• 한국세라믹학회지
• /
• 제36권7호
• /
• pp.742-750
• /
• 1999

화학기상응축법을 이용한 TiO2 나노분말합성시 전구체 주입속도 및 산소 반응기체유량의 변화에 따른 나노입자의 형성과정을 분말특성의 관점에서 조사하였다. 기상합성반응의 주요 열역학, 동역학적 인자인 과포화도, 충돌율, 체류시간의 상기 두 공정변수에 대한 의존성을 이론적으로 평가하였고, 이를 0.376, 0.742 m//min의 두 전구체 주입속도 조건에서 산소유량을 1에서 2slm까지 변화시키며 합성한 TiO2 나노분말의 특성과 관련하여 분석하였다 모든 조건에서 합성된 TiO2 분말은 20~30 nm의 크기를 갖는 미세한 anatase 상과 극소량의 rutilc상이 혼합되어 서로 느슨한 결합을 하고 있었다 전구체 주입속도가 0.376m//min의 경우, 전반적인 입도와 응집도는 0.742 m//min에 비해 작았으며, 산소유량이 증가할수록 체류시간과 충돌율이 감소하여 형성된 TiO2 분말의 입도는 감소하였다. 또한 산소유량 증가에 따른 과포화도의 감소는 분말형성과정과 기구에 영향을 미치는 것으로 판단되나, 정확한 분석을 위해서는 각각의 독립적인 열역학 및 동역학적 변수 조건하에서의 면밀한 고찰이 요구되었다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.203-205
• /
• 2014

This paper is suggesting about glass melting technology, using both plasma and combustion heat source. The mixed flame was formed to flow pattern of turning by plasma and combustion in melting zone. The burning time was extremely extended for vitrification of raw materials in melting zone, as a result, meting time was significantly reduced. This system was designed to smaller size than existing glass melting facilities. We had achieved to 30% energy saving, due to reduce residence time of melted materials inside furnace.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권3호
• /
• pp.163-170
• /
• 2002

This report describes the use of a transtubular bioreactor to study the relative effects of diffusion versus perfusion of medium on antibody production by a hybridoma cell line. The study was performed with a high-density cell culture maintained in a serum-free, low-protein medium for 77 days. It was determined that the reactor possessed a macro-mixing pattern residence time distribution similar to a continuous stirred tank reactor (CSTR), However, due to the arrangement of the medium lines in the reactor, the flow patterns for nutrient distribution consist of largely independent medium path lengths ranging from short to long. When operated with cyclic, reversing, transtubular medium flow, some regions of the reactor (with short residence times) are more accessible to medium than others (with long residence times). From this standpoint, the reactor can be divided into three regions: a captive volume, which consists of medium primarily delivered via diffusion; a lapped volume, which provides nutrients through unilateral convection; and a swept volume, which operates through bilateral convection. The relative sizes of these three volumes were modified experimentally by changing the period over which the direction of medium flow was reversed from 15 min (larger captive volume) to 9 h (larger swept volume). The results suggest that antibody concentration increases as the size of the diffusion-limited (captive) volume is increased to a maximum at around 30 min with a sharp decrease thereafter. As reflected by changes in measured consumption of glucose and production of lactate, no significant difference in cellular metabolism occurred as the reactor was moved between these different states. These results indicate that the mode of operation of the transtubular bioreactor may influence antibody productivity under serum-free, low-protein conditions with minimal effects on cellular metabolism.

