• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1002-1007
• /
• 2008

The floor structure of railway vehicle can deflect and warp due to variation of temperature and humidity at the inside and outside of vehicle. In this study, its temperature and humidity characteristics was investigated experimentally for beam and plate specimen and numerically for the floor structure assembly. The temperature and humidity characteristics of a part were measured and the deformation and stress distribution of the floor structure were calculated using a commercial software. And the warp deformation of the plywood was measured experimentally. The results show that the temperature and humidity effects on the floor structure are the important factor to decide the strength and the quality of the floor structure of railway vehicles.

• 한국기계기술학회지
• /
• 제13권3호
• /
• pp.93-98
• /
• 2011

To analyze and evaluate the performance of developing air to water multi heat pump, the heat pump was installed and tested at low energy house in Daejeon, korea. Heating capacity of heat pump is 16.5KW and cooling capacity is 14.0KW. Space heating/cooling, floor heating and hot water is available. The results performance evaluation of heat pump in lab test showed that the coefficient of performance (cop) was 3.75, and heating capacity was 16.0KW in ambient temperature $7^{\circ}C$. Also at ambient temperature $-15^{\circ}C$, the COP was 1.69. At a low energy house, floor heating is controled by a floor heating water temperature and a room temperature. The COP of heat pump is decreased with frequent on/off operation for controlling of floor heating water temperature.

• 한국태양에너지학회 논문집
• /
• 제28권6호
• /
• pp.48-57
• /
• 2008

The research analyzed the distribution of the indoor temperatures of a radiant floor cooling system through mock-up experiments. It investigated the temperature difference of feed water, the vertical temperature difference of indoor air, the temperature difference of floor surface, and so on. The following is the results of the research. First, the research shows that the difference between indoor temperature and outside temperature was the smallest when the temperature of feed water was set at 16$^{\circ}C$. In addition, the temperature changes according to indoor positions (wall, room, floor, and ceiling) were the most uniform. Thus, the research found that the cold water temperature of 16$^{\circ}C$ is the most proper. In addition, it confirmed that the feed water temperature of 18$^{\circ}C$ is effective because the temperature can lower the temperature of a room to 13.55$^{\circ}C$, which is lower than the temperature of a non-cooling mode. Second, an investigation on the temperature distribution of vertical air in indoor space shows that the temperature distribution had a difference of 0.2 to 1.9$^{\circ}C$ on the average, which satisfies the range of 3.0$^{\circ}C$ in the standard of ISO.

• 신재생에너지
• /
• 제5권4호
• /
• pp.60-65
• /
• 2009

The present study was conducted for a comparative evaluation of wet and dry floor heating systems using geothermal heat pump. We circulated hot water from geothermal heat pump which is $10{\sim}15^{\circ}C$ lower than that from boiler. In order to access indoor temperature ($25^{\circ}C$) it took 74 minutes for dry type and 247 minutes for wet type. Average floor temperature was $23.9^{\circ}C$ for wet type and $32.7^{\circ}C$ for dry type. Energy saving rate gradually increased by 66% after 138 minutes. As a result, in case of floor heating system using low temperature circulation water, dry type was more practicable for stable floor heating than wet type in terms of floor temperature and access time to indoor set temperature.

• 설비공학논문집
• /
• 제30권2호
• /
• pp.68-82
• /
• 2018

Radiant floor heating systems with capillary tubes are energy saving systems in which hot water is circulated into capillary tube with a small diameter. In this study, the heating performance of capillary tube system is investigated in an experimental study and a simulation model. The results of the study showed that, the capillary tube radiant floor heating system maintains a more stable floor surface temperature in comparison a PB pipe system. In terms of energy consumption, the capillary tube radiant floor heating system proved to be more efficient than the PB pipe heating system at $40^{\circ}C$ of low temperature hot water supply. The difference between water temperature and room temperature can be held low for heating which saves energy. Low temperature radiant floor heating system with capillary tubes have significant advantages such as health improvement, low energy cost, optimum use of heat source(boiler) and higher operational efficiency.

• 설비공학논문집
• /
• 제8권3호
• /
• pp.317-329
• /
• 1996

By describing the floor slab of a radiant heating system as a one dimensional transient heat exchanger problem, a dynamic analysis model to incorperate with TRNSYS program was developed and their results were compared with experimental results. Results showed that the both of TPOC(Two Parameter On-off Control) and TPSC(Two Parameter Switching Control) method using room air temperature and floor surface temperature as the control parameters does not maintain room air and floor surface temperature exactly at the setting temperatures. But TPSC method is a better candidate for the temperature regulations of room air and floor surface temperature than TPOC method which can keep on the upper and lower limit temperature according to outside temeperature and wall structure etc. And better thermal circumstance can be given by TPSC method than On-off and TPOC method and the overheating which can be occured at the radiant floor heating system with on-off heating control will be reduced.

