• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.23-28
• /
• 2007

This study estimated the behavior(movement) characteristics of floating marine debris flowing in the Nakdong River Estuary using a simple numerical particle-tracking model. This numerical experiment considered the maximum water discharge outflow from the Nakdong River barrage during the passage of typhoon Maemi in 2003. The simulation showed that the particle distribution and movement of floating marine debris in the Nakdong River Estuary reached a stable state at 72 hours after the typhoon had passed, during the flαxl period of river discharge. The quantity of floating particles distributed on the east coast of Gadeok and Jinu Islands increased by 40% at 33 hours after starting the model, while the change in other sea areas was $20{\sim}40%$.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.6
• /
• pp.1358-1365
• /
• 2014

This study is to analyze the variability of floating marine debris(FMD) on the Kuroshio Current Area(KCA). A sighting survey was conducted from July 5th to July 16th, 2013 while navigating on KCA from Keelung, Taiwan to Tokyo, Japan using T/V KAYA of Pukyong National University. The sampled zones were divided into 6 transects and observed FMD during daytime in each transect. And also specified with 56 segments by defined one hour tracking distance as one segment on the survey routes. The results are as follows: 1. Hourly deviation of FMD's quality in each transect goes up to 10 times at NT, HS and SK. The others 3 times or so. 2. During the surveys, the largest amounts of it were found as total mean of $31.0num(ea)/km^2$ at NT transect in the northern part of Taiwan. So it is estimated because this area has gotten out of KCA. 3. And also quality of it on KCA was not directly related to Kuroshio Current's strong or weak. In conclusion, For the more detailed results on KCA are required of much more surveys.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.4
• /
• pp.342-348
• /
• 2015

Recently, many waste is getting into the ocean because of natural disasters and trash of illegality. These destroy the marine ecosystem and the great views around the ocean. Many methods are used for the removal of the waste in the ocean and one of the main waste forms is floating debris. In order to remove the waste, the nets are mostly used and the ships are recently used. However, many problems are occurred due to low number of people and techniques in the ship-based removal. To solve this problem, a surface robot for floating debris removal is developed. To verify the performance of the developed robot, tests of surge, yaw, and floating debris removal are executed. The test results show the possibility of real applications and the need for additional studies.

• Journal of Fisheries and Marine Sciences Education
• /
• v.11 no.2
• /
• pp.203-215
• /
• 1999

Floating debris was recorded from a training ship, Kaya, of Pukyong National University with about 12 knots speed at July 19~21, 1999 and July 24~26. The sampled area is the Yellow Sea (YS) connected from Cheju Is. of Korea to Qindao harbor of China, divided into 88 unit segments on survey routes. Debris fabrication materials were categorized with 6 items using the following; man-made or natural wood items, paper and cardboard, nylon netting and rope, styrofoams, vinyl and plastics, floating metal and glass containers. All identified items within a $120{\pm}20m$ wide band were recorded but ignored if beyond this boundary. The results of distribution of floating debris in the area are as follows: 1. The greatest quantities of marine debris discovered during the survey were $184pieces\;per\;km^2$ near Qindao harbor. The next polluted areas, Sohuksan islands, positioned in the eastern part of YS were scattered in about $40pieces/km^2$ or so. 2. Among items, woods, paper and cardboard, vinyl and plastics were found out near Qindao Coast of China. On the other hand, there were many styrofoams, nylon netting and rope near the area of Sohuksan islands in the eastern part of YS. 3. The distribution densities of western part of YS near Qindao are varied with largely range in items and quantities but those of the eastern part, near Sohuksan islands were nearly constant. 4. Styrofoams were composed of 63% among all debris in YS, next paper and cardboard 15%, and wood item, vinyl and plastics each 10%. Therefore, marine debris of YS is revealed that distribution characteristics and composition are very different in each area. These phenomena are concluded that they largely depend on the life styles in land and the utilities of the sea. And of items, styrofoams is dominated by the distribution pattern of YS. Furthermore, surveys are continuously being investigated, and from this it is hoped that a much wider coverage can be achieved, perhaps all sites of the YS and contributed to the finding sources, the stationary area and removal method of debris joined the flow patterns.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.3
• /
• pp.338-344
• /
• 1999

Floating debris was recorded from a training ship, $\sharp$1 Kwanaksan, of Pukyong National University with about 10 knots speed at July 15th and 20th of 1997. The sampled area is the middle of southern sea of Korea, divided into 44 unit segments on survey routes. Debris fabrication materials were categorized with 6 items using the following; man-made or natural wood items, paper and cardboard, nylon netting and rope, styrofoam, plastics, floating metal and glass containers. All identified items within a 100 $\pm$ 2 m wide band were recorded but ignored if beyond this boundary. The results of distribution and transport of floating debris in the area are as follows: 1. The quantities of debris during the survey were distributed from $1.6\~369.7\;items/km^2$. The most obvious trend is the widespread distribution of all debris. The highest densities of all debris were discovered in the coastal waters of Namhae and Yokji island, and of about 50 km off from the southward of Yokji and about 74 km off from the eastward of Komun island. Especially many of small styrofoams within $\phi$20 cm were observed in these segments. 2. Styrofoams and plastics were composed of $83.5\%$ among all debris, next woods items, $9.8\%$. 3. The quantities, distribution shapes and composition of debris were varied as the observed duration and the natures of each items. 4. These phenomena are concluded that firstly they depend on the river discharges included debris due to precipitation falls, secondly inflow or dumping debris are drifting to the off-shore by Kuroshio currents present at their adjacent sea, But on the basis of the observed data it is difficult that source position, quantities and inflow items of debris are identified, and also the transport processes is pursue. further more surveys are continuously being investigated, and from this it is hoped that a much wider coverage can be achieved, perhaps on all sites of the Coast of Korea and contributed to the stationary area, finding of sources, removal method of debris and resistants of marine productivity.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.1
• /
• pp.47-62
• /
• 2001

