• Journal of The Korea Institute of Healthcare Architecture
• /
• v.25 no.1
• /
• pp.41-49
• /
• 2019

Purpose: After Mers breakout in 2015, major hospital in Korea have been renovated the emergency department to make a separate infection control zone for high-risk patient with potential infection and to improve a triage area and an entrance area for efficient patient evaluation. However, there are no specific design standards to reinforce infection control for patients and staffs safety. Therefore, it is important to establish of initial design factors in the triage and entrance area as a guideline. Methods: 5 cases which had been recently renovated are selected to analyze patient circulation and spatial composition in a triage area and an entrance area. The partial floor plans of each case are represented as bubble diagrams to help understanding of different patient circulation flows. Based on this analysis, significant design factors which should be considered in planning stage for infection control have been extracted. Results: 13 design factors are established. Using these design factors, patient circulation diagram is generated to provide an optimized suggestion for efficient infection control. Implications: This suggestion provides basic databases to start to establish design guideline in the triage area and the entrance area to minimize infection spreading in the emergency department.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.2
• /
• pp.107-118
• /
• 2018

A primary objective the Conjoint Building Program(CBP), as articulated in the legislation proceedings as to stimulate renewal and regeneration of old deteriorated districts. By allowing the transfer of development rights between two lots located within 100m radius or the same block surrounded by 12m wide streets, CBP encourages reconstruction of old buildings with low investment value by linking it to another lot that can buy its unused floor area ration. Most of the debates and studies prior to the introduction of the new legislation focused on possible abuse in financial terms, and little research has been done to illustrate possible merits of deficiencies in term of urban morphological influences. This study offers a visual prediction of the various ways CBP can influence an urban block by reshaping and reorganizing it thrown augmented development rights to assess the pros and cons of the current program.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.7
• /
• pp.59-68
• /
• 2018

Salk Institute for Biological studies is widely considered as architectural masterpiece of Louis Kahn's. Its iconic plaza with symmetrical concrete structures, overlooking the Pacific ocean in La Jolla, has been acclaimed as a facade to the sky. Little has been written on Kahn's achievements in the building system integration in order to bridge the gap between technology and design. This paper explores the technical issues, the design intents, and the major building systems to identify the Kahn's integration methods between building systems. The project is analysed into four major systems; structure, mechanical, envelope, and interior system. The integration methods of building systems are investigated in physical, visual, and functional aspects. The most distinguished cases of building system integration are the introduction of the interstitial floors between the laboratories and the creation of the smooth and warm materiality of exposed concrete walls. Kahn proposed open floor plans for the laboratories which are capable of easily adapting to changing needs. He also introduced the interstitial floors which are framed of the vierendeel truss systems and deliberately overlapped the structure systems with the mechanical systems such as ducts, water pipes, and electric conduits. The exposed concrete walls mixed with pozzolan ashes look very much like granite or limestone as the result of the physical and visual integration between structure, envelope, and interior systems.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.4
• /
• pp.37-44
• /
• 2019

According to the statistical surveys and studies, insufficient maintenance in the use of existing buildings caused fire and collapse accidents. In this respect, I analyzed the data managed by the current building maintenance and inspection system to find out the actual state of safety management and proposed two significant results. First, regarding the state of the buildings, the safety management status of the small-sized ones, where 20 years or more passed after construction, is the worst and a priority improvement plan is required. Second, there are eight deeply concerning factors for the fire incidents and collapse accidents of buildings. In the order of high risk, these factors are structural strength (seismic design), exterior wall finishing material, basement floor, interior finishing materials, other evacuation facilities, corridors stairs entrances, rooftop, fire partition. We need to have more special designs and management plans regarding high-risk factors as a system to prevent accidents in the building.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.8
• /
• pp.73-79
• /
• 2019

The purpose of this study is to analyze the stress variation according to Hitler's residence using EEG data. Hitler's residence, one of the most monumental buildings, is designed as a grand and overbearing space, giving the visitor a sense of psychological pressure when moving from a high space to low space. Based on the above background, this paper constructs Hitler's residence using virtual reality and measure the changes of the beta waves which are known to be related with stress when the floor level moves from high to low space in Hitler's residence built in virtual space. The results of the experiment are as follows; when moving from high to low space, the subjects' stress was high and at the same time brain waves variation was increased greatly due to changes in space.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.10
• /
• pp.63-70
• /
• 2019

