• 대한전자공학회논문지
• /
• 제13권3호
• /
• pp.1-6
• /
• 1976

이 논문에서는 Boolean difference를 이용하여 combinational 및 sequential 논리회로에서 발생하는 기능적인 고장에 대한 test pattern을 얻는 방법을 연구하였다. 이 방법은 test pattern을 얻고자 하는 회로의 Boolean 함수의 Boolean difference를 계산하므로써 체계적으로 test pattern을 얻는 절차를 보여주고 있다. 컴퓨터에 의한 실험결과에 의하며 이 방법은 combinational 회로 및 asynchronous sequential 회로에 적합하며, clock이 있는 flip flop을 적당히 모형화함으로서 이 방법을 synchronous sequential회로에도 적용할 수 있음이 입증되었다. In this paper, a method of test pattern generation for the functional failure in both combinational and sequentlal logic networks by using exterded Boole an difference is proposed. The proposed technique provides a systematic approach for the test pattern generation procedure by computing Boolean difference of the Boolean function that represents the Logic network for which the test patterns are to be generated. The computer experimental results show that the proposed method is suitable for both combinational and asynchronous sequential logic networks. Suitable models of clocked flip flops may make it possible for one to extend this method to synchronous sequential logic networks.

• 전기전자학회논문지
• /
• 제9권2호
• /
• pp.152-160
• /
• 2005

프리스케일러는 PLL을 이용한 주파수합성기의 동작속도를 좌우하는 중요한 구성블록으로써, 고속 동작 특성과 저전력 소모 특성을 동시에 만족해야 한다. 따라서 프리스케일러에 사용되는 D-플립플롭의 설계가 중요하다. 기존의 TSPC D-플립플롭은 출력단의 글리치나 비대칭적인 전파지연시간, 클럭의 프리차지구간에서 내부노드의 불필요한 충 방전으로 인해 소비전력이 증가하는 단점이 있다. 본 논문에서는 이러한 단점을 개선한 새로운 동적 플립플롭을 제안하였다. 제안한 플립플롭은 방전억제방식을 사용하여 글리치를 최소화하였고, 대칭적 전파지연시간을 만들어줌으로써 속도를 향상시켰으며, 불필요한 방전을 제거하여 저전력 특성을 얻을 수 있었다. 제안된 플립플롭의 성능평가를 위해 $0.18{\mu}m$ CMOS 공정변수를 이용하여 128/129 분주 프리스케일러를 구성한 결과 최대 5GHz까지 동작 하였으며, 이는 같은 조건에서 4.5GHz까지 동작하는 기존의 회로에 비해 향상된 결과이다. 또한 4GHz에서 전력소모가 0.394mW로 기존구조에 비해 약 34%의 전력소모를 줄일 수 있다.

• 한국산업정보학회논문지
• /
• 제19권6호
• /
• pp.33-41
• /
• 2014

본 논문에서는 QCA(quantum-dot cellular automata) 클록킹(clocking) 방식의 D 플립 플롭의 구조를 제안하고, 이를 이용하여 프로그램 가능한 양자점 셀(programmable quantum-dot cell: QPCA) 구조를 설계한다. 기존의 QCA 상에서 제안된 D 플립플롭은 클록 펄스의 신호로 동작을 수행하기 때문에 이에 대한 입력 값을 임의로 설정해야 하고, QCA 클록킹과 중복되어 사용하기 때문에 낭비되는 출력 값들이 존재했다. 이러한 단점을 개선하기 위해서 이진 배선과 클록킹 기법을 이용하여 새로운 형태의 D 플립플롭을 제안하고, 이를 이용하여 QPCA 구조를 설계한다. 이 구조는 입력을 제어하는 배선 제어 회로, 규칙 제어 회로, D 플립플롭, 그리고 XOR 논리 게이트로 구성된다. 설계된 QPCA 구조는 QCADesigner를 이용하여 시뮬레이션을 수행하고, 그 결과를 기존의 D 플립플롭을 이용하여 설계한 것과 비교 분석하여 효율성을 확인한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.392-395
• /
• 1999

