• Bulletin of the Korean Chemical Society
• /
• 제26권9호
• /
• pp.1369-1380
• /
• 2005

The reaction of methyl radical with iodine molecule on an attractive potential energy surface is studied by classical trajectory procedures. The reaction occurs over a wide range of impact parameters with the majority of reactive events occurring in the backward rebound region on a subpicosecond scale. A small fraction of reactive events take place in the forward hemisphere on a longer time scale. The ensemble average of reaction times is 0.36 ps. The occurrence of reactive events is strongly favored when the incident radical and the target molecule align in the neighborhood of collinear geometry. Since the rotational velocity of I2 is slow, the preferential occurrence of reactive events at the collinear configuration of $CH_3{\ldots}I{\ldots}$I leads to the reaction exhibiting an anisotropic dependence on the orientation of $I_2$. During the collision, there is a rapid flow of energy from the $H_3C{\ldots}$I interaction to the I-I bond. The $CH_3I$ translation and $H_3C$-I vibration share nearly all the energy released in the reaction, and the distribution of the vibrational energy is statistical. The reaction probability is $\cong$0.4 at the $CH_3$ and I2 temperatures maintained at 1000 K and 300 K, respectively. The probability is weakly dependent on the $CH_3\;and\;I_2$ temperatures between 300 K and 1500 K.

• 한국추진공학회지
• /
• 제3권1호
• /
• pp.9-14
• /
• 1999

작동조건이 두개의 공기충돌형 연료분사장치로부터 분사되는 이중분무 특성에 미치는 영향을 공연비 1.36∼3.54의 범위에서 실험적으로 수행하였다. 물과 질소가스가 실험유체로서 사용되었다. 분무 액적의 분포특성은 질량분포와 순간영상 촬영법에 의하여 측정되었다. 실험적 결과는 ROA(축방향에 대한 반경방향 공급압력비)의 증가에 따라 질량분포곡선의 최대값은 낮아지면서 더 넓은 영역에 걸쳐 분포하였으며 공급유체의 증가에 따른 질량중심점의 위치는 변화가 없었다. 노즐간격 증가는 간섭영역에서의 질량분포에는 커다란 영향을 미치지는 않았으나 더 넓은 영역에 걸쳐 분포하려는 특성을 보여주었다. 또한, ROA 비가 증가할수록 충돌중심점 근처에서 간섭의 영향은 작아짐을 중첩법을 이용하여 비교함으로서 잘 알 수 있었다.

• 대한한방소아과학회지
• /
• 제26권2호
• /
• pp.35-46
• /
• 2012

Objectives The purpose of this study was to find out the characteristics of children patients who had been treated in the Oriental Medical Hospital due to traffic accidents. Methods The study was carried out with 121 children patients who visited the Oriental Medical Hospital from April 2011 to March 2012 and was analyzed by reviewing the patients' charts. Results In the distribution of sex the ratio between boys and girls were similar, but regarding the age, 0~6 year-old group was more than that of 7~15 year-old group. In the traffic accident patterns, 87.6% of the entire children patients were injured by car crash. The highest type in the collision between cars was rear-ending impact. The most patients (48.8%) visited our hospital for oriental medical treatment in less than 3 days after the traffic accident. The number of the first visitors in the Oriental Medical Hospital were 77 (63.6%) and those who visited other western hospitals before and were 44 (36.4%). The most frequent duration of admission and treatment in OPD was less than 7 days. Sleeping disorders (37.1%) were diagnosed the highest in 0~6 year-old group and C-spine sprain (49.0%) was diagnosed the highest at 0~7 years-old group. Herb medications were prescribed to relieve anxiety for 0~6 year-old group and for 7~15 year-old group, those were prescribed to activate blood eliminating phlegm and to normalize Qi flow. The highest effective treatment period was less than 7 days. Conclusions This data suggested that the oriental medical care could be more effective in treating children victims of traffic accidents by confirming many different symptoms depending on the age.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권7호
• /
• pp.3309-3328
• /
• 2017

