• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.70-70
• /
• 2003

• Journal of Acupuncture Research
• /
• 제17권1호
• /
• pp.175-187
• /
• 2000

PyoBon GeunGyul - one of the twelve regular meridians theory - play a important role on the principle of point selection and point prescription in acumoxibustion. PyoBon explain the connection of the concentration and diffusion of channel qi, GeunGyul explain the relation of both poles of channels flow. So, Geun and Bon means the starting point of channel qi, and Pyo and Gyul means the terminal point of channel qi. But the flow of channel qi on PyoBon GeunGyul different from today's circulation courses of twelve regular channels based on Kyungmaek(經脈) chapter of Youngchu. Thus this study investigate the contents of PyoBon GeunGyul and consider its connection with channel flow. The results are as follows : 1. PyoBon GeunGyul theory explain that the relation of the limbs and trunk at meridian and emphasize that the connection of meridian and the importance of the limb acupoints. 2. PyoBon GeunGyul theory can be understandable in the view of the primordial qi and explain that the primordial qi of twelve regular channels acts from the limbs to the trunk. 3. PyoBon GeunGyul theory is based on the system of primordial qi channel which circulates from fingers and toes facing toward heart or the head, different from today's circulation courses of twelve regular meridians. 4. PyoBon GeunGyul theory act as a basis of principle of a part or distant point selection which applicated widely in acumoxibustion.

• Korean Journal of Hydrosciences
• /
• 제5권
• /
• pp.1-16
• /
• 1994

In this paper distributed models for simulating spatially and temporally varied moving storm in a watershed were developed. The complete simulation in a watershed is achieved through two sequential flow simulations which are overland flow simulation and channel network flow simulation. Two dimensional continuity equation and momentum equation of kinematic approximation were used in the overland flow simulation. On the other hand, in the channel network simulation two types of governing equations which are one dimensional continuity and momentum equations between two adjacent sections in a channel, and continuity and energy equations at a channel junction were applied. The finite difference formulations were used in the channel network model. Macks Creek Experimental Watershed in Idaho, USA was selected as a target watershed and the moving storm on August 23, 1965, which continued from 3:30 P.M. to 5:30 P.M., was utilized. The rainfall intensity fo the moving storm in the watershed was temporally varied and the storm was continuously moved from one place to the other place in a watershed. Furthermore, runoff parameters, which are soil types, vegetation coverages, overland plane slopes, channel bed slopes and so on, are spatially varied. The good agreement between the hydrograph simulated using distributed models and the hydrograph observed by ARS are Shown. Also, the conservations of mass between upstreams and downstreams at channel junctions are well indicated and the wpatial and temporal vaiability in a watershed is well simulated using suggested distributed models.

• 한국산업융합학회 논문집
• /
• 제26권1호
• /
• pp.183-191
• /
• 2023

This study was conducted experimentally to investigate the surface temperature of the heat sink, the air temperature in the flow channel and the sample temperature by changing the channel number of channel type heat sink and the air flow rate when heating and cooling the bio sample. The target temperature of the sample was 15℃ or less as the minimum value and 82℃ or more as the maximum value. In this study, the channel number of the heat sink(N = 1, 2, 4, 5, 10) and the air flow rate(Q=25, 42, 54m³/min) were varied. The bio sample was replaced with water, and the volume of water is 4mL. The size of the heat sink is 80x73x150mm and the material is aluminum. When cooling the sample, the surface temperature, the air temperature and the sample temperature were highly dependent on the number of channels and the flow rate. However, when the sample is heated, the surface temperature, air temperature and sample temperature do not depend on the number of channels and the flow rate. It was found that the conditions for satisfying the minimum temperature of 15℃ or less when cooling the sample were the number of channels N≥5 and the flow rate Q≥42m³/min. When heating the sample, the conditions to satisfy the maximum temperature of 82℃ or more are the number of channels N≤5 and the air flow rate Q≤42m³/min.

• 대한토목학회논문집
• /
• 제29권3B호
• /
• pp.239-245
• /
• 2009

제방은 형태 및 구성이 중력댐과 유사한 수리구조물이나, 외력조건에서 중력댐과 다른 특성을 가진다. 제방은 제외지의 수위와 흐름의 영향을 복합적으로 받는 구조물로서 하천의 흐름조건을 무시한 기존 연구와 같이 침투 안전성 해석을 시행하는 것은 바람직하지 않다. 본 연구에서는 하천제방 주변의 흐름인 사다리꼴 개수로 흐름구조와 제외지 흐름이 제방침투에 미치는 영향을 분석하기 위한 실험을 수행하였다. 사다리꼴 개수로 흐름구조는 유속분포 및 바닥면 전단응력에 있어 직사각형 개수로 흐름과 상이하였다. 또한 유속이 0.5 m/s인 경우에 침투 수두는 흐름이 없는 경우와 비교하여 10%정도 크게 나타났다. 이러한 현상은 동수두, 이차류, 난류 변동성분에 의한 인자, 그리고 다양한 물리적 영향에 기인한다. 따라서 침투해석의 외력조건은 수위뿐만 아니라, 흐름에 의한 영향을 고려할 필요가 있다.

