• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2000년도 제15회 학술강연회논문초록집
• /
• pp.3-3
• /
• 2000

저추진력 추력기라는 것은 추력이 수 N 정도, 노즐출구직경이 수 mm 정도의 소형추력기를 의미하며, 주로 인공위성을 비롯한 우주 비행체의 자세제어, 궤도천이 등의 목적을 위해 사용된다. 따라서, 저추진력 추력기의 일반적인 작동환경은 연속체 영역, 천이영역(transition flow regime), 희박영역(rarefied flow regime)을 모두 포함하므로, 기존의 연속체 유체역학에서 사용되는 Navier-Stokes 방정식을 사용할 수 없고, 분자들의 미시적인 움직임과 내부 에너지 분포를 고려한 Boltzmann 방정식을 이용한 해석을 수행하여야 한다.(중략)

• 한국농공학회지
• /
• 제30권4호
• /
• pp.109-116
• /
• 1988

This study was aimed at determining a regime of flow through rubble mound dike consisted of all sized quarrystons, and deriving a relationship between hydraulic gradient (I) and mean flow velocity (V) through the dike. The analysis was carried out with the data observed after final gap closing of the Haenam Sea dike from May, 6 to May, 14, 1987. The resu]ts are summarized as follows: 1. The regime of flow would be defined as the turbulent flow. 2. As to the relationships, two kinds of formula that are exponential and binomial were obtained. Exponential formula: I=2.099V 1.2888 Binomial formula: I=0.6113V+5.5235V$^2$ 3. Correlation coefficient of the former was 0.824 and that of the latter was 0.821, and the deviations between observed data and estimated were 0.0070 and 0.0064 respectively. 4. Comparing the correlation coefficient, both the equations have the same correlation coefficients, but in case of the deviation the binomial equation was better than the exponential equation. Therefore, the binomial equation is proposed for analyzing the flow through rubble mound dike.

• 한국추진공학회지
• /
• 제1권2호
• /
• pp.22-31
• /
• 1997

비직교 일반좌표계를 사용하는 범용 연소유동해석 프로그램을 개발하여 재순환영역을 가지는 연소유동 등을 해석하였다. 본 프로그램은 유한체적법에 근간을 둔 비엇갈림격자계를 사용하며 직교좌표 속도성분을 종속변수로 하였다. 연소모델은 무한반응속도의 1단계 비가역 반응을 고려하였으며, 밀도가중평균된 지배방정식을 고려하였다. Conserved Scalar의 확률밀도함수를 clipped gauss 분포로 가정하였다 본 프로그램을 사용하여 재순환영역을 가지는 난류확산화염을 계산하였다. 계산결과는 실험결과와 마찬가지로 두개의 재순환영역을 보였으며, 속도, 난류운동에너지, 온도 및 농도 등이 실험결과와 양호하게 일치하는 결과를 얻을 수 있었다.

• 에너지공학
• /
• 제15권1호
• /
• pp.1-7
• /
• 2006

원자력발전소의 다차원 이상 유동 현상을 적절히 모사하기 위해 일차원 계통해석 코드에 삼차원 유동모델을 적용하였다. 그 중 다차원모델에 새롭게 적용된 이상 난류모델을 검증하기 위해 사각 slab 내부의 단상유동을 계산하여 상용 CFD 코드의 계산결과와 비교하였다. 그 결과 단상유동의 경우 난류 모델의 계산이 적절히 수행됨을 알 수 있었다. 또한 다차원 이상 유동 계산을 검증하기 위해서 RPI에서 수행된 물-공기 다차원 실험의 기포율 분포를 비교하였다. 그 결과 다차원 모델의 이상 유동 계산을 위해서는 일차원 기반의 유동양상 맵 중 수평 분리 유동양상이 제거되어야 함을 알 수 있었다. 이와 같이 유동양상 맵을 수정하여 모사한 계산결과가 실험에서 측정된 기포율의 경향을 잘 따르는 것으로 계산되었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.459-468
• /
• 2009

Analysis of the uncertainty to have engineering solution of gas-dynamic and hydrodynamic problems is based on the comparison the prospective engineering solution with experimental result. In this paper, the mathematical model to estimate heat flux along gas-dynamic channel wall and the solution sequence are shown. Statistical information and generalizing experimental characteristics about gas- and hydro-dynamic channels were applied to the mathematical model. As the results, it is possible to draw a conclusion that models of the integrated approach, using the averaged statistical data of generalizing characteristics for a turbulent flow, without consideration of the turbulent mechanism (characteristic pulsations), can predict a nominal operating regime for gas-dynamic and hydrodynamic systems. The probable deviation of operating regime for newly designed the gas-dynamic channel can achieve 20% from a regime predicted on a basis 1-D or 3-D modelling irrespective of a kind of used models.

