• Journal of Microbiology
• /
• 제45권2호
• /
• pp.122-127
• /
• 2007

Factors indicating culture status of two Spirulina platensis strains were monitored in a batch mode cultivation for 36 days. Changing mode in all factors showed a common turning point, indicating shift of cell or culture status. Mean biomass productivity was highly sustained until day 22, chlorophyll a concentration peaked on day 22, pH value was > 12 on day 22, coil number was abruptly shortened on day 22, and floating activity was sustained at greater than 79% after day 22, indicating that day 22 is a criterion reflecting phase-transfer in cell physiology in a batch culture system. Many of these changes may have been caused by increased pH, suggesting that pH control is essential for mass production of S. platensis. Fluctuations in floating activity were likely induced by the number of cellular gas vacuoles. Consequently, coil number per trichome and floating activity of S. platensis could readily act as simple indicators for determination of culture status or harvesting time of cells.

• 한국유체기계학회 논문집
• /
• 제17권3호
• /
• pp.52-58
• /
• 2014

The development of efficient systems for water quality improvement for water sources such as lakes, dams and reservoirs has become a necessity to provide not only a cleaner and safer water to the urban society, but also to provide a cleaner and safer environment for the aquatic organisms living in lakes, dams and reservoirs. This study concentrates on the outlet design and internal flow analysis of an axial flow pump used in a floating type water treatment system completely powered by renewable energy source. The treatment system is designed to raise water from depths of about 3~5m up to the water surface where it is naturally mixed with air as it is released back to the reservoir. The outlet of a typical axial flow pump is modified to suit the floating type water mixer. The performance of the axial flow pump is studied by investigating the internal flow of the system. Results show that the change in outlet shape does not alter the performance of the original pump at the maximum efficiency point as long as the cross sectional area of inlet is the same as the outlet. The axial pump for floating type water treatment system has good cavitation performance in the whole flow passage.

• 대한조선학회논문집
• /
• 제56권5호
• /
• pp.396-409
• /
• 2019

In this paper, a comparative study on the radiation techniques for the motion analysis of the three dimensional floating structure with the forward speed was carried out. The Sommerfeld radiation condition, the damping technique, and the point shift technique were used for the comparative study. Radiated wave patterns and hydrodynamic coefficients of the heave motion of floating structure with the forward speed were compared and analyzed. The characteristics and limitations of each radiation technique were analyzed through the calculation results. To overcome the limitations of conventional radiation techniques, the hybrid radiation technique combining the Sommerfeld radiation condition with the damping technique was proposed. It is confirmed that the proposed method, the Hybrid radiation technique, improves the limitation of the speed range and the dissipation of the wave of the conventional radiation technique. The motion analysis code of the three dimensional floating structure with the forward speed based on the Rankine source method with hybrid radiation technique was developed. In order to validate the developed code, hydrodynamic analyses were carried and compared with published experiments.

• 융합신호처리학회논문지
• /
• 제8권3호
• /
• pp.149-155
• /
• 2007

본 논문에서는 ARM9 프로세서를 위한 실시간 JPEG 2000 코덱을 구현하였다. 구현된 코덱은 프로세서, 메모리와 같은 시스템의 리소스를 효율적으로 사용할 수 있도록 제어 코드와 데이터 관리 코드를 분리하여 설계하였다. 특히 이동전화와 같은 임베디드 환경에서는 제한된 프로세서와 내부메모리를 이용하여 양질의 서비스를 제공하는 것이 매우 중요하다. ARM9계열의 프로세서는 부동소수점을 제공하지 않기 때문에 DWT와 같이 아주 반복적으로 부동소수점 연산을 필요로 하는 동작을 실행하기 위해서는 많은 연산시간이 필요하다. 제안된 코덱은 이러한 단점을 극복하기 위해 고정소수점을 이용하여 프로그램을 하였다. 또한 캐시 메모리를 고려한 코드 최적화 방법을 적용하여 연산속도를 더욱 향상시켰다.

• 반도체디스플레이기술학회지
• /
• 제3권1호
• /
• pp.21-26
• /
• 2004

Recently with the development of power switching device and DSP which has peripheral devices to control AC servo system, the servo technology has met a new development opportunity. Those things make it possible to reduce the time of developing a AC servo system. Fixed point DSP such as TMS320F240x, and TMS320F28x series have a disadvantage in calculating floating number where TMS320C32 or TMS320C31 are floating point DSP. However they usually become a complex hardware system to implement the AC servo system and it increases the cost. In this study, a DSP based AC servo system with a 3-phase PMSM is proposed. The newly produced DSP TMX320F28l2-version C which has the performance of fast speed, 150MIPS, and a rich peripheral interface such as a 12bit high speed AD converter, QEP(Quadrature Encoder Pulse) circuit, PDPINT(Power Drive Protect Interrupt), SVPWM module and dead time module are used. This paper presents a method to overcome fixed point calculating using scaling all parameters. Also space vector pulse width modulation (SVPWM) using off-set voltage and a digital PI control are implemented to the servo system.

