• 한국강구조학회 논문집
• /
• 제13권4호
• /
• pp.373-380
• /
• 2001

본 연구에서는 벽 패널의 부분 합성거동 해석에 대하여 거론한다. 기 발표된 목재 바닥 시스템으로부터 유도된 처짐공식을 소개하고, 이 공식을 적용하여 석고보드와 강재 샛기둥으로 결합된 합성벽 패널의 중앙지점 처짐값을 산정한다. 나사연결부의 불완전성(미끄럼), 국부좌굴, 샛기둥 복부의 개구부, 그리고 인접 석고보드간의 불연속으로 야기 될 수 있는 강성의 감소 등을 처짐공식에 적절히 반영하는데 그 목적을 두었다. 적용된 처짐공식으로 산정된 처짐 기대치와 실험 관측치간의 비교에서는, 나사연결부의 상한 강성치를 사용한 처짐 기대치가 실험 관측치와 가장 근접한 결과를 보였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 추계 학술대회논문집
• /
• pp.227-231
• /
• 2007

COMS (Communication, Ocean and Meteorological Satellite) is a geostationary satellite and has been developing by KARI for communication and ocean and meteorological observations. It will be launched by ARIANE 5. Ka-band components are installed on South panel, where single solar array wing is mounted. Radiators, embedded heat pipes, external heat pipe, insulation blankets and heaters are utilized for the thermal control of the satellite. The Ka-band payload section is divided several areas based on unit operating temperature in order to optimize radiator area and maximize heat rejection capability. Other equipment for sensors and bus are installed on North panel. The ocean and meteorological sensors are installed on optical benches on the top floor to decouple thermally from the satellite. During the transfer orbit operation, satellite will be under severe thermal environments due to low dissipation of components, satellite attitudes and LAE(Liquid Apogee Engine) firing. This paper presents temperature and heater power prediction and validation of thermal control design during transfer orbit operation.

• 태양에너지
• /
• 제18권4호
• /
• pp.11-22
• /
• 1998

Floor panel heating system using hot water is the primary heating system of domestic residential building. This paper presents the results of performance analysis of the heat pump system with air source evaporator and single unit dual sink(SUDSk) condenser. The heat exchanger combines two separated condensers into a single condenser and the object of the SUDSk condenser is to release energy to dual sinks, i.e. air for air heating system and water for panel heating system in one single unit. Simulation program is developed for single unit dual source(SUDS) SUDSk heat pump system and some experimental data are obtained and compared with simulation results. Differences of heating capacity and COP in dual source operating mode are 7% and 8% respectively. Simulation results are in good agreement with test results. Therefore, developed program is effectively used for design and performance prediction of dual source dual sink heat pump system with SUDS evaporator and SUDSk condenser.

• 대한설비공학회지:설비저널
• /
• 제14권3호
• /
• pp.187-199
• /
• 1985

The low-temperatured radiant heating System like a panel heating system is recognized as nice means to make comfortable indoor environment. Perhaps, 'Ondol' would be a typical example of the Panel heating system. Nevertheless. Occupants in a radiantly heated Space which has an asymmetric radiant field may feel thermally discomfort due to the asymmetric radiation. The aim of this Study is to suggest the fundamental technical data for establishing Standards of thermally comfortable environment when designing a radiant heating System. Thermal distribution of indoor environment and the skin temperature of the occupants were measured at experimental room in KIER (Korea Institute of Energy and Resources). Whole/Regional thermal and comfort Sensation votes of the occupants were taken simultaneously in order to investigate the relationships between thermal environmental factor and the occupants' responses. The effect of an asymmetric radiation on thermal environment and the occupants' responses was analyzed by using a v.r.t.(vector radiant temperature). By this means, the thermally neutral limits for the ambient air temperature and the floor surface temperature by the occupants' responses were Obtained. And the recommended temperature limits of the indoor surface were derived from the experimental work and the theory of radiant and will provide thermal neutrality for man without any discomfort on the part of the body.

