• Journal of Environmental Science International
• /
• v.13 no.1
• /
• pp.19-26
• /
• 2004

The purpose of the study was to construct a forecast system of flood inundation area at natural stream channels. The study built the system to interpret the flood inundation area in four stages ; constructing topography data around the stream channel, interpreting flood discharge, interpreting flood elevation in the stream channel, and interpreting the flood inundation and mapping. According to the result of the analysis, as for the characteristic of flood inundation around the area within the purview of this study, although there were areas where flood inundation over a bank caused a flooded area, the failure of the internal drainage in the ground lower than flood elevation caused more serious problems. Rather than the existing method where only the estimated flood elevation data is used based on the hydrographical stream channel trace model(such as the HEC-RAS model) to establish the flood inundation area, if the procedure introduced in this study was applied to interpret the floodplain, actual flood inundation area could be visibly confirmed.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.4
• /
• pp.1-15
• /
• 2013

Great loss of life and property has been occurred by the severe flood globally. In Korea, a flood inundation map is used as one of the non-structural measures for reducing flood damage, and various inundation models have been studied for flood inundation analysis. This study applies LiDAR data and LISFLOOD model for flood inundation analysis and discusses the the modeling results from levee breaching scenarios for evaluating the applicability of the model to stream inundation modeling. In the results of LISFLOOD modeling, maximum inundation area was similar to the inundation map by HEC-RAS model just less than 4%. The inundation area by each levee breaching scenario showed the difference from 0.2% to 6.5%. Inundation processes were different each other according to the position of levee breach point, and maximum inundation area and depth were changed by the flow direction of stream and flood plain. This study shows that LISFLOOD model can be applied properly to stream inundation analysis using various inundation scenarios.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.671-675
• /
• 2004

The objective of this study is to develope estimation techniques of flood inundation area for given rainfall frequency using GIS. For this, Namdae-cheon is selected as pilot station and Inundation area is estimated with routing of flood volume from river mouth to upstream. As a results inundation area of Namdae-cheon estimated with $1.5km^2\~9.7km^2$ for $5\~500$ frequency years. In addition it is noted that results of this study can use in flood risk analysis for establishment of flood countermeasures.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.49 no.2
• /
• pp.17-24
• /
• 2007

This study analyzes the flood inundation in low agricultural area caused by rainfall during typhoon periods and how flood inundation areas should be affected. GIS techniques, HEC-HMS and HEC-GeoHMS were used for flood runoff, HEC-RAS was applied in water surface elevation analysis at each cross-section. RMA2, SED2D were applied for runoff characteristics of inundation areas and river bed change and distribution of sediment. As a result, velocity distribution was analyzed 2.6 m/s-3.4 m/s in flood inundation by water level increase. In the case of bed elevation change, most sediments were deposited to the parts that adjoin bank.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.3
• /
• pp.1-12
• /
• 2007

This study was conducted in order to analyze a flooded area by the overflow of a stream using hydrological and hydraulic models and to estimate the utility of the SAR satellite image by comparing a protected lowland inundation area with a past inundation area map. The research area selected for this study is Sapkyocheon, which was flooded in August 1999. The flood stage was analyzed to select an inundation area by applying flood events in August 1999. By importing analyzed flood stage data into TIN data of WMS, the inundation area of a protected lowland was selected and then compared with an flood hazard map of WAMIS. An inundation area is selected by the SAR satellite image in comparing the image of August 4, 1999 (inundation time) with the image of September 8, 2002 (after inundation). The method of selecting an inundation area with the hydraulic model of HEC-RAS can be used to select an inundation area of external overflow, but it has the limit of selecting an inundation area concerning the internal drainage. The method of using the SAR satellite image can complement the limit of an inundation area of an internal drainage but accuracy of inundation area depends on using SAR satellite image acquired at time of maximum depth.

• Journal of Environmental Science International
• /
• v.25 no.8
• /
• pp.1165-1176
• /
• 2016

The accuracy of digital elevation models (DEMs) is crucial for properly estimating flood inundation area. DEM pixel size is especially important when generating flood inundation maps of small streams with a channel width of less than 50 m. In Korea, DEMs with large spatial resolutions of 30 m have been widely applied to generate flood inundation maps, even for small streams. Additionally, when making river master plans, field observations of stream cross-sections, as well as reference points in the middle of the river, have not previously been used to enhance the DEM. In this study, it was graphically demonstrated that high-resolution DEMs can increase the accuracy of flood inundation mapping, especially for small streams. Also, a methodology was proposed to modify the existing low-resolution DEMs by adding additional survey reference points, including river cross-sections, and interpolating them into a high spatial resolution DEM using the inverse distance weighting method. For verification purposes, the modified DEM was applied to Han stream on Jeju Island. The modified DEM showed much better accuracy when describing morphological features near the stream. Moreover, the flood inundation maps were formulated with the original 30 m pixel DEM and the modified 0.1 m pixel DEM using HEC-RAS modeling of the actual flood event of Typhoon Nari, and then compared with the flood history map of Nari. The results clearly indicated that the modified DEM generated a similar inundation area, but a very poor estimate of inundation area was derived from the original low-resolution DEM.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5D
• /
• pp.749-757
• /
• 2008