The application of Internet of Things (IoT) in the next generation cellular networks imposes a new characteristic on the data traffic, where a massive number of small packets need to be transmitted. In addition, some emerging IoT-based emergency services require a real-time data delivery within a few milliseconds, referring to as ultra-low latency transmission. However, current techniques cannot provide such a low latency in combination with a mice-flow traffic. In this paper, we propose a dynamic resource reservation schema based on an air-interface slicing scheme in the context of a massive number of sensors with emergency flows. The proposed schema can achieve an air-interface latency of a few milliseconds by means of allowing emergency flows to be transported through a dedicated radio connection with guaranteed network resources. In order to schedule the delay-sensitive flows immediately, dynamic resource updating, silence-probability based collision avoidance, and window-based re-transmission are introduced to combine with the frame-slotted Aloha protocol. To evaluate performance of the proposed schema, a probabilistic model is provided to derive the analytical results, which are compared with the numerical results from Monte-Carlo simulations.

• 한국항해항만학회지
• /
• 제38권6호
• /
• pp.689-694
• /
• 2014

The Korean government has introduced and enforced maritime traffic safety assessment to secure traffic safety since 2010. The maritime traffic safety assessment is needed by law to design a new port or modify an existing one. According to Korea Maritime Safety Act, in the assessment the propriety of marine traffic system consists of the safety of channel transit and berthing/unberthing maneuver, safety of mooring, and safety of marine traffic flow. The safety of channel transit and berthing/unberthing maneuver can be evaluated only by ship-handling simulation. The ship-handling simulation is carried out by sea pilots working with the port concerned. The vessel's proximity measure is an important factor to evaluate traffic safety. The proximity measure is composed of vessel's closest distance to channel boundary and probability of grounding/collision. What is more, the probability of grounding becomes important. According to central limit theorem, a sample has a normal distribution on condition that its size is more than 30. However, more than 30 simulation runs bring about the increase of assessment period and difficulty of employing sea pilots. Therefore this paper is to find out minimum sample size for evaluating vessel's proximity. First sample sets of size of 3, 5, 7, 9 etc. are selected randomly on the basis of normal distribution. And then KS test for goodness of fit and t-test for confidence interval are applied to each sample set. Finally this paper decides the minimum sample size. As a result this paper suggests the minimum sample size of 5, that is, the simulation of more than five times.

• 대한기계학회논문집B
• /
• 제36권8호
• /
• pp.849-855
• /
• 2012

대향류 버너에서 질소로 희석시킨 메탄 연료의 확산화염에 대하여 AC 전기장을 인가하여 전압크기 및 주파수 변화에 의한 영향을 실험적으로 조사하였다. 그 결과, 임계주파수를 초과하는 AC 주파수 영역에서 안정한 확산화염이 나타났으며, 인가된 AC 전압크기의 증가에 따라 그 임계주파수는 증가하다가 약 35Hz 로 일정한 값을 보였다. 반면에, 임계주파수 미만의 AC 주파수 영역에서, 그 확산화염은 인가된 AC 주파수에 동기되어 진동하였다. 화염지역 내에 양이온들은 로렌츠 힘에 의하여 가속되고, 그 양이온과 중성자 간의 분자단위의 충돌에 의한 운동량의 전달에 의해 전체적인 유동장의 변화가 발생하는데, 이러한 이온풍의 효과에 의하여 화염의 진동 현상이 나타날 수 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.218.1-218.1
• /
• 2014

In order to measure the absolute plasma density, various probes are proposed and investigated and microwave probes are widely used for its advantages (Insensitivity to thin non-conducting material deposited by processing plasmas, High reliability, Simple process for determination of plasma density, no complicate assumptions and so forth). There are representative microwave probes such as the cutoff probe, the hairpin probe, the impedance probe, the absorption probe and the plasma transmission probe. These probes utilize the microwave interactions with the plasma-sheath and inserted structure (probe), but frequency range used by each probe and specific mechanisms for determining the plasma density for each probe are different. In the recent studies, behaviors of each microwave probe with respect to the plasma parameters of the plasma density, the pressure (the collision frequency), and the sheath width is abundant and reasonably investigated, whereas relative diagnostic characteristics of the probes by a comparative study is insufficient in spite of importance for comprehensive applications of the probes. However, experimental comparative study suffers from spatially different plasma characteristics in the same discharge chamber, a low-reproducibility of ignited plasma for an uncertainty in external discharge parameters (the power, the pressure, the flow rate and so forth), impossibility of independently control of the density, the pressure, and the sheath width as well as expensive and complicate experimental setup. In this paper, various microwave probes are simulated by finite-different time-domain simulation and the error between the input plasma density in FDTD simulations and the measured that by the unique microwave spectrums of each probe is obtained under possible conditions of plasma density, pressure, and sheath width for general low-temperature plasmas. This result shows that the each probe has an optimum applicable plasma condition and reliability of plasma density measurement using the microwave probes can be improved by the complementary use of each probe.