• 한국가금학회지
• /
• 제44권1호
• /
• pp.11-18
• /
• 2017

본 연구는 국내 산란계 동물복지 인증농가의 사육시설 및 사육형태에 따른 기초 사료를 수집하기 위해 수행하였다. 조사를 위하여 동물복지 인증을 받은 64농가에 설문지를 발송하였으며, 이 중 20농가(31.3%)에서 설문지가 회수되었다. 20농가의 사육시설별 현황은 보온덮개계사, 자연농법계사, 판넬철골조계사가 각각 4농가(20%), 7농가(35%), 9농가(45%)였으며, 사육밀도별 현황은 2~3수/$m^2$ 2농가, 4~5수/$m^2$ 10농가, 6~7수/$m^2$ 8농가였다. 사육형태별 현황은 평사 14농가(70%), 방사 3농가(15%), 평사+방사 3농가(15%)였다. 보온덮개계사와 자연농법계사의 사육밀도는 대부분의 농가에서 4~6수/$m^2$ 로 사육하였고, 판넬철골조계사는 9농가 중 7농가에서 6~7수/$m^2$로 사육하였다. 사료섭취량은 20농가 중 11농가(55%)에서 120~130 g을 섭취하였으며, 보온덮개, 자연농법, 판넬철골조계사의 농가 수가 각각 3농가(15%), 3농가(15%), 5농가(25%)이었다. 사육시설별 산란피크는 보통 24~28주령이었고, 산란율 80% 이상의 농가는 보온덮개 75%, 자연농법 56.2%, 판넬철골조계사 67%이었다. 호흡기 질병 발병률이 55%로 가장 높았으며, 보온덮개계사 75%, 자연농법계사 70%, 판넬철골조계사 33%가 발병하였다. 대장균증은 판넬철골조계사에서만 나타났으며, 발병률은 44%였다. 동물복지 인증을 받은 계란(특히 판넬철골조계사) 중 70%가 대형마트나 지역판매장으로 유통되었다. 사육형태에 따른 계란가격은 평사 14농가 중 6농가(42.9%)가 계란 1개당 200~250원으로 계산되었다. 이런 결과들은 현재 동물복지 인증농가의 생산실태를 보여주고 있다.

• 디자인학연구
• /
• 제16권1호
• /
• pp.251-260
• /
• 2003

근무환경을 개선함으로써 업무효율이 높아지는 것이 자명한 상황에서 사무환경의 중요한 요소인 공간구획용 패널의 연구 개발은 필수적이다. 단순히 물리적 환경만이 아니라 심리적, 생리적, 경제적 환경까지 고려할 때 조립형 벽체 패널의 요구 조건으로는 차음/흡음 성능, 통신설비 설치 용이성 등을 포함한 기능적 요소, 최초 설치비용, 재활용성, 설치 용이성 등의 경제적 요소, 최종 마감 재질 및 형태 둥을 통한 시지각적 만족도를 위한 심미적 요소, 구조적 안정성, 건강성 등을 포함하는 안전 요소 등이 포함된다. 제품 개발을 통한 분석 결과, 재활용성을 높이고 현장작업의 축소 및 제품완성도를 높이기 위해 프레임식 구조의 장점을 살린 패널식 구조의 연구가 요구된다. 공장에서 많은 공정이 이루어질 수 있는 패널식 부재는 제품의 완성도를 높일 수 있는 장점이 있으나 시공현장에서의 융통성이 떨어질 수 있다. 따라서 현장 조건의 완성도가 낮아 발생하는 문제를 보완할 수 있는 디테일의 개발이 요구된다. 더불어 환경적 쾌적성에 영향을 주는 차음 및 흠음 성능, 안전과 건강을 고려한 디자인 및 재료에 대한 지속적 연구가 요구된다.

• Journal of Radiation Protection and Research
• /
• 제46권3호
• /
• pp.134-142
• /
• 2021

Background: From 2018 to 2020, the Expert Study on Public Understanding after the Fukushima Daiichi Nuclear Power Plant Accident (the Expert Study Group) identified and analyzed activities designed to promote public understanding of science and radiation since the Fukushima accident, and held discussions on how to achieve public understanding in the situation where public confidence has been lost, and how experts should prepare for dealing with the public. This panel session was held at the 53^rd meeting of the Japan Health Physics Society on June 30, 2020. Materials and Methods: First, three subgroup (SG) leaders reported their research methods and results. Then, two designated speakers, who participated as observers of the Expert Study Group, commented on the activities. Next, the five speakers held a panel discussion. Finally, the rapporteur summarized. Results and Discussion: SG leaders presented reports from researchers and practitioners in health physics and environmental risks who provided information after the Fukushima accident. During the discussion, experts in sociology and ethics discussed the issues, focusing on the overall goals of the three groups, local (personal) and mass communication, and ethical values. Many of the activities instituted by the experts after the accident were aimed at public understanding of science (that is, to provide knowledge to residents), but by taking into account interactions with residents and their ethical norms, the experts shifted to supporting the residents' decision-making through public engagement. The need to consider both content and channels is well known in the field of health communication, and overlaps with the above discussion. Conclusion: How to implement and promote the public engagement in society was discussed in both the floor and designated discussions. Cooperation between local communities and organizations that have already gained trust is also necessary in order to develop relationships with local residents in normal times, to establish an information transmission system, and to make it work effectively.

