• KIEAE Journal
• /
• v.11 no.5
• /
• pp.107-117
• /
• 2011

This paper aims to analyze architectural planning factors that could contribute to reductions in electricity consumption in the household of apartments, to apply energy saving methods at the design phase. These six architectural planning factors were orientation, building type (flat, tower block), standard floor access type (corridor access type, stair case type, EV hall access type), household location (floor), household opening type (one side opening, right angle opening, two sides opening or three sides opening), and bay on the facade (one bay, two bays, three bays, four bays), and these were derived from literature review. Household electricity consumption data were gathered from 2168 households with a total area of 135~150$m^2$ of 6 apartment complexes over 1000 households in Seoul. The annual characteristics of electricity consumption according to architectural planning factors were analyzed. And, variances between groups with respect to the mean of summer, winter, and annual electricity consumption according to each architectural planning factors were analyzed using ANOVA and t-test. The results showed that an annual electric energy saving of over 1000kWh was facilitated by these planning factors. In addition, high energy efficiency architectural planning factors based on the analysis were as follows: southwest orientation, flat type, corridor access type and staircase type, household loation below the 20th floor, two sides opening and three sides opening, and 2 bays and 3 bays.

• Journal of Korean Society of Rural Planning
• /
• v.11 no.3 s.28
• /
• pp.53-57
• /
• 2005

Up to recently building are constructed focusing on the convenience of residential condition. However, environmental-friendly materials is required for construction as people are spending more time inside buildings and causes of many problems like sick-building syndrome are known due to the noxious gases and polluted air originated from construction materials. Although loess(hwangtoh) is an environmental-friendly material, it has limitations in compressive strength far a construction material. The purpose of this study is to suggest the optimal ratio of loess(hwangtoh) mortar by tests of compressive strength comparing with standard strength of floor finishing mortar and evaluate the usability of loess(hwangtoh) mortar for floor finishing material through an impact test, a cracking test and a abrasion test. Based on the results of this study, 86% of loess(hwangtoh) and 14% of inorganic binder is suggested for the optimal mixture ratio of loess(hwangtoh) mortar. Moreover, the characteristics of loess(hwangtoh) is suitable for floor finishing material in impact, crack, abrasion.

• Korean Institute of Interior Design Journal
• /
• v.21 no.6
• /
• pp.54-61
• /
• 2012

The aim of this study is to understand the plan characteristics used in unit floor planning mainly with examples of mixed-use residential tall buildings. The study will extract plan characteristics mainly using the graph expressive technique with essential information of the zoning function of residential space, rather than merely analyzing the various construction floor plans by type. The research method involves studying a group of 50-story buildings (over 200 meters) which were built between 2002 and 2008. Among 6 high-rise residential buildings case, we extract the most preferred type from 34 types, And then we simply classify rooms in 3 zoning, the master, living and children's zones. Finally we analyze the correlation among 3 simple zone and then extract some model type. The results of this study revealed three main findings. First, using the 3 functional zones, the shape of the main building and the unit floor plan can be analyzed simply even when they appear to be complicated. Second, we can extract common features when we analyze the unit floor plan from the viewpoint of the penetrability among 3 zoning. Third, we can extract 2 types when we analyze the unit floor plan from the viewpoint of 3 connected functional zoning concepts.

• Journal of the Korean Institute of Rural Architecture
• /
• v.3 no.2
• /
• pp.49-56
• /
• 2001

The purpose of this study is to provide a practical guide for optimum residential and useful architectural condition in a regional area. The data has been collected through survey from exist Housing of a Go-sung Gun Toa-Sung Mun area. Those 21 Housing samples are collected, and are analyzed by standard Architectural codes, country Architectural codes and regulations This study has been processed in analysis of the unit planning and codes condition of each housings, and situation analysis through the practical investing. As a results of this study, the Housing floor plan in rural area should reflect user's needs and functional unit plan. Especially, the unit planning have a good residental environments. An instance, laundry and balcony space. These result will become basic data for the future architectural design in the Housing floor plan in rural area.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.12
• /
• pp.103-112
• /
• 2018

High-rise mixed-use buildings are consisted of various facilities and circulations. Since various facilities and circulations are planned in a single site, circulation planning should be established after identifying the exact characteristics of facility and circulation. To this end, the components of the circulation planning in accordance with the formation of facility types are analyzed through the survey of experts based on Delphi Method. To identify the characteristics of the mixed-use buildings, by figuring out how the elements of circulation planning which are sought to be important by the planner has been reflected through analysis of the correlation between two sections. Researching on the circulation between two sections through Delphi Method and reflected circulation planning, it reaches the conclusion that the circulation of planning on the subject building is applied following the importance. In other words, the components of circulation planning which were sought to be important by the planner are reflected significantly when they planned the circulation planning on that mixed-use buildings. However, in case of design on the outdoor vehicle circulation, minimizing on the vehicle circulation at the 1st floor is not applied for the majority of the subject buildings different from the importance. In early 2000, high end residential buildings designed for mixed-use building have been specialized at vehicle-centered outdoor space and hotel style drop-off. Contrastively, sizable outdoor space at the 1st floor is designed to open to the residents and the local by minimizing the vehicle circulation in recent. Finally it shows that the way of circulation planning has been changed in accordance with time and trend.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.3 no.5
• /
• pp.79-85
• /
• 1997

