• Journal of Korea Water Resources Association
• /
• v.43 no.12
• /
• pp.1039-1050
• /
• 2010

Relative accuracy of six discharge measurement methods-velocity-area method, rod-float method, ADCP moving-vessel method, ADCP fixed-vessel method, electromagnetic wave surface velocimeter (EWSV), LSPIV- is evaluated by comparing discharges measured by them with dam released discharges. Data from 39 times of concurrent discharge measurement campaigns are analyzed. Except the rod-float method, measured discharges show absolute errors less than 6.2% with dam discharges. When the four methods is evaluated by being compared with discharges measured with the conventional velocity-area method, discharges with electromagnetic wave surface velocimetry shows 7.35% of absolute errors and other three methods shows absolute errors less than 6%. The rod-float method, which shows large discrepancy compared with dam and velocity-area method, need complementary verification.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.3
• /
• pp.83-92
• /
• 1999

In this paper, the fluid-structure interaction of large floating structures has been rigorously analyzed and the shear effect on the structural deformation has been investigated in oblique waves. A constant panel method(CPM) based on the Green function method is implemented for computing the hydrodynamic pressure, while a finite element method(FEM) is applied for the structural response based on the Mindlin plate theory with including shear deformation. In order to validate the method, we compared numerical results with experimental ones of Mega Float carried out by Yago & Endo in head waves. General behavior shows good agreement but the local displacement at the ends is slightly different. The numerical results show that the radiation pressure due to the fluid-structure interaction is locally larger than that of wave excitation and mooring devices greatly reduce the response. It is observed that the shear effects among the total deformation constitutes about 4% in the case of Mega Float in oblique waves.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.3
• /
• pp.239-245
• /
• 2017

As a new technical approach, wave energy converter by using vertical motion of water in the multiple water chambers were developed to realize actual wave power generation as eco-environmental renewable energy. And practical use of wave energy converter was actually to require the following conditions: (1) setting up of the relevant device and its application to wave power generation in case that severe wave loading is avoided; (2) workability in installation and maintenance operations; (3) high energy conversion potential; and (4) low cost. In this system, neither the wall(s) of the chambers nor the energy conversion device(s) are exposed to the impulsive load due to water wave. Also since this system is profitable when set along the jetty or along a long floating body, installation and maintenance are done without difficulty and the cost is reduced. In this paper, we describe the system which consists of a float, a shaft connected with another shaft, a rack and pinion arrangement, a ratchet mechanism, and rotary type generator(s). Then, we present the dynamics model for evaluating the output electric power, and the results of numerical calculation including the effect of the phase shift of up/down motion of the water in the array of water chambers aligned along the direction of wave propagation.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.4
• /
• pp.17-26
• /
• 2019

This research aims to obtain useful data on the development of compression garment products with high-stretch knitted materials. Using nylon SCY, four specimens were knitted. Then, appearance (width, length, weight, thickness), stretch property (stretch, recovery) and clothing pressure were measured and their interrelation was analyzed. In the comparison of appearance features, yarn floating caused shrinkage in both course and wale directions of the specimens. Yarn overlapping by tucking caused a release in the course direction and shrinkage in the wale direction. Also, structural change was affected by the weight and thickness change of the knitted fabric. In the analysis of fabric stretch, yarn floating reduced the extension in course direction and increased that in wale direction of the knitted fabric. However, yarn overlapping reduced the elongation in both directions. In the analysis of recovery, yarn floating and overlapping raised fabric recovery in both directions, and tuck structure was superior to float in recovery. In the analysis of clothing pressure, 'Plain-Float' structured fabrics showed a higher clothing pressure than 'Plain' and the clothing pressure value of 'Plain-Tuck' was lower than that of 'Plain'. As for the correlation between fabric appearance, stretch property, and clothing pressure, the appearance change in course direction had a major influence on the clothing pressure. The shrinkage of appearance led to a decrease in stretch and an increase in clothing pressure.

