• 제목/요약/키워드: Flow Mobility

검색결과 276건 처리시간 0.026초

Transmission Path Analysis of Noise and Vibration in a Rotary Compressor by Statistical Energy Analysis

  • Hwang, Seon-Woong;Jeong, Weui-Bong;Yoo, Wan-Suk;Kim, Kyu-Hwan
    • Journal of Mechanical Science and Technology
    • /
    • 제18권11호
    • /
    • pp.1909-1915
    • /
    • 2004
  • The hermetic rotary compressor is one of the most important components of an air conditioning system since it has a great effect on both the performance and the noise and vibration of the system. Noise and vibration occurs due to gas pulsation during the compression process and to unbalanced dynamic force. In order to reduce noise and vibration, it is necessary to identify their sources and transmission path and effectively control them. Many approaches have been tried in order to identify the noise transmission path of a compressor. However, identification has proven to be difficult since the characteristics of compressor noise are complicated due to the interaction of the compressor parts and gas pulsation. In this study, the statistical energy analysis has been used to trace the energy flow in the compressor and to identify the transmission paths from the noise source to the exterior sound field.

PMIPv6 네트워크에서 트리거에 따른 플로우 이동성 관리 절차 비교 (Comparison of Flow Mobility Management Procedures based on Triggers in PMIPv6 Network)

  • 선경재;김영한;김용원
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2012년도 한국컴퓨터종합학술대회논문집 Vol.39 No.1(D)
    • /
    • pp.465-467
    • /
    • 2012
  • PMIPv6(Proxy Mobile IPv6)는 이동 노드(Mobile Node: MN)을 대신하여 엑세스 네트워크에서 노드의 이동성을 지원하기 위한 프로토콜로써 네트워크-기반 이동성 지원 기법이다. PMIPv6 프로토콜에서는 또한 여러 개의 인터페이스를 가지고 있는 MN이 각각의 인터페이스를 이용하여 도메인에 접속할 수 있게 함으로써 데이터 서비스를 다른 인터페이스로 이동하여 받을 수 있도록 하는 플로우 이동성에 대한 논의가 활발히 이루어지고 있다. 이 논문에서는 특별히 플로우 이동성에서 고려해야 할 문제 중의 하나인 트리거에 따른 플로우 이동성 관리에 대해 표준 제안들과 비표준 제안들의 절차를 비교한다.

반도체 세정 공정 평가를 위한 나노입자 안착 시스템 개발

  • 남경탁;김호중;김영길;김태성
    • 한국반도체및디스플레이장비학회:학술대회논문집
    • /
    • 한국반도체및디스플레이장비학회 2007년도 춘계학술대회
    • /
    • pp.128-131
    • /
    • 2007
  • As the minimum feature size decrease, control of contamination by nanoparticles is getting more attention in semiconductor process. Cleaning technology which removes nanoparticles is essential to increase yield. A reference wafer on which particles with known size and number are deposited is needed to evaluate the cleaning process. We simulated particle trajectories in the chamber by using FLUENT. Charged monodisperse particles are generated using scanning mobility particle sizer (SMPS) and deposited on the wafer by electrostatic force. The experimental results agreed with the simulation results well. We calculate the particles loss in pipe flow theoretically and compare with the experimental results.

  • PDF

PMIPv6 도메인에서 플로우 이동성 지원 기술 연구 (Study on Flow Mobility based on Logical Interface in Proxy MIPv6 Domain)

  • 윤주상;백상헌
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2011년도 춘계학술대회
    • /
    • pp.177-179
    • /
    • 2011
  • 본 논문은 멀티인터페이스 이동 노드에서 플로우 이동성을 지원하기 위해 PMIPv6 프로토콜 기반의 HNP 변환 기술을 제안한다. 기본적으로 PMIPv6 프로토콜은 멀티인터페이스 지원 기술이 제공하고 있다. 하지만 이 기능은 멀티이터페이스 간의 플로우 기반 이동성을 제공하지 못하고 있다. 이는 효율적인 인터페이스 사용이 가능하지 못함을 위미 한다. 따라서 효율적인 인터페이스 사용을 위해 네트워크 계층과 링크 계층 사이에 논리인터페이스가 필요하며 이를 기반으로 플로우 이동성을 제공하는 기능이 필요하다. 본 논문에서는 플로우 이동성 관점에서 플로우 이동성 지원 기능을 정의한다.

  • PDF

Improving performance of organic thin film transistor using an injection layer

  • Park, K.M.;Lee, C.H.;Hwang, D.H.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
    • /
    • pp.1413-1415
    • /
    • 2005
  • The OTFT performance depends strongly on the interfacial properties between an organic semiconductor and ${\alpha}$ metal electrode. The contact resistance is critical to the current flow in the device. The contact resistance arises mainly from the Schottky barrier formation due to the work function difference between the semiconductor and electrodes. We doped pentacene/source-drain interfaces with $F_4TCNQ$ (2,3,5,6-Tetrafluoro-7,7,8,8-tetracyanoquinodimethane), resulting in p-doped region at the SD contacts, in order to solve this problem. We found that the mobility increased and the threshold voltage decreased.