This study aims at evaluating the spatial configuration of general hospitals in terms of Visitors' movement pattern. In doing so, the study deals with three hospitals which are recently built and are generally considered to show recent trends in their spatial configuration. First, the Space Syntax method is used in order to systematically describe and analyse the spatial configurations, and thus to find out the spatial characteristics of each hospital in terms of movement pattern. Second, the spatial characteristics reflected on the 1st floor plan are compared with the planning concepts considered at early stage of the design. It can be said that the concept of hospital street and the spatial hierarchy should be carefully taken into account and tested the spatial configuration by the completed floor plan in order to satisfy the planning concepts.

• Journal of the Korean Institute of Educational Facilities
• /
• v.14 no.4
• /
• pp.86-95
• /
• 2007

This study clarifies the theoretical background and the floor plan characteristics of component schools in Small Schools Complexes. The recent researches have proved the enhancement of students' social relationship and school security in the new school environment. The findings fur the characteristics by analyzing the component schools from six school complexes follow: (1) Students can access their classrooms in component schools through main entrances, shared corridors and private corridors. (2) Teachers' area is segregated from students' area, which does not encourage the social relationship between teachers and students. (3) Some of special classrooms, which are generally considered as shared facilities in a Small Schools Complex, are planned within component schools for accommodating specialized educational programs. (4) A component school occupying multiple floors reduces Intelligibility of space and chances of users' visual contact to colleagues. Finally, this study proposed the alternative floor planning directions in order to improve users' social relationship in a component school.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.135-138
• /
• 2000

This paper is intended to propose what manufacturing configuration (manufacturing planning and shop floor control) is suitable for the tire industry. Basically tire-manufacturing process is mixed-products, parallel-disconnected-flow-shop. Both throughput time and cycle tine are very short, the variety of tires is very high, the setup time is long, shop floor data reporting requirements is high, and there are many equipments and people working. And with no exception, tire industry also now confronts increasing requirements of delivery conformance with the above peculiar characteristics of tire manufacturing and changing market environments, this paper suggests, weekly master scheduling with no MRP is desirable and traditional kanban is right selection for shop floor control/scheduling. This paper describes why this configuration should be, using the manufacturing engineering principles and some new insights like four primitives of parallel flow shop. Generally known that shop with high parallel-product-mix and long setup time isn't good candidate for kanban. The four primitives of parallel flow shop explain why kanban is also useful scheduling technique in that environment.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.21 no.3
• /
• pp.69-77
• /
• 2015

Purpose: Under a trend of hospitals that repeated expansion in line with fast increasing factors of medical demands in the past, medical buildings where clinic businesses have regularly gathered in one building have exponentially increased since separation of prescribing and dispensing in 2000. Thus, this study aims at analyzing characteristics of architectural plan of the current medical buildings, identifying strengths and weaknesses through Post Occupancy Evaluation and suggesting an architectural planning method of medical buildings to be planned in the future. Methods: Scope of study has been limited to 23 medical buildings that are registered in the building register as medical buildings out of the Class 1 neighborhood facilities build as 5 floors or more in Cheongju region since 2000 and being actually used for the usage. Study method is to define concepts of the medical buildings through literature review and advanced researches, analyze characteristics of architectural plan through drawing analysis and site survey. Results: General characteristics of architectural plans for the medical buildings in Cheongju have been analyzed. There are the most frequencies in general commercial area and semi-residential area, most of them are reinforced concrete structure and the Class 1 neighborhood facilities. Average land area is $482.68m^2$, gross floor area $3720.8m^2$, the number of underground floors level 1.16, the number of floors level 7.76, total number of floors 8.92, the building-to-land ratio 67.28%, floor area ratio 452.6%, height 31.44m, and the number of parked vehicles 24.16. Implications: This research will contribute to the establishment of the planning methods which increase the quality of Medical Buildings in Cheongju.

• Journal of the Korean housing association
• /
• v.24 no.4
• /
• pp.61-73
• /
• 2013

The purpose of this study is to provide information needed to the construction of the co-housing in the urban area. This study focused on the characteristics of co-housing in its planning process of private house & common space; 'economy', 'creativity' & 'sociality'. The object of this study is co-housing in 'Seongmi-san Village' in Seoul, which was built by a coordination company with residents' participation. The methods are investigating interview materials, floor plans of 9 households, & common space plans produced in the coordination process from the basic plan of private house & common space to the final plan. The results are as follows. 1) The size and plan of private house differed from each other. The water pipe location differed from each floor, so that there were difficulties in construction. In conclusion, these made no 'economy', but brought high 'creativity'. 2) The 'sociality' would be estimated as high because there were various types of resident participation; resident interviews on the planning, workshops for private housing plan, and workshops for common space.