• 전자공학회논문지B
• /
• 제31B권8호
• /
• pp.11-19
• /
• 1994

The matching probability P(ο/$\lambda$), of the signal sequence(ο) observed for a finite time interval with a HMM (Hidden Markov Model $\lambda$) indicates the probability that signal comes from the given model. By utilizing the fact that the probability represents matching score of the observed signal with the model we can recognize an unknown signal pattern by comparing the magnitudes of the matching probabilities with respect to the known models. Because the algorithm however uses floating point variables during the computing process hardware implementation of the algorithm requires floating point units. This paper proposes an integer algorithm which uses positive integer numbers rather than float point ones to compute the matching probability so that we can economically realize the algorithm into hardware. The algorithm makes the model parameters integer numbers by multiplying positive constants and prevents from divergence of data through the normalization of variables at each step. The final equation of matching probability is composed of constant terms and a variable term which contains logarithm operations. A scheme to make the log conversion table smaller is also presented. To analyze the qualitive characteristics of the proposed algorithm we attatch simulation result performed on two groups of 10 hypothetic models respectively and inspect the statistical properties with repect to the model order the magnitude of scaling constants and the effect of the observation length.

• 한국해양공학회지
• /
• 제18권4호
• /
• pp.15-22
• /
• 2004

Static and dynamic analyses of a very flexible and light riser, for upwelling the deep ocean water, is performed. In this numerical study, an implicit finite difference algorithm is employed for three-dimensional riser equations. Fluid non-linearity and bending stiffness are considered and solved, using the Newton-Raphson iteration. Maintaining the depth of end point of a flexible and light riser is very important for upwelling deep ocean water in a floating type development system. Weight is attached at the end point of the riser in order to maintain its intake depth. It is designed under the strong surface current and the configuration of the rise is predicted. In the dynamic analysis, the tension variation at the top point of the riser is presented. T e results of this study can contribute to the design of the development system in floating type for upwelling deep ocean water.

• 한국통신학회논문지
• /
• 제25권8B호
• /
• pp.1460-1468
• /
• 2000

본 논문에서는 고정소수점 DSP인 TMS320C6201을 이용하여 MPEG-1 Layer III 오디오 디코더를 실시간으로 동작하도록 구현하였다 음질의 손실 없이 부동소수점 연산을 고정소수점 연산으로 변환하였으며 적은 메모리를 사용하여 동작하도록 소스프로그램을 최적화하였다 특히 연산의 정확성을 위해서 Descaling 모듈에서 중점적으로 부동소수점 연산을 고정소수점 연산으로 변환하여UT고 연산량과 프로그램 크기를 줄이기 위해서 IMDCT 모듈과 Synthesis Polyphase Filter Bank 모듈에 대해서 최적화 작업을 수행하였다 그 결과 구현된 디코더는 TMS320C6201 DSP가 수행할 수 있는 최대 연산량의 26% 만으로 실시간 동작이 가능하여UT으며 사용된 프로그램 ROM의 크기는 3.13 kWord 데이터 RAM의 크기는 9.94 kWord 이었다 부동소수점 프로그램의 최종 출력 PCM값과 구현된 고정소수점 연산의 최종 출력 PCM값을 비교하여 60 dB 이상의 높은 SNR를 가짐을 확인함으로써 고정소수점 연산의 정확성을 검증하였다. 또한 EVM 보드에서 사운드 입출력과 호스트(PC) 통신을 이용하여 실시간으로 동작함을 확인하였다.

• 한국CDE학회논문집
• /
• 제7권2호
• /
• pp.75-80
• /
• 2002

This paper details a robust and efficient algorithm for point classification with respect to a polygon in 2D real number domain. The concept of tolerance makes this algorithm robust and consistent. It enables to define‘on-boundary’ , which can be interpreted as either‘in-’or‘out-’side region, and to manage rounding errors in floating point computation. Also the tolerance is used as a measure of reliability of point classifications. The proposed algorithm is based on a ray-intersection technique known as the most efficient, in which intersections between a ray originating from a given test point and the boundary of a region are counted. An odd number of intersections indicates that the point is inside region. For practical examples the algorithm is most efficient because most edges of the polygon region are processed by simple bit operations.

• 한국통신학회논문지
• /
• 제26권5B호
• /
• pp.685-691
• /
• 2001

본 논문은 4단계 파이프 라인과 VLIW (Very Long Instruction Word) 구조를 갖는 FLOVA라는 DSP 프로세서의 테스트용이 설계 기법을 다룬다. Full-scan design, BIST(Built-In-Self-Test), IEEE 1149.1의 기법들이 플립플롭과 floaing point unit, 내장된 메모리, I/O cell 등에 각각 적용되었다. 이러한 기법들은 테스트 용이도의 관점에서 FLOVA의 구조에 적절하게 적용되었다. 본 논문에서는 이와 같이 FLOVA에 적용된 테스트 용이 설계의 특징들을 중심으로 상세하게 기술한다.