• The Journal of the Acoustical Society of Korea
• /
• v.30 no.1
• /
• pp.9-16
• /
• 2011

When a hydrofoil ship plies at high speed, there exist possibilities of collision with ocean mammals dwelling near the surface. An active sonar located within the immersed hydrofoil structure that provides the lift for the vessel, can be used for early warning of their presence. The proper functioning of the active sonar system depends on its ability to reject noise and pick up the target signal. In this article, we measured the noise on a hydrofoil of an operating ship with two flush-mounted hydrophones. The measurements were conducted for the purpose of (1) identifying the effect of operating state of machinery likes engine, cooler and generator (2) observing the change of noise depending on the measuring position (3) observing the change of noise with increasing ship speed. To verify our experiment, experiments were performed three times and the measured results are compared with other investigations and they show similarity to each other. The results are analyzed with frequency domain in order to apply to operating active sonar detecting system and focus on high frequency band within sonar's operating frequency region. Through these experiments and analysis, it is expected that we can identify the generated noise around hydrofoil where active sonar is installed and these results lead us to design active sonar that could distinguish target signal from noise more effectively.

• Journal of the Korean Institute of Gas
• /
• v.24 no.3
• /
• pp.33-39
• /
• 2020

In general, in a batch reaction process in which products are made using flammable liquids, splash filling is used to clean the walls of the reactor by spraying flammable liquids, which are raw materials used for product, during cleaning of the reactor after work. During this process, mist of flammable liquid is generated, the lower limit of explosion is lowered, and fire·explosion may occur due to discharges caused by various types of complex charges, such as flow charge, collision charge, and ejection charge. Therefore, based on the recent accident case, to identify the risk when working in the form of splash filling with toluene in a batch process and perform an explosion impact analysis using the TNT equivalent method After that, we will analyze the accident results and suggest preventive measures such as constant purge system, improvement of cleaning method, and use of tantalum to prevent such accident.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.369-376
• /
• 2019

Ship hydrodynamics in the confined waterways is challenging. When a ship is maneuvering in confined waterways, the hydrodynamic behavior may vary significantly because of the hydrodynamic interaction between the bottom of the ship hull and the seabed, or so-called shallow water effects. Thus, an accurate prediction of shallow water and bank effects is essential to minimizing the risk of the collision and the grounding of the ships. The hydrodynamic derivatives measured by the virtual captive model test provide a path to predicting the change in ship maneuverability. This paper presents a numerical simulation of captive model tests to predict the maneuverability of a ship in confined waterways. Also, straight and zig-zag simulation were conducted to predict the trajectory of a ship maneuvering in confined waterways. The results showed that the asymmetric flow around a ship induced by vicinity of banks causes pressure differences between the port and starboard sides and the trajectory of a ship maneuvering in confined waterways.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1377-1387
• /
• 2013

Most embankment of the reservoirs (99.1 %) have been constructed in the earth filled type in Korea because the construction of this type is less expensive and simpler than others such as concrete one. However, it has to be reinforced the slope to prevent the breach due to overtopping or piping under unexpected flood conditions. This study has been analyzed the retardation effect using three types (L, T, $L^*$ shape) of stiffener in order to reinforce embankment when they are collapsed by overtopping flow. Experimental results showed that L-type stiffener is the most effective in delaying the breaching of embankment and reducing the soil erosion when compared with others. The reinforced embankment breaching showed that time delay was occurred about 1.73 to 2.29 times and the peak flowrate was reduced compared to non-stiffener embankments due to energy dissipation by collision and less soil erosion. The embankment breaching mostly leads to major damages because of the lack of repair time. Thus, since these stiffeners can resist the rapid breach, it would be possible to earn the time to emergency repair and lifesaving, as well as reduction of damages of embankment in downward region with decreasing peak flowrate. Results from this study would be used for the basis when establishing the emergency action plan for the reservoirs on the verge of hazard.

• Journal of Navigation and Port Research
• /
• v.41 no.6
• /
• pp.445-450
• /
• 2017

It is necessary to set a route to reflect the traffic flow for the safety of the traffic vessels. This ongoing analysis is needed to ensure that the vessels comply with a route. The purpose of this study is to discover the problems of the recommended route vicinity for Wando Harbor and suggest an improvement plan. We used a support vector machine based on the ship's trajectory to establish an efficient route center line. Since the vessels should navigate to the starboard side, with reference to the center line of the recommended route, the trajectories of the vessels were divided into two clusters. The support vector machine is being used in many fields such as pattern recognition, and it is effective for this binary classification. As a result of this study, about 79.5 % of the merchant eastbound ships in a 2.4 NM distance to Jangjuk Sudo did not observe the recommended route, so the risk of collision always existed. The contraflow traffic rate of the route of the eastbound ships decreased from 79.5 % to 30.9 % when the recommended route was reset about 300 meters to the north, from its present position. The support vector machine applied in this study is expected to be applicable, to effectively set the route center line because the ship trajectories can be classified into two clusters.