An experimental study was peformed to provide the numerical models to predict the physical fate of marine debris with the key information concerning their trifling and sinkage on the sea. For hygroscopic materials their floating times in a pseudo ocean environment were measured, and for non-hygroscopic objects their drifting limes in a certain wave condition were measured. For sinking materials or objects became to be sinkable free falling experiment was performed to evaluate their falling speed. Summarized information was condensed into a numerical model to predict the most possible region of a significant marine debris accumulation, and the seas connected to the Han river and the Nak-Dong river were considered for the simulation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.2
• /
• pp.208-215
• /
• 2017

When persistent oil, such as crude oil or Bunker C oil, is spilled at sea, viscosity increases through the weathering process. Equipment that can collect this oil when mixed with floating marine debris is very limited. In this study, devices that can be attached to the outside of existing oil skimmers have been applied to the inside of the main body, to develop an unmanned conveyor belt type floating marine debris and high viscosity oil recovery skimmer, which is composed of a conveyor belt, a sweeper with a forced inflow device, and a collection tank equipped with a buoyant body. The resulting skimmer was operated at a speed of 1.2 knots at a distance of 30 m in a sea area test. It was stable when moving laterally in any direction. An oil recovery performance test was conducted using a portable storage tank, and oil was recovered from a minimum of $7.8k{\ell}/h$ to a maximum of $23.3k{\ell}/h$. Moreover, recovery of $7.7k{\ell}/h$ was obtained in a wave water tank test with floating marine debris such as PET bottles and oil mixed. If the equipment developed in this study was used in the field for oil pollution accidents, it could be expected to contribute to improved response capability. We believe our equipment could be used in further studies to improvement the performance of existing portable oil skimmers.

• Journal of Fisheries and Marine Sciences Education
• /
• v.23 no.4
• /
• pp.772-778
• /
• 2011

In order to estimate the densities and composition of floating marine debris (FMD), a sighting survey was conducted from July 1st to July 14th, 2009 in the East China Sea (ECS) using a training vessel "Kaya (1,737 ton)" of Pukyong National University. The sampled zones are divided into 5 transects by observation day during the survey days and the densities and composition in each transect were calculated using the numbers of item per $km^2$. The results of distribution of FMD are as follows: 1. During the surveys, a large variety of FMD was discovered and highest densities were found in the Central East(CE) of the East China Sea(ECS) (48.2 items/$km^2$), whereas densities in the less populated transects in Okinawa(OK1, OK2) were comparatively low(3.5 ~ 4.9 items//$km^2$). 2. Among the classified 6 items, styrofoams(Styro) were most abundant and ubiquitous(10.3 items/$km^2$, 53% of the total number), except OK2 area. Next abundant item was vinyl and plastics called V & P(4.9 items/$km^2$, 25%). Above 2 items of the major proportion of FMD accounted for 78% of the total number of FMD observed through this study. 3. The percentages of manufactured plastics(Styro and V & P) found in the Seas near Korean Peninsula were varied from 87.2% to 69.8%. It was recognized that polluted level is middle value among them.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.225-225
• /
• 2017

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.906-917
• /
• 2022

This study aimed to compare differences according to categories of fishery and marine environmental policies for the (estimated) amount of fishery waste generated by fishing, and to analyze the correlation between associated independent and dependent variables. The independent variables were divided into three dif erent sectors. The first sector included precautionary policies that observed eco-friendly fishing support program, institutional prevention activities, and physical barriers installation. The second sector with the current management policies included the relevant vessel operations, establishment of fishery order, fishery restructuring, and fishery ground clean-up. Thirdly, post-response policies comprised the litter purification from river to shoreline, the collection and removal of marine, sedimentary, and floating debris, purchasing salvaged debris generated while fishing, fishery waste disposal, and repairing damage caused by marine litter. The indicator used was the settlement amount by each program. The dependent variable was the estimated amount of fishery waste and the indicator was the sum of the loss of traps and gill nets and the loss of their appendages. According to the results of Kruskal-Wallis Test, the estimated amount of fishery waste was highest in the East Sea in terms of sea area and the highest in the Si(city) according to basic local municipality. The settlement amount related to the marine environment services was largest in the Gun(county). Further, there were significant differences between Gun(county) and the other regions(Si(city) and Gu(autonomous district)) with respect to most variables. The variables related to the estimated amount of fishery debris were the project purchasing salvaged debris generated while fishing and fishery waste disposal program in the post-response policies.