  • PDF

아음속 풍동을 이용한 구조물 형상 변화에 따른 살리실산메틸 확산 유동 연구 (A Study on the Methyl Salicylate Dispersion in the Vicinity of Obstacles by Wind Tunnel Test)

  • 홍창기;엄환섭;최승기;김윤제
    • 한국유체기계학회 논문집
    • /
    • 제17권6호
    • /
    • pp.69-73
    • /
    • 2014
  • To predict flow fields and chemical agent dispersion in urban area, wind tunnel experiments was performed. The agent was adopted MS (methyl salicylate) because the real chemical agent is unsafe. The exact concentration of methyl salicylate was generated by the commercial gas generator (STI-2500) and three different obstacle shapes were applied (i.e., rectangular, cylinder and pyramid). The concentration was measured with the qualified ion mobility sensor and gas chromatography. The data necessary for virtual test method of the real chemical agent were obtained.

Electrokinetic Soil Flushing with Nonionic Surfactant for Removal of Phenanthrene

  • 이유진;박지연;김상준;기대정;양지원
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2003년도 추계학술발표회
    • /
    • pp.356-359
    • /
    • 2003
  • Polycyclic aromatic hydrocarbons (PAHs) are representative hydrophobic organic carbons (HOCs). Surfactant-enhanced electrokinetic (EK) remediation is an innovative in-situ technology that can effectively remove HOCs from low-permeability soils. In this study, the electrokinetic remediation using Tergitol 15-S-12, a nonionic surfactant, was conducted for the removal of phenanthrene from kaolinite. Tergitol 15-S-12 was used at concentrations of 1.5, 2.0, 2.5 and 7.5 g/L to enhance the solubility of phenanthrene. When the surfactant solution was applied to EK system, high electrical potential gradient was maintained and the amount of electroosmotic flow decreased. Removal efficiency of phenanthrene was proportional to the concentration of Tergitol 15-S-12 because the solubility and mobility of phenanthrene was enhanced by surfactant micelle. Therefore, the suitable concentration of nonionic surfactant Tergitol 15-S-12 is expected to improve the removal efficiency of PAHs in EK remediation.

  • PDF

Penetration Efficiency of Charged Particles in a Cylindrical Tube Connection with Electrical Voltage Difference

  • Song, Dong-Keun;Kim, Tae-Oh
    • Journal of Korean Society for Atmospheric Environment
    • /
    • 제23권E1호
    • /
    • pp.29-38
    • /
    • 2007
  • A cylindrical tube connection that has a voltage difference and is separated electrically by an insulator was modelled. The penetration efficiencies of charged particles passing through the connector tube were investigated. Typically, as the particle size decreases and the applied voltage difference increases, the penetration efficiency decreases. To assess the effect of the electrode geometry, various lengths of electric insulator and aerosol flow rate with a fixed tube length and tube diameter were used when calculating penetration efficiencies. The comparison of penetration efficiencies for various electrode geometry setups suggests that the penetration efficiency can be described as a function of the product of applied voltage and electrical mobility of charged particles. The diffusion loss from this and previous studies are compared. Further, an explicit form for penetration efficiency is provided as a function of a new non-dimensional parameter, $Es(=Z_pV/U_{avg}W);\;P_{es}=0.2{\cdot}{\exp}(-Es/0.6342)+0.8{\cdot}{\exp}(-Es/4.7914)$.

Characterization of Low-Temperature Graphene Growth with Plasma Enhanced Chemical Vapor Deposition

  • Ma, Yifei;Kim, Dae-Kyoung;Xin, Guoqing;Chae, Hee-Yeop
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.421-421
    • /
    • 2012
  • Graphene has drawn enormous attention owing to its outstanding properties, such as high charge mobility, excellent transparence and mechanical property. Synthesis of Graphene by chemical vapor deposition (CVD) is an attractive way to produce large-scale Graphene on various substrates. However the fatal limitation of CVD process is high temperature requirement(around $1,000^{\circ}C$), at which many substrates such as Al substrate cannot endure. Therefore, we propose plasma enhanced CVD (PECVD) and decrease the temperature to $400^{\circ}C$. Fig. 1 shows the typical structure of RF-PECVD instrument. The quality of Graphene is affected by several variables. Such as plasma power, distance between substrate and electronic coil, flow rate of source gas and growth time. In this study, we investigate the influence of these factors on Graphene synthesis in vacuum condition. And the results were checked by Raman spectra and conductivity measurement.

  • PDF

Ozone Assisted-MOCVD로 제작된 산화주석막의 전기적 광학적 특성 (Electrical and Optical Properied of Tin Oxide Films Prepared by Ozone Assisted-MOCVD)

  • 배정운;이상운;송국현;박정일;박광자;염근영
    • 한국표면공학회지
    • /
    • 제31권2호
    • /
    • pp.109-116
    • /
    • 1998
  • Highly transparent conductive pure and fluorine-doped tin oxide(FT0, $SnO_2$ : F) films have been prepared by low pressure metal organic chemical vapor deposition (LP-MOCVD) from various mixtures of tetramethyitin(TMT) with oxygen or oxygen containing ozone. The properties of TO films have been changed with the variation of gases, flow rate, and substrate temperature. The nsing of oxygen containing ozone instead of pure oxygen, reduced substrate temperature by 100-$150^{\circ}C$ while maintaining same thickness. The films prepared by using ozone showed the resistivity in the range from $10^~2$ to $10^{~3}\Omega$cm, and the mobiiity from 10 to $14\textrm{cm}^2$/Vs. Fluorine-doped tin oxide films had properties such as the resistivity about $10^{-4}\Omega$cm, and the mobility from 14 to $19\textrm{cm}^2$/Vs.

  • PDF