• Analytical Science and Technology
• /
• v.13 no.4
• /
• pp.504-510
• /
• 2000

The impurity profiles from the raw materials of glycyrrhizin were performed by the high performance liquid chromatography (HPLC)/electrospray ionization (ESI)- mass spectrometry (MS). For the HPLC experiment, a $C_{18}$($3.9{\times}300mm$, $10{\mu}m$) column was used and the mobile phase was acetic acid/$H_2O$ (1:10):acetonitrile=3:2 with a flow rate of 0.8 ml/min. The effluent was splitted into the ratio of 50:1 and went into the ESI-MS. Three to six impurities were found and informed of the identification of the structure of the impurities by ESI-MS. And the structures of impurities were suggested to a hydroxy-glycyrrhizin which is added with hydroxy group (-OH) in the glycyrrhetic acid moiety and a reduced-glycyrrhizin which the position of 12 of the glycyrrhetic acid moiety is reduced. The purities of the standard materials were about 90%.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.858-862
• /
• 2018

The purpose of this study is to improve the current vessel departure control regulations to prevent traffic congestion after the lifting of vessel departure controls due to restricted visibility. AIS data was collected to analyze the traffic volume of normal traffic flow and after departure control. A statistical test was conducted to confirm the difference in traffic volume at peak hours according to whether or not departure control was used. The results of the t-test showed that there was a significant difference in traffic volume among groups of less than 10,000 tons in gross tonnage. However, the Mann-Whitney test showed no difference in traffic volume regardless of vessel control. Small and medium-sized vessels of less than 10,000 tons after departure control increased in traffic volume by 142% over normal traffic, and it was concluded that traffic congestion resulted as these small and medium-sized vessels were departing at the same time as large vessels of more than 10,000 tons. In order to prevent vessel collision accidents due to traffic congestion, it is suggested that the navigability of vessels less than 160 m or less than 10,000 tons should be improved.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.926-929
• /
• 2014

In Korea MVNO was introduced in 2011 when twenty seven years had passed since Korea Mobile Telecom started mobile phone service in 1984. Whithout having its frequency bands and network facilities MVNO can resell the mobile telecom services to the consumers by purchasing MNO's service. That can bring competition more efffective that can lower communication costs through the alternatives. In the early 2000s, the need for the introduction of the MVNO has been raised already by scholars in Korea. But it wasn't until the late 2000s, rate cuts appeared to be a major policy issue, and in 2011 Korean government begin to try to introduce its own MVNO's. In may 2014, MVNO's mobile communication market share reached 6%, but Korea dose not have a firm system yet. However, if government authorities did not insist 3 mobile telecom companies system and recognize global MVNO flow quickly the national cost would be significantly reduced. In the mean time mobile telecom companies have maintained similar billing system and level of service but competed to attract consumers only. It looks like some level of mutual collision and the government cannot help recognizing the situation but it did not do any effective policy improvement effort and government only levied penalties.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3D
• /
• pp.295-306
• /
• 2008

The Intersection is inner traffic facilities and the space where the roads are intersected and connected. And also, the Intersection is the decision-making section for drivers to select the route according to the geometric structure and operation method. However decision-making section cause to raise car accidents rate because it imposes a heavy burden on drivers. In that reason, many countries such as Europe use the Roundabouts to reduce the numbers of decision making and collision. In Korea, the kinds of method are just introduced and it is using now but there are no exact standards. Hence, this study suggests the process to evaluate and determine the types of Intersection which are based on the traffic flow (congestion) and traffic safety (accidents). Firstly, this study presents the number of accident at each Intersection which is depended on the traffic volume. Secondly, this study calculates and analysis the accident at signalized Intersection, non-signalized Intersection and Roundabout by TSIS-NETSIM program. Thirdly, this study concludes the best suitable Intersection type through the materials which are mentioned before.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.1
• /
• pp.74-81
• /
• 2024

In the near future, autonomous ships, ships controlled by shore remote control centers, and ships operated by navigators will coexist and operate the sea together. In the advent of this situation, a method is required to evaluate the safety of the maritime traffic environment. Therefore, in this study, a plan to evaluate the safety of navigation through ship control simulation was proposed in a maritime environment, where ships directly controlled by navigators and autonomous ships coexisted, using autonomous operation technology. Own ship was designed to have autonomous operational functions by learning the MMG model based on the six-DOF motion with the PPO algorithm, an in-depth reinforcement learning technique. The target ship constructed maritime traffic modeling data based on the maritime traffic data of the sea area to be evaluated and designed autonomous operational functions to be implemented in a simulation space. A numerical model was established by collecting date on tide, wave, current, and wind from the maritime meteorological database. A maritime meteorology model was created based on this and designed to reproduce maritime meteorology on the simulator. Finally, the safety evaluation proposed a system that enabled the risk of collision through vessel traffic flow simulation in ship control simulation while maintaining the existing evaluation method.