• 한국재료학회지
• /
• 제26권11호
• /
• pp.611-622
• /
• 2016

Particle morphology change and different experimental condition analysis during composite fabrication process by traditional ball milling with discrete element method (DEM) simulation were investigated. A simulation of the three dimensional motion of balls in a traditional ball mill for research on the grinding mechanism was carried out by DEM simulation. We studied the motion of the balls, the ball behavior energy and velocity; the forces acting on the balls were calculated using traditional ball milling as simulated by DEM. The effect of the operational variables such as the rotational speed, ball material and size on the flow velocity, collision force and total impact energy were analyzed. The results showed that increased rotation speed with interaction impact energy between balls and balls, balls and pots and walls and balls. The rotation speed increases with an increase of the impact energy. Experiments were conducted to quantify the grinding performance under the same conditions. Furthermore, the results showed that ball motion affects the particle morphology, which changed from irregular type to plate type with increasing rotation speed. The evolution was also found to depend on the impact energy increase of the grinding media. These findings are useful to understand and optimize the particle motion and grinding behavior of traditional ball mills.

• 전자공학회논문지CI
• /
• 제45권1호
• /
• pp.55-61
• /
• 2008

실시간 삼차원 영상은 충돌 방지를 위한 수동 시스템을 포함하는 다양한 응용 분야에 활용될 수 있으며, 기존 능동 시스템에 대한 훌륭한 대안으로서 잡음이 많은 복잡한 환경에서 외부의 영향을 최소화 할 수 있는 장점이 있다. 본 논문에서는 하드웨어 자원 사용량에 주목하여 실시간 삼차원 영상을 위한 스테레오 비전 시스템의 최적화에 관한 연구를 진행하였다. SAD 알고리즘은 규칙적인 구조, 선형적인 데이터 흐름과 풍부한 병렬성을 가지므로 재구성 가능한 하드웨어에서 구현하기 위한 좋은 조건을 가지고 있다. HDL을 이용하여 SAD 정합연산기를 설계하고 하드웨어 자원 사용량과 성능을 확인하기 위해서 Xilinx를 사용하여 합성하였다. 실험을 통하여, 초당 30프레임을 실시간으로 처리할 수 있는 충분한 처리 속도를 가지고 있으며, 적은 자원은 사용하면서 높은 정합율을 보이는 SAD 정합연산기를 설계하였음을 확인하였다.

• 한국통신학회논문지
• /
• 제38C권2호
• /
• pp.165-171
• /
• 2013

차량 통신 프로토콜은 IEEE 802.11 WG과 P1609에서 진행하고 있는 WAVE(Wireless Access in Vehicular Environments)가 대표적이며, 보안 등을 제외한 MAC과 PHY에 대한 부분은 표준으로 제정되었다. 이러한 차량통신을 이용하여 운전자들의 안전과 전체 교통 흐름의 원활한 통제를 위해 국내외에서 많은 프로젝트가 진행되고 있다. 따라서 본 논문에서는 교차로에서 좌회전 시도 시에 위험 상황이 예상되면 운전자에게 알려주기 위한 차량간 통신 기반 안전서비스 알고리즘을 설계하였고, 이를 실제 구현하였다. 제안하는 알고리즘은 자차와 반대편에서의 접근차량에 대한 모델을 구성하고 충돌 위험이 있을 경우 운전자에게 HMI(Human Machine Interface)를 통해 경고를 주게 된다. 본 안전 서비스의 성능 테스트를 위해 테스트 차량을 이용하여 알고리즘을 시스템에 탑재하였으며, 테스트 케이스를 구성하여 성능 시험장에서 검증하였다. 테스트 결과로써, 우수한 성능을 나타냈으며, 앞으로 차량 통신 인프라가 설치된다면 V2I(Vehicle to Infrastructure) 통신을 이용하여 본 알고리즘을 보다 정밀하게 보완해야 할 것이다.