Recently, flood damages have increased with heavy rainfall and typhoon influences, and it requires that visualization information to the flood inundation area of downstream in dam discharge. This study developed 3D GIS system that can visualize flood inundation area for Namgang Dam downstream. First, DEMs extracted from NGIS digital maps and IKONOS satellite images were optimized to mount in iWorld engine using TextureMaker and HeightMaker modules. And flood inundation area of downstream could be efficiently extracted with real-time flooding water level using Coordinate Operation System for Flood control In Multi-reservoir (COSFIM) and Flood Wave routing model (FLDWAV) in river cross section. This visualization information of flood inundation area can be used to examine flood weakness district needed in real time Dam operation and be applied to establish the rapid flood disaster countermeasures efficiently.

• Korean Journal of Agricultural Science
• /
• v.48 no.3
• /
• pp.515-526
• /
• 2021

The frequency of typhoons and torrential rainfalls has increased due to climate change, and the concurrent risk of breakage of dams and reservoirs has increased due to structural aging. To cope with the risk of dam breakage, a more accurate emergency action plan (EAP) must be established, and more advanced technology must be developed for the prediction of flooding. Hence, the present study proposes a method for establishing a more effective EAP by performing flood and inundation analyses using one- and two-dimensional models. The probable maximum flood (PMF) under the condition of probable maximum precipitation (PMP) was calculated for the target area, namely the Gyeong-cheon reservoir watershed. The breakage scenario of the Gyeong-cheon reservoir was then built up, and breakage simulations were conducted using the dam-break flood forecasting (DAMBRK) model. The results of the outflow analysis at the main locations were used as the basis for the one-dimensional (1D) and two-dimensional (2D) flood inundation analyses using the watershed modeling system (WMS) and the FLUvial Modeling ENgine (FLUMEN), respectively. The maximum inundation area between the Daehari-cheon confluence and the Naeseong-cheon location was compared for each model. The 1D flood inundation analysis gave an area of 21.3 km², and the 2D flood inundation analysis gave an area of 21.9 km². Although these results indicate an insignificant difference of 0.6 km² in the inundation area between the two models, it should be noted that one of the main locations (namely, the Yonggung-myeon Administrative and Welfare Center) was not inundated in the 1D (WMS) model but inundated in the 2D (FLUMEN) model.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.1
• /
• pp.74-89
• /
• 2015

The objective of this study is to present countermeasures for mitigation of flood damage with inundation analysis considering the effect of inland and river flood and prediction of flood inundation area, depth and time against emergencies caused by abnormal flood and local torrential rainfall. In this study, 2-D inundation analysis was fulfilled on the basis of river flood analysis applying to HEC-HMS and FLDWAV model and inundation analysis applying to SWMM model for the area of Shineum-dong, Gimcheon-si. Also expected inundation depth and area about probable rainfall of 100 and 200 years frequency were suggested. If expected inundation depth and flooding area is presented on the basis of this inundation analysis considering the effect of inland and river flood, it would be an important preliminary data to establish structural and nonstructural countermeasures for flood prevention. Also if flood risk map is prepared based on the result of inundation analysis, it would be useful to evacuate residents in high-risk area and regulate road and vehicle.

• Spatial Information Research
• /
• v.18 no.1
• /
• pp.49-56
• /
• 2010

Considering the flood problem in urban areas, it is important to estimate disaster risk using accurate numerical analysis for inundation. In this study, it is carried out to calculate inundation depth in Samcheok city which suffered from serious flood damage in 2002. The urban flood model was developed by cording Manning n, elevation, and building's rare on ArcGIS for reducing error on data exchange, and applied for estimating flood damage by grid. This paper describes the extraction of sewer lines and buildings area, estimates its influence on flood inundation extent, and integrated 1D/2D flow to simulate inundation depth in high-density building area. This paper shows an integrated urban flood modeling including rainfall-runoff, inundation simulation, and mathematical flood damage estimation, and will serve drainage design for reducing its damage.