• 공업화학
• /
• 제22권5호
• /
• pp.566-574
• /
• 2011

석탄가스화기는 석탄가스화복합발전과 석탄간접액화 공정에서 고효율을 얻기 위한 중요한 설비 중 하나이다. 현재 여러 종류의 석탄가스화기가 성공적으로 사용되고 있지만, 간단하면서도 신뢰도를 높일 수 있는 다양한 설계 변경이 가능하다. 건식 분류층 가스화기 4종류의 형태를 제시하고 이들을 체류시간, 가스화기 출구 합성가스의 온도, 합성가스 조성을 중점으로 비교하였다. 설계개념이 적정한지를 우선 파악하고자 반응을 배제한(cold-flow) CFD 해석을 먼저 수행하였고, 실제 가스화기 조건을 반영한 화학반응이 고려된(hot-flow) 해석을 수행하여 비교하였다. 가스화기 설계에 CFD를 적용하는 데는 슬랙의 거동과 슬랙탭 설계 등 측면에서 제한적이기는 하지만, 다양한 설계개념 중에서 가능성이 높은 가스화기 형태의 범위를 좁히는 데 매우 유용하게 사용될 수 있다.

• Design & Manufacturing
• /
• 제16권2호
• /
• pp.26-32
• /
• 2022

It is known that the fluidized bed incinerator, which is the subject of analysis, shows excellent performance in heat and mass transfer due to excellent mixing and contact performance between fluidized sand and fuel, and also shows relatively good combustion characteristics thanks to good mixing and long residence time for low-grade fuels. have. In this study, air flow analysis is performed to understand the characteristics of co-firing of sludge, waste oil and solid waste in the fluidized bed incinerator, flow characteristics of flue gas, and discharge characteristics of pollutants.The fluidized bed incinerator subject to analysis is a facility that incinerates factory waste and general household waste together with sludge, with a processing capacity of 32 tons/day. to be. In addition, the operation method was designed for continuous operation for 24 hours. As a result, it can be seen that the lower combustion air and the introduced secondary air are changed to a strong turbulence and swirl flow form and exit through the outlet while rotating inside the freeboard layer. The homogeneous one-way flow form before reaching the secondary air nozzle has very high diffusivity with the high-speed jet flow of the nozzle.

• 한국지반환경공학회 논문집
• /
• 제10권1호
• /
• pp.5-14
• /
• 2009

본 연구에서는 유효수직응력의 영향을 받고 있으며, 공간적으로 상관된 간극분포를 포함하고 있는 단일 균열 내에서의 용질이동에 대한 공간적 거동을 수치적으로 분석하였다. 분석결과 단일 균열에서의 용질이동은 간극분포의 공간적 상관정도와 적용된 유효수직응력에 크게 영향을 받는 것으로 나타났다. 공간적 상관길이가 증가함에 따라 용질입자의 평균이동시간은 감소하였으며, 또한 용질이동에 대한 굴곡도와 Peclet 수(유체흐름에 의한 용질의 이송율과 분자확산율과의 관계를 나타내는 무차원 수)가 감소하는 경향을 나타내었다. 이는 공간적 상관길이가 증가할수록 단일 균열 내의 간극분포가 용질입자의 이동에 유리하다는 것을 의미한다. 그러나 유효수직응력이 증가할수록 용질입자의 평균이동시간과 굴곡도는 증가하는 경향을 나타냈으며, Peclet 수는 감소하는 경향을 나타냈다. 이는 유효수직응력이 증가할수록 접촉면의 증가로 인해 한 두 개의 상대적으로 큰 국부유량을 가지는 유로를 따라 이동하기 때문인 것으로 판단된다. 또한 본 연구에서 용질이동에 대한 모의된 결과에 근거하여 공간적 상관길이에 따른 유효수직응력과 용질의 평균이동시간과의 관계를 나타내는 지수형태의 상관식을 제안하였다.

• 한국환경과학회지
• /
• 제11권6호
• /
• pp.543-551
• /
• 2002

A Numerical simulation on the thermal flow performance was carried out to propose the incinerator type for the domestic refuses and to investigate the design factor and operating conditions. The SSTI(Standard Stoker Type Incinerator) proposed in this study was modified from the type with central f)ow. It has the characteristics of good mixing between refuse and hot combustion gas in primary combustion chamber and between unburned gas inflowing and secondary air jet in secondary chamber. By predictive results, the SSTI was no recirculation zone in secondary chamber so that mixing time was increased with high residence time. It has good characteristics of combustion and low emission. Parametric screening studies have been understood with phenomenon of combustion in incinerator.