• International journal of advanced smart convergence
• /
• 제11권3호
• /
• pp.187-196
• /
• 2022

In this paper, we propose an example of designing and constructing a roof-type solar power plant structure equipped with a Pseudo-BIPV (Building-Integrated Photovoltaic) shape suitable for use as a roof of a small warehouse with a sandwich-type panel structure. As the characteristics of the roof-type solar power generation facility to be installed in the small warehouse proposed in this study, the shape of the roof is not a general A type, but a right-angled triangle shape with the slope is designed to face south. We chose a structure in which an inverter for one power plant and a control facility are linked by grouping several roofs of buildings. In addition, the height of the roof structure is less than 20 cm from the floor, and it has a shape similar to that of the BIPV, so it is building-friendly because it is almost in close contact with the roof. At the same time, the roof creates a reflective light source due to the white color. By linking this roof with a double-sided solar panel, we designed it to obtain both the advantage of the roof-friendliness and the advantage of efficiency improvement for the electric power generation based on the double-sided panel. Compared to the existing solar power generation facilities using A-shaped cross-sectional modules, the power generation efficiency of roofs in this case is increased by more than 11%, which we can confirm, through the comparison analysis of monitoring data between power plants in the same area. Therefore, if the roof-type solar structure suitable for the small warehouse we have presented in this paper is used, the facilities of electric power generation is eco-friendly. Further it is easier to obtain facility certification compared to the BIPV, and improved capacity of the power generation can be secured at low material cost. It is believed that the roof-type solar power generation facility we proposed can be usefully used for warehouse or factory-based smart housing. Sensor devices for monitoring, CCTV monitoring, or safety and environment management, operating in connection with the solar power generation facilities, are linked with the Internet of Things (IoT) solution, so they can be monitored and controlled remotely.

• 콘크리트학회지
• /
• 제10권1호
• /
• pp.171-178
• /
• 1998

본 연구는 폴리우레탄 콘크리트 패널의 바닥재로서의 이용 가능성을 검토하기 위하여 수행되었다. 따라서 각종 요구되는 성능에 부합되는 배합을 달리한 폴리우레탄 콘크리트를 제작하여 각종 물성 실험을 실시하였다. 또한 폴리우레탄 콘크리트 패널을 제작하여 직접 현장에서의 시공한 수 바닥충격음 실험을 실시, 그 효과를 평가하였다. 실험결과, 폴리우레탄 콘크리트의 성능과 코스트의 밸런스가 적절하게 확보된 최적배합비를 도출할 수 있었으며, 특히 기존 바닥구조에 비해 공동주택의 층간소음을 어느 정도 줄일 수 있고 동시에 시공공정의 단축과 단열효과로 보다 더 우수한 바닥난방구조를 제안할 수 있다.

• KIEAE Journal
• /
• 제7권1호
• /
• pp.73-80
• /
• 2007

This paper aims to develop the diffused reflection material in order to reduce the solar absorption coefficient, and to compare the thermal properties with the different roof structure system; one is using the diffused reflection material applied the upper side of the rigid sheet waterproof system and the other is using the conventional up-side down waterproof system on the roof. For this purpose two experimental test boxes were made of same iso-panel wall and floor with different roof system. The experiment was carried out under these process; measure the surface temperature exposed solar radiation of the variation of the reflection materials(cement paste, silica, galvanized steel and titanium dioxide(TiO2)), measure and analyze the variation of the temperature distribution of the each roof system and indoor air in order to evaluate the thermal properties according to the different roof system. The result shows clearly that using the titanium dioxide(TiO2) might be more effective to reduce the solar insolation.