• 설비공학논문집
• /
• 제14권7호
• /
• pp.607-616
• /
• 2002

This study has been conducted to evaluate the applicability of the control method in the dehumidification-integrated radiant floor cooling system in terms of stability of the room air temperature and the control variables through experiments. To do this, the relationship between the control variables in preventing floor surface condensation is first analyzed and the control method is predetermined through simulations. The results are as follows. First, it is necessary to determine the operation status of the dehumidification system according to the relationship between floor surface temperature and dew point temperature in the conditioned space. Second, outdoor reset with indoor temperature feedback control is better than on/off bang-bang control with respect to temperature stability in controlling the room air temperature and the possibility of energy savings. Finally, the humidity sensor can be located with the current thermostat in that there are small differences in absolute humidity in vertical distribution.

• 농업생명과학연구
• /
• 제46권1호
• /
• pp.29-34
• /
• 2012

소나무 톱밥보드로 제조된 우드세라믹에 전선을 연결하여 목재 틀과 콘크리트 블록 속에 넣고 통전하여 강화마루판과 합판마루판의 표면온도 상승과 하강변화를 조사 하여 우드세라믹을 온돌마루판 하부소재로 이용할수 있는 가능성을 검토하였다. 통전시간 60분 후 마루판의 표면온도와 처음 시작온도 차이는 강화마루판이 크게 나타나 합판마루판보다 열전달이 빠름을 알 수 있었다. 목재 틀에서 우드세라믹 표면설정온도가 $70^{\circ}C$와 $80^{\circ}C$일 때 60분 후 강화마루판의 표면온도는 각각 $37.8^{\circ}C$와 $39.4^{\circ}C$로 높게 나타나 열전달이 우수하였다. 각 우드세라믹 표면설정온도별 처음 시작온도와 30분후의 표면온도 하강차이는 목재 틀이 콘크리트 블록보다, 강화마루판이 합판마루판보다 커서 온도하강이 빠름을 알 수 있었다. 우드세라믹 자체의 표면온도 하강은 목재 틀보다 콘크리트 블럭에서 하강속도가 빨랐으며, 마루판의 하강속도가 우드세라믹의 하강속도보다 느려 마루판이 오랜 시간 열을 유지하고 있음을 알 수 있었다.

• 한국의류학회지
• /
• 제22권8호
• /
• pp.1020-1031
• /
• 1998

This study was done to investigate thermal reponses and to obtain the basic information of thermal comfort by sex and posture under the Ondol heating system. Six healthy males and females were exposed to Ondol(Room Temp.: 25$\pm$1$^{\circ}C$, 50$\pm$10%R.H, Floor Temp.:30$\pm$1$^{\circ}C$) on the of posture such as sitting, lying aside and supine on the floor for 30 minutes after 30 minutes' control phase. During the experiment, rectal temperature, skin temperature of 10 areas, local sweating rate, clothing microclimate, subjective sensation were measured. Rectal temperature gradually decreased and mean skin temperature grad-ually increased both male and female in any posture. There was not significant difference between male and female in rectal temperature and mean skin temperature. There were significant difference among the postures in rectal temperature(p<0.001) and mean skin temperature(p<0.001). In lying aside and supine on the floor, appearances of change and changes in rectal temperature and mean skin temperature were large, changes of weight were small. In sitting on the floor, appearances of change and changes in rectal temperature and mean skin temperature were small, changes of weight were large. The trunk skin tem-perature was higher in female than in male, but the extremity skin temperature was higher in male than in female. In sitting on the floor, foot skin temperature(p<0.001) was higher than any other local skin temperature. In supine on the floor, back skin temperature(p<0.001) was higher than any other local skin temperature.

• 한국산업정보학회논문지
• /
• 제28권6호
• /
• pp.83-90
• /
• 2023

냉동컨테이너는 외부 환경에 의해 냉동기가 있는 적재부의 전면과 컨테이너 문이 있는 적재부의 후면부 사이에 온도 편차가 발생한다. 특히, 신선화물 운송에서 이러한 온도 편차는 화물의 신선도에 큰 영향을 미치게 된다. 본 연구에서는 온도 편차를 줄이기 위해 T-Floor를 부분적으로 차폐하고, T-Floor 차폐율이 냉동컨테이너 적재부 온도 변화에 미치는 영향을 평가하여 온도 편차를 최소화하는 방법을 제안한다. 실험 대상은 40 feet 스마트 냉동컨테이너로 T-Floor 차폐율은 0%, 50%, 60%, 70%, 80%로 설계 변수를 설정하였다. 실험 결과, 차폐율에 따라 냉동컨테이너 적재부의 온도 편차가 다르게 발생하였으며, 차폐율 60%인 경우 온도 편차가 가장 균일한 것을 확인했다. 이러한 적재부 온도 편차 최소화를 통해 스마트 냉동컨테이너를 이용하여 신선 화물의 운송 시 화물의 부패 및 냉해를 예방할 수 있다.