• Atmosphere
• /
• v.31 no.3
• /
• pp.283-294
• /
• 2021

An Observing System Experiment (OSE) using Global Ocean Data Assimilation and Prediction System (GODAPS) was conducted to evaluate the assimilation impact of Argo floats, deployed by National Institute of Meteorological Sciences/Korea Meteorological Administration (NIMS/KMA), in marginal seas around Korean peninsula. A data denial experiment was run by removing Argo floats in the Yellow Sea and the East Sea from an operational run. The assimilation results show that Argo floats bring the positive impact on the analysis of ocean internal structure in both Yellow Sea and East Sea. In the East Sea, overall positive impact in the water temperature and salinity context is found, especially outstanding improvement from 300 to 500 m depth. In the Yellow sea, the assimilation impact on water temperature and salinity is also large within 50 m depth, especially greater impact than the East Sea in salinity. However, in the Yellow Sea, the influence of Argo floats tends to be restricted to the vicinity of Argo floats, because there was only one Argo float in the middle of the Yellow Sea during the experiment period. Given that the only limited number of Argo floats generally contribute in a positive way to the improvement of the GODAPS, further progress could be expected with adding more observations from Argo floats to current observing systems.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.5
• /
• pp.85-95
• /
• 2021

Structure design sensitivity was evaluated using the orthogonal array experimental method for passive-type deck support frame (DSF) developed for float-over installation of the offshore plant. Moreover, approximation characteristics were also reviewed based on various meta-models. The minimum weight design of the DSF is significantly important for securing both maneuvering performance and buoyancy of a ship equipped with the DSF and guaranteeing structural design safety. The performance strength of the passive type DSF was evaluated through structure analysis based on the finite element method. The thickness of main structure members was applied to design factors, and output responses were considered structure weight and strength performances. Quantitative effects on the output responses for each design factor were evaluated using the orthogonal array experimental method and analysis of variance. The optimum design case was also identified from the orthogonal array experiment results. Various meta-models, such as Chebyshev orthogonal polynomial, Kriging, response surface method, and radial basis function-based neural network, were generated from the orthogonal array experiment results. The results of the orthogonal array experiment were validated using the meta-modeling results. It was found that the radial basis function-based neural network among the meta-models could approximate the design space of the passive type DSF with the highest accuracy.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.3
• /
• pp.183-191
• /
• 2021

A time-series variation of temperature, salinity, and underwater sound speed was analyzed using an Array for Real-time Geostrophic Oceanography (ARGO) float which autonomously collects temperature and salinity for about 10month with 2 days cycle among 12 floats in the center of the Yellow Sea. As a result, the underwater sound channel appeared below the thermocline as the surface sound channel, which is dominant in the winter season, reduced in April. Besides, for a certain time in the spring season, the sound ray reflected the sea surface frequently due to the short-term temperature inversion effect. Based on the case of successful observation of ARGO float in the shallow water, using prolonged monitoring unmanned platform may contribute to predicting sound transmission loss if the temperature inversion and sound channel including background environment focusing are investigated in the center of the Yellow Sea.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1B
• /
• pp.81-87
• /
• 2010

On the SSang-chi gauging station, the discharge had been measured by the rod float method for the past twelve years. However the shifts of the rating curves are too big to be accepted. The major factors of rating curve variation were reviewed for shift analysis. To estimate the discharge measured by rod float method, two cross sections and their stages are generally required. But, the rating curves had been derived only with the observed depth of gauging station since the cross sections were not available. To correct the errors, the reference rating curve was developed. In this study, the water surface slopes of the curve were simulated by RMA2 model. The historical rating curves were re-developed by the calculated discharges on the base of the water surfaces. The results show that the range of fluctuation decreased and rating curves in recent years are physically reasonable.