The Busan branch of the former Toyo Takushoku Co. carried out the same business as a bank at the time of construction. This required an open space of long-span, which had no pillars, on the first floor where many customers frequently visited. In addition, an office space is required in the upper part, and a column is arranged so as to place a corridor in the center. It was designed with modern complex structures for space utilization and structural adaptation. As a result, scientific structural calculations of the modern era began and various structural technologies were introduced, the rationalization and value of various spatial characteristics and their structural design were analyzed from a technical historical perspective in the structure requiring long-span space. The Busan branch of the former Toyo Takushoku Co. is a complex structure with three structures. It is highly valuable as a building that tried to design its structure in a variety of spaces through calculation and introduction of new technology based on the principle of force in modern times.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.36 no.4
• /
• pp.83-92
• /
• 2020

The purpose of this study is to develop a publicness evaluation index for indoor privately owned public spaces (POPS). In order to develop the index, 10 cases of indoor POPS in New York City were analyzed using Visibility Graph Analysis by evaluating its accessibility and visual openness. The results are as follows; (1) Accessibility and openness of indoor POPS were higher compared to other public spaces on the first floor. (2) Cases with high accessibility index installed a higher number of entrances. (3) Cases with high openness index were mostly composed of a glass wall. (4) The publicness index was high when the lobby and the indoor POPS are shared. (5) Atrium types were highly utilized and the evaluation index was also high whereas, linear types were less utilized and the evaluation index was lower.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.21 no.4
• /
• pp.139-146
• /
• 2019

The purpose of this study is to propose the building design guideline considering photovoltaic panel installation through the analysis of relevant guidelines from home and abroad in terms of building design and solar panel installation. Conclusions can be summarized as followings; Considerations in building design : selection of the site with high solar accessibility, avoidance of the shade from the adjacent building & trees, south facing orientation of solar panel in building design, removal of shade on the solar panel from the part of building itself, load consideration of solar panel & fixing materials, safe passage securement for solar system maintenance, and planning of piping and mechanical room for solar system. Considerations in solar panel installation : harmonizing of solar panel with surrounding environment, unity of solar panel orientation & slope, regular maintenance of solar system, (in case of flat roof installation) solar panel installation afloat over the roof, installation area within the roof floor, and lower than parapet height, (in case of sloped roof installation) solar panel installation parallel with the roof slope, ventilation space securement below the panel, installation area within the roof surface, and similar material installation in empty space.

• The Journal of Korea Robotics Society
• /
• v.19 no.3
• /
• pp.311-317
• /
• 2024

Large-scale three-wheeled cleaning robots are utilized to clean large spaces such as warehouses and manufacturing plants where significant floor contamination occurs. Although there are autonomous cleaning robots, user-operated cleaning robots are often preferred because they are easy to repair and inexpensive. Therefore, workers have to spend extra time on cleaning, which reduces work efficiency. In this paper, we propose an autonomous driving system designed to automate the operation while maintaining the structure of existing cleaning robots. The contributions of this paper are as follows: 1) Hardware modules that control the driving and steering components. 2) A LiDAR-based autonomous driving system and path point generation system considering the mechanical characteristics of the cleaning robot. 3) The proposed system is implemented on an actual cleaning robot and driving tests are performed. As a result, when path planning is performed to cover the cleaning area, the average RMSE for each straight path is 0.0802 m, which is smaller than the minimum cleaning overlap of 0.3 m that occurs during the straight cleaning of the robot. This shows that the proposed system effectively covers the entire cleaning area.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.1
• /
• pp.40-50
• /
• 2016

A BIM, which is being applied actively to the construction and civil construction industries, is a technology that can maximize efficiency of various sectors from initial planning and design, construction, and maintenance, to demolition; however, it is in the introductory phase in the field of domestic landscaping. In order to introduce and promote BIM in the field of landscape design, this study developed a prototype of a library and template and analyzed the performance of trial application. For the development of a prototype, annotations and types were analyzed from floor plans of existing small parks, and components of landscape template were deduced. Based on this, play facilities, pergola, and benches were madeintofamily and templates, making automatic design possible. In addition, annotations and tags that are often used in landscape design were made, and a 3D view was materialized through visibility/graphic reassignment. As for tables and quantities, boundary stone table, mounding table, summary sheet of quantities, table of contents, and summary sheet of packaging quantities were grouped and connected with floor plans; regarding landscaping trees, classification criteria and name of trees that are suitable for domestic situations were applied. A landscape template was created to enable the library file format(rfa) that can be mounted on a building with BIM programs. As for problems that arose after the trial application of the prepared template, some CAD files could not be imported; also, while writing tables, the basis of calculation could not be made automatically. Regarding this, it is thought that functions of a BIM program and template need improvement.