The state assignment for a finite state machine greatly affects the delay, area, and testabilities of the sequential circuits. In order to minimize the dependencies among state variables, therefore possibly to reduce the length and number of feedback cycles, a new state assignment technique based on m-block partition is introduced in this paper. After the completion of state assignment and logic synthesis, partial scan design is performed to choose minimal number of scan flip-flops. Experiment shows drastic improvement in testabilities while preserving low area and delay overhead.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.179-182
• /
• 2006

This paper introduce a different-type voltage-controlled oscillator (VCO) for PLL frequency synthesizer, And also the architecture of a high speed low-power-consumption CMOS dual-modulus frequency divider is presented. It provides a new approach to high speed operation and low power consumption. The proposed circuits simulate in 0.35 um CMOS standard technology.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제3C권6호
• /
• pp.220-223
• /
• 2003

In this paper, a new frequency-to-digital converter without an analog element is proposed. The proposed circuit consists of pulse-shrinking elements, latches and D flip-flops, and the operation is based on frequency comparison by the pulse-shrinking element. In the proposed circuit, the resolution of digital output can be easily improved by increasing the number of the pulse-shrinking elements. The FDC performance is improved in viewpoints of operating speed and chip area. In designed FDC, error of frequency-to-digital conversion is less than 0.1 %.

• 대한전기학회논문지
• /
• 제32권11호
• /
• pp.404-416
• /
• 1983

This paper is concerned with the design automation of the sequential machines. The operations of sequential machine can be diveded into two types such as synchronous and asynchronous sequential machine and their realization is treated in separate mode. But, in order to integrate logic circuits in high volume, mixed mode sequential machine uses common circuitry that consists of gates and flip-flops. Proposed sequential machine can be designed by several method, which are hard-wired implementation, firmware realization by PLA and ROM. And then onr example shows the differnces among three design mothods. Finally, computer algorithm(called MINIPLA) is discussed for various application of mixed-mode sequential machine.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.668-671
• /
• 2003

A concept of deadlock point of fuzzy sequential circuit is proposed. There are six cases of fuzzy sequential circuits of 1 state and 1 input variables with deadlock points. Examples of each case are shown both in a form of characteristic equation and in a graphical illustration. As fuzzy sequential circuit with 1 state and 1 input variables, D and T fuzzy flip-Hops are also characterized using the proposed concept. Thus one of the four types of D fuzzy Hip-Hops and T fuzzy Hip-flop have a deadlock point 1/2.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권4호
• /
• pp.1232-1245
• /
• 2021

In this study, prediction of product sales as they relate to changes in temperature is proposed. This model uses long short-term memory (LSTM), which has shown excellent performance for time series predictions. For verification of the proposed sales prediction model, the sales of short pants, flip-flop sandals, and winter outerwear are predicted based on changes in temperature and time series sales data for clothing products collected from 2015 to 2019 (a total of 1,865 days). The sales predictions using the proposed model show increases in the sale of shorts and flip-flops as the temperature rises (a pattern similar to actual sales), while the sale of winter outerwear increases as the temperature decreases.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권1호
• /
• pp.11-22
• /
• 2016

Clock skew scheduling is one of the essential steps to be carefully performed during the design process. This work addresses the clock skew optimization problem integrated with the consideration of the inter-dependent relation between the setup and hold times, and clock to-Q delay of flip-flops, so that the time margin is more accurately and reliably set aside over that of the previous methods, which have never taken the integrated problem into account. Precisely, based on an accurate flexible model of setup time, hold time, and clock-to-Q delay, we propose a stepwise clock skew scheduling technique in which at each iteration, the worst slack of setup and hold times is systematically and incrementally relaxed to maximally extend the time margin. The effectiveness of the proposed method is shown through experiments with benchmark circuits, demonstrating that our method relaxes the worst slack of circuits, so that the clock period ($T_{clk}$) is shortened by 4.2% on average, namely the clock speed is improved from 369 MHz~2.23 GHz to 385 MHz~2.33 GHz with no time violation. In addition, it reduces the total numbers of setup and hold time violations by 27.7%, 9.5%, and 6.7% when the clock periods are set to 95%, 90%, and 85% of the value of Tclk, respectively.