• The Journal of Internal Korean Medicine
• /
• v.13 no.1
• /
• pp.61-69
• /
• 1992

In Nan-Gyung, showed that could know the lung condition taking pulse with the weight of three beans, the heart condition taking pulse with the weight of six beans, the spleen condition taking pulse with the weight of nine beans, the liver condition taking pulse with the weight of twelve beans, the kidney condition pressing to bone(骨). This theory is first suggested in Nan-Gyung(難經). In those case, the weight of three, six, nine, twelve beans and pressing to bone don't mean not the real weight but the relative weight(輕重) of taking pulse(按脈). In other words, those represent Boo Jung Chin(浮中沈), which are the conception of the upper, the meddle, the lower part(上中下). So, we could take pulse of the heart and the lung condition in Boo(浮), the spleen condition in Jung(中), and the liver and the kidney condition in Chim(沈). The heart and the lung pulse showed in the Boo(float level) must be seen with Boo-Mack(부맥 : float pulse), the liver and the kidney pulse showed in Chim (sinklevel) must be seen also with Chin-Mack(沈脈 : sink pulse). The result of the method of taking pulse of viscera with relative weight focused on the as pect of mornal pulse(平脈) and disease pulse(病脈) of five viscera in Mack-Gyung publeshed later than Nan-Gyung and special works which made a comprehensive survey the result is as follow. 1. In normal pulse of five viscera, the heart and the lunk pulse were shown with Boo-Mack(浮脈:float pulse) as the central figure, the liver's and the kidney's pulse were shown centering around Chim-Mack(沈脈: sink pulse) and the spleen's pulse was shown with Wan-Mack(緩脈) which is vital force of stomach(胃氣) and seen in only middle part. 2. In disease pulse of five viscera, frequently, the heart and the lung pulse was shown as Chim-Mack(sink pulse), the liver and the kidney pulse was seen as Boo-Mack (float pulse). 3. In the case of normal pulse. the method of taking pulse with relative weight in Nan-Gyung agree with the normal pulse of five viscera in Mack-Gyung. But in the case of disease pulse, they didn't correspond with the other. 4. So the method of taking pulse with relative weight in Nan-Gyung is not the exam pulse which ca be used in the clinical diagnosis but one of the feeling pulse way to bring in the conception of location of the visceras. 5. From now on, the method of taking pulse rdlated to relative weight need to be looked into minutely compared with later physician's theory than Mack-Gyung.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.9 no.4
• /
• pp.204-211
• /
• 2004

Autonomous profiling CTD floats are a useful tool for observing the oceans. We, however, cannot perform post-deployment calibration of the CTD's attached to the floats, and the assessment of the accuracy and stability of the profile data from the floats is one of the important issues in the delayed mode quality control of the profiles. Variations in salinity in the intermediate level of East Sea is comparable to the accuracy of salinity data required by the international Argo Program, which is 0.01. Therefore, we can assess the credibility of salinity data from the floats deployed in the East Sea using three independent methods while considering the East Sea as a salinity calibration bath. The methods utilized here are 1) comparison of high quality CTD data and float data obtained at similar locations at similar time, 2) comparison of float data obtained at similar locations at similar time, and 3) investigation of long term stability and accuracy of salinity data from parking depths. All three methods show that without any calibration, the salinity data satisfy the accuracy criterion by the Argo Program. While assuming that the intermediate level temperature in the East Sea is as homogeneous as the salinity, we have applied the three methods to temperature data. We found that the accuracy of temperature reading is 0.01$^{\circ}C$, which is about twice larger than the requirement by the Argo Program, 0.005$^{\circ}C$. This does not mean that the temperature readings are inaccurate, because the intermediate level temperature does vary spacially and temporally more than the accuracy interval required by the Argo Program. If we take into account the variation in the intermediate level temperature, the accuracy of temperature data from the floats is not significantly different from that proposed by the Argo Program. Therefore, one could use both temperature and salinity profiles from the floats assessed in this study without calibration.