cdot}s$ at $28^{\circ}C$. Its purified EPS contained 26% carbohydrate and 3% protein. Its biosurfactant reduced the surface tension of water from 72 to 34 mN/m. This strain gave $27.7{\pm}3.5%$ oil recovery in a sand pack column. Environmental scanning electron microscopy analysis showed bacterial growth and biofilm formation in the sand pack. Biochemical tests and Amplified Ribosomal DNA Restriction Analysis confirmed that the oil recovery obtained in the sand pack column was due to Bacillus licheniformis TT33.

• Journal of Electrical Engineering and Technology
• /
• 제3권3호
• /
• pp.354-362
• /
• 2008

In this paper, a new algorithm of optimal voltage control is proposed for the Distribution Automation System (DAS) based on constants of four terminal network modeling. In the proposed method, the voltage profiles along feeders are estimated from the measurement of the current and power factor by a Feeder Remote Terminal Unit (FRTU) installed at each node. Whenever the voltage profile violates the restriction, the voltage control strategy is applied to keep the voltage levels along the feeders within the pre-specified range through the modification and coordination of the transformer under-load tap changers (ULTC), step voltage regulator (SVR), as well as shunt condenser. In the case studies, the estimation and control of the voltages have been testified in a radial distribution system with 11 nodes.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 춘계종합학술대회
• /
• pp.33-38
• /
• 1999

컴퓨터 분야에서 얼굴근육 이미지합성은 살아있는 것 같은 모델을 실현하기 위한 가장 실재적인 접근방법 중의 하나이며, 얼굴근육 모델은 얼굴조직 성분과 근육으로 구성된다. 이 모델에서 얼굴 조직 성분에 영향을 주는 힘(force)은 각 근육의 수축강도로써 계산되어지고, 각 근육 파라메터의 결합은 명확한 얼굴표현으로 결정한다. 또한 각 근육 파라메터는 실험과 샘플 사진과 근육편집기로 생성한 명확한 이미지를 비유하여 에러처리과정을 통해 결정된다. 이 논문에서 신경회로망을 사용한 2D(Two-Dimension) 지시점의 움직임으로부터 얼굴근육의 자동인식 방법을 제안하고자 하며, 얼굴모델을 기반으로 한 물리학적 제한하에 캡처된 이미지에서 정보 흐름과 2D 포인트로부터 3D(Three-Dimension) 움직임 인식을 하고자 한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.136-140
• /
• 2006

We are developing a vol-oxidizer which transforms the spent $UO_2$ pellets into the $U_3O_8$ power through oxidizing process. The vol-oxidizer consists of furnace, filter, heater and valve etc. When the filter is blocked by the powder, the internal pressure of the furnace is increased owing to the air flow restriction. Then, the furnace vessel is swelled and deformed by it. In this paper, we proposed a procedure of the thermal analysis for furnace vessel design of spent fuel vol-oxidizer. In this work, we determined the thickness of the furnace through analyzing the internal pressure and the thermal stress of the furnace with respect to various pressure and temperature. To analyze the thermal stress, we used ANSYS 8.0 for constructing a FEM model of the furnace, and then analyzed it based on the ASME code. We also surveyed the material property and yield stress of SUS304 with various temperature. Analysis results are compared with the yield stress of the material. We manufactured the furnace and conduct the verification experiments.