• 한국항공우주학회지
• /
• 제33권11호
• /
• pp.65-73
• /
• 2005

천음속 미교란 모델과 1단계 1차 Arrhenius 화학반응식을 이용하여 반응유체의 압축성 유동에 대하여 연구하였다. 유체 유동은 적은 열방출을 수반하는 희박 예혼합 반응에 국한시켰다. 천음속 연소에 끼치는 채널형상과 채널입구 마하수의 영향 등을 수치해석을 이용하여 조사하였다. 수치결과에서 채널확대는 주어진 채널길이 내에서 화학반응을 증가시키고 있음에 반하여 채널수축은 출구 근처에서 화학반응을 억제시키고 있음을 보여주고 있다. 확대형 채널 내에서 입구유동 마하수 증가는 고정된 반응속도에서 유동을 가속시켰으며 불활성 유체 경우에는 나타나지 않는 약한 충격파가 나타났다. 또한 확대형 채널 출구 근처의 압력과 온도를 증가시키고 주어진 채널길이 내에서 반응체의 소비를 도와준다.

• 한국가시화정보학회지
• /
• 제9권4호
• /
• pp.63-68
• /
• 2011

The flow-field of a liquid-metal system is very important for the safety analysis and the design of the steam generator of liquid-metal fast breeder reactor. Dynamic neutron radiography (DNR) is suitable for a visualization and measurement of a liquid metal flow and a two-phase flow in a metallic duct. However, the three dimensional DNR techniques is not enough to obtain the velocity information in the wide channel up to now. In this research, a high speed DNR technique was applied to visualize the heavy liquid-metal flow field in the narrow channel with the HANARO-beam facility. The images were taken with a high frame-rate neutron radiography at 250 fps and analyzed with a Particle Image Velocimetry(PIV) method. The images were compared with the results of the commercial CFX code to study the feasibility of DNR technique for the measuring the heavy liquid-metal flow field. The PIV images could discern the turbulent vortex flow in the two-dimensional narrow channel.

• 설비공학논문집
• /
• 제14권7호
• /
• pp.592-598
• /
• 2002

The characteristics of a pulsating flow field from a heated block representing heat-dissipating electronic component in a channel have been numerically investigated. At the channel inlet a pulsating sinusoidal flow is imposed. The Reynolds number based on the channel height (H) is fixed at Re=500, and the forcing frequency is varied in the range of $0\leqSt\leq2$. Numerical results on the time-dependent flow field are obtained and averaged over a cycle of pulsation. The effect of the important governing parameters such as the Strouhal number is investigated in detail. The results indicate that the recirculating flow behind the block is substantially affected by the pulsation frequency. To characterize the periodic vortex shedding due to the inflow pulsation, numerical flow visualizations are carried out.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.178-184
• /
• 2005

The present study investigates the effects of bleed flow on heat/mass transfer and pressure drop in a rotating channel with transverse rib turbulators. The hydraulic diameter ($D_h$) of the square channel is 40.0 mm. The bleed holes are located between the rib turburators on leading surface and the hole diameter (d) is 4.5 mm. The square rib turbulators are installed on both leading and trailing surfaces. The rib-to-rib pitch is 10.0 times of the rib height (e) and the rib height-to-hydraulic diameter ratio ($e/D_h$) is 0.055. The tests were conducted at various rotation numbers (0, 0.2, 0.4), while the Reynolds number and the rate of bleed flow to main flow were fixed at 10,000 and 10%, respectively. The results suggest that the heat/mass transfer characteristics in the internal cooling passage are influenced by rib turbulators, bleed flow and the Cariolis force induced by rotation. For the rotating ribbed passage with bleed flow, the heat/mass transfer on the leading surface is hardly affected by bleed flow, but that on the trailing surface decreases due to the diminution of main flow. The results also show that the friction factor decreases with the bleed flow.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.193-198
• /
• 2003

A gas turbine blade has an internal cooling passage equipped with ribs, which can be modeled as a ribbed channel. We have studied a flow inside a ribbed channel using large eddy simulaton (LES) with a dynamic subgrid-scale model. The simulation results are compared with the experimental ones. The turbulence intensity and local heat transfer near the rib have not been well captured by the conventional Reynolds averaged Navier-Stokes simulation (RANS). However, these variables obtained by the present LES agree well with those from experiments. From the instantaneous velocity and temperature fields, we explain the mechanisms responsible for the local peaks in the heat transfer distribution along the channel wall. We have also investigated the effect of rotation on the flow and heat transfer in the ribbed channel.