• 한국공작기계학회논문집
• /
• 제17권2호
• /
• pp.45-50
• /
• 2008

Molecular flows inside a guide block in the OLED(organic luminescent emitting device) deposition process have been simulated using DSMC(direct simulation Monte Carlo) method. Because the organic materials are evaporated under vacuum, molecules flow at a high Knudsen number of the free molecular regime, where the continuum mechanics is not valid. A guide block is designed as a part of the linear cell source to transport the evaporated materials to a deposition chamber, When solving the flows, the inlet boundary condition is proved to affect significantly the whole flow pattern. Thus, it is proposed that the pressure should be specified at the inlet. From the analysis of the density distributions at the nozzle exit of the guide block, it is shown that the longer nozzle can emit molecules more straightly. Finally, a nondimensionalized mass flow profile is obtained by numerical experiments, where various nozzle widths and inlet pressures are tested.

• Nuclear Engineering and Technology
• /
• 제50권1호
• /
• pp.43-53
• /
• 2018

It is important to clarify the characteristics of flow regimes underlying the debris bed formation behavior that might be encountered in core disruptive accidents of sodium-cooled fast reactors. Although in our previous publications, by applying dimensional analysis technique, an empirical model, with its reasonability confirmed over a variety of parametric conditions, has been successfully developed to predict the regime transition and final bed geometry formed, so far this model is restricted to predictions of debris mixtures composed of spherical particles. Focusing on this aspect, in this study a new series of experiments using nonspherical particles have been conducted. Based on the knowledge and data obtained, an extension scheme is suggested with the purpose of extending the base model to cover the particle-shape influence. Through detailed analyses and given our current range of experimental conditions, it is found that, by coupling the base model with this scheme, respectable agreement between experiments and model predictions for the regime transition can be achieved for both spherical and nonspherical particles. Knowledge and evidence from our work might be utilized for the future improvement of design of an in-vessel core catcher as well as the development and verification of sodium-cooled fast reactor severe accident analysis codes in China.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 춘계학술발표회요약집
• /
• pp.115-115
• /
• 1999

To demonstrate the applicability of RELAP5 to the prediction of the onset offlooding in the hot leg at the reflux condensation phase during mid-loop operation, numerical analysis is performed for the counter-current flow in a horizontal pipe with the inclined riser using the RELAP5/MOD3.2.2b code. It is found that the RELAP5, simulating the CCFL phenomena using interfacial friction along with the flow regime map in the horizontal pipe, produces unsatisfactory results. Under the CCFL condition, it is observed that large oscillation exists in the flow rate, void fraction, and etc. and the liquid flow rate is much lower than that predicted by the CCFL model measured in the experiment. The CCFL model of RELAP5 for the vertical volume is extended to the model for the horizontal and inclined volumes. The horizontal volume flow regime map and interfacial friction model coupled to the CCFL model are modified. And a new correlation developed from Kang's experiment is implemented to the CCFL model of RELAP5. With this modified RELAP5, the analysis of CCFL phenomena in the horizontal pipe and hot leg geometry is performed, and produces reasonable results in comparison with experimental data.

• 한국물환경학회지
• /
• 제27권2호
• /
• pp.228-234
• /
• 2011

The goal of water quality management on stream and watershed is to focus not on discharged loads management but on a water quality management. Discharged loads management is not goal of water quality management but way for perform with total maximum daily loads management. It is necessary to estimate the relation between non-point source with stromwater runoff (NPSSR) and water quality to select a watershed where it is required to manage NPSSR for water quality improvement. To evaluate the effects of NPSSR on stream's water quality, we compare the aspects of water quality in dry and wet seasons using flow duration curve analysis based on flow rate variation data by actual surveying. In this study we attempt to quantify the variation characteristic of water quality and estimate the Inflow characteristic of pollution source with water quality and flow rate monitoring on 10 watersheds. We try to estimate water quality and flow rate by regression analysis and try again regression analysis with each high and low water quality data more than estimations. An analysis of relation between water quality and flow rate of 10 watersheds shows that the water quality of the Nonsan and the Ganggyeong streams had been polluted by NPSSR pollutants. Other eight streams were important point source more than NPSSR. It is wide variation range of $BOD_5$ also high average concentration of $BOD_5$. We have to quantify water quality variation by cv1 in wet season and cv365 in dry season with comparing the estimate of high water quality and low water quality. This method can be used to indicator for water quality variation according to flow rate.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.1335-1339
• /
• 2004

A hydro-geomorphologic change in a sand bed channel reach and vegetation expansion by changes in the How regime is analyzed in this study. Field and aerial photo surveys, basic hydrological analysis about flow regime change due to two dams, Andong Dam and Imha Dam, on the upstream river and computer modeling are conducted. Two Dams in the study reach have obviously affected downstream channel in many ways including the bed particle coarsening, vegetation expansion on the sandbars and following river channel braiding. The phenomenon of no vegetation on the large point bar in front of Hahwe Village seems due to disturbance of the sandbar surface probably due to the cross flow in the meander reach during the flood. Another reason for no vegetation is that the sandbar on this reach has lower subsurface water lovels, as compared with the others in the up- and downstream of the reach where vegetation expanded, which would hinder vegetation from germinating and growing on the sandbar.