• 동력기계공학회지
• /
• 제11권2호
• /
• pp.64-71
• /
• 2007

The main purpose of this study is to analyze the characteristics of toluene removal by plasma, photocatalyst, and plasma/photocatalyst system with the major parameters such as flow rate, inlet toluene concentration and applied voltage, etc., experimentally. In the combined plasma/photocatalyst process, rates of toluene conversion are represented as 99% at flow rate 250, 500 mL/min while, below 97% at flow rate 1000 mL/min due to the low residence time(reaction time) at the same applied voltage 4173 voltage and toluene inlet concentration 50 ppm. The intermediate products are detected by GC/MS analysis showing the small amounts of benzoic acid, benzyl alcohol and residual ozone concentration $0.04{\sim}0.05$ ppm generated by plasma process in the present system.

• 한국축산시설환경학회지
• /
• 제21권2호
• /
• pp.65-70
• /
• 2015

Total three hundred and fourteen dairy cows were used in this study to analysis of correlation between milking levels and automatic milking system (AMS). Cows were divided into five groups according to their milking levels (over 50 kg/day, 49~40 kg/day, 39~30 kg/day, 29~20 kg/day, 19~10 kg/day). All groups were compared with daily milking number, rejected number by AMS, residence time at AMS, milking time, flow rate of milk. Daily milking number and milking time were higher in the group of over 50 kg and 49~40 kg than that of other groups (p<0.05). There are no correlation on rejected number by AMS, residence time at AMS and flow rate of milk between milking levels and AMS. In addition, we found that the milk yield affected to feed intake and rumination of dairy cows. In conclusion, present results indicated that installation of AMS on dairy farms with high milk producing cows might be affected positively.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.32-33
• /
• 2003

Mechanism of a periodic oscillation of shock-induced combustion over a two- dimensional wedges and axi-symmetric cones were investigated through a series of numerical simulations at off-attaching condition of oblique detonation waves(ODW). A same computational domain over 40 degree half-angle was considered for two-dimensional and axi-symmetric shock-induced combustion phenomena. For two-dimensional shock-induced combustion, a 2H2+02+17N2 mixture was considered at Mach number was 5.85with initial temperature 292 K and initial pressureof 12 KPa. The Rankine-Hugoniot relation has solution of attached waves at this condition. For axi-symmetric shock-induced combustion, a H2+2O2+2Ar mixture was considered at Mach number was 5.0 with initial temperature 288 K and initial pressure of 200 mmHg. The flow conditions were based on the conditions of similar experiments and numerical studies.[1, 3]Numerical simulation was carried out with a compressible fluid dynamics code with a detailed hydrogen-oxygen combustion mechanism.[4, 5] A series of calculations were carried out by changing the fluid dynamic time scale. The length wedge is varied as a simplest way of changing the fluid dynamic time scale. Result reveals that there is a chemical kinetic limit of the detached overdriven detonation wave, in addition to the theoretical limit predicted by Rankine-Hugoniot theory with equilibrium chemistry. At the off-attaching condition of ODW the shock and reaction waves still attach at a wedge as a periodically oscillating oblique shock-induced combustion, if the Rankine-Hugoniot limit of detachment isbut the chemical kinetic limit is not.Mechanism of the periodic oscillation is considered as interactions between shock and reaction waves coupled with chemical kinetic effects. There were various regimes of the periodicmotion depending on the fluid dynamic time scales. The difference between the two-dimensional and axi-symmetric simulations were distinct because the flow path is parallel and uniform behind the oblique shock waves, but is not behind the conical shock waves. The shock-induced combustion behind the conical shockwaves showed much more violent and irregular characteristics.From the investigation of characteristic chemical time, condition of the periodic instability is identified as follows; at the detaching condition of Rankine-Hugoniot theory, (1) flow residence time is smaller than the chemical characteristic time, behind the detached shock wave with heat addition, (2) flow residence time should be greater than the chemical characteristic time, behind an oblique shock wave without heat addition.