• 한국멀티미디어학회논문지
• /
• 제24권11호
• /
• pp.1538-1551
• /
• 2021

The current drone flight plan creation creates a flight path point of two-dimensional coordinates on the map and sets an arbitrary altitude value considering the altitude of the terrain and the possible flight altitude. If the created flight path is a simple terrain such as a mountain or field, or if the user is familiar with the terrain, setting the flight altitude will not be difficult. However, for drone flight in a city where buildings are dense, a safer and more precise flight path generation method is needed. In this study, using high-precision spatial information, we construct a drone safety flight map with a 3D grid map structure and propose a flight path search algorithm based on it. The safety of the flight path is checked through the virtual drone flight simulation extracted by searching for the flight path based on the 3D grid map created by setting weights on the properties of obstacles and terrain such as buildings.

• 제어로봇시스템학회논문지
• /
• 제12권11호
• /
• pp.1130-1137
• /
• 2006

Relaxed Static Stability(RSS) concept has been applied to improve aerodynamic performance of modern version supersonic jet fighter aircraft. Therefore, the flight control systems are necessary to stabilizes the unstable aircraft and provides adequate handling qualities. The initial production flight control system are verified by flight test and it's always an elements of danger because of flight-critical nature of control law function and design error due to model base design method. These critical issues impact to flight safety, and it could be lead to a loss of aircraft and pilot's life. Therefore, development of an easily modifiable RFCS(Research Flight Control System) capable of reverting to a PFCS(Primary Flight Control System) of reliable control law must be developed to guarantee the flight safety. This paper addresses the concept of SSWM(Software Switching Mechanism) using the fader logic such as TFS(Transient Free Switch) based on T-50 flight control law. The result of the analysis based on non-real time simulation in-house software using SSWM reveals that the flight control system are switching between two computers without any problem.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.519-524
• /
• 2003

In this report, a longitudinal adaptive flight control law is presented for the automatic landing system of a Japanese automatic landing flight experiment vehicle (ALFLEX). The longitudinal adaptive flight control law is designed to track an output of the vehicle to a guidance signal from the guidance portion of the automatic landing system. The proposed adaptive control law in the attitude control portion adjusts the controller gains continuously online as flight conditions change, in spite of the existence of unmodeled dynamics. The number of the controller gains to be adjusted is decreased to 1/2 from the previous studies. Computer simulation involving six-degree-of-freedom (DOF) nonlinear flight dynamics is performed to examine the effectiveness of the proposed adaptive control law. In order to verify the influence of the dispersion of the initial conditions, the Monte Carlo simulation is also applied. The initial conditions are more widely dispersed than the previous studies. As a result, except under the unsuitable initial conditions, the ALFLEX successfully landed on the runway.

• 제어로봇시스템학회논문지
• /
• 제13권7호
• /
• pp.694-702
• /
• 2007

The SSWM(Software Switching Mechanism) of I-processor concept using non-real time in-house software simulation program is an effective method in order to develop the flight control law in desktop or HQS environment. And, this system has some advantages compare to HSWM(Hardware Switching Mechanism) such as remove the time delay effectiveness and reduce the costs of development. But, if this system loading to the OFP(Operational Flight Program), the OFP guarantee the enough throughput in order to calculate the two control law at once. Therefore, the HSWM(Hardware Switching Mechanism) of 2-processor concept is necessary. This paper addresses the concept of HSWM of the HQS-PC interface using TCP/IP(Transmission Control Protocol/Internet Protocol) communication based on flight control law of advanced supersonic trainer. And, the fader logic of TFS(Transient Free Switch) and stand-by mode of reset '0' type are designed in order to reduce the abrupt transient response and minimize the integrator effect in pitch axis. The result of the analysis based on HQS pilot simulation using HSWM reveals that the flight control systems are switching between two computers without any problem.

• 항공우주시스템공학회지
• /
• 제9권1호
• /
• pp.12-18
• /
• 2015

The inter-conversion between different control laws in flight has a lot of risk. The SWM(Switching Mechanism) including logic and stand-by mode is designed to analyze the transient response of aircraft during inter-conversion between different control laws, based on the in-house software for non-real-time and real-time simulation. The SWM applies the fader logic of TFS(Transient Free Switch) to minimize the transient response of an aircraft during the inter-conversion, and applies the reset '0' type of the stand-by mode to prevent surface saturation due to integrator effect in the disengaged flight control law. The transition time is also important to minimize the objectionable transient response in the inter-conversion, as well as the transition control law design. This paper addresses the results of non-real-time simulation for the characteristics of transient response to different transition time to select the adequate transient time, and the real-time pilot evaluation, using SSWM(Software Switching Mechanism) and HSWM(Hardware Switching Mechanism), which is met for Level 1 flying qualities and assures safety of flight.

• 한국항공우주학회지
• /
• 제47권4호
• /
• pp.266-273
• /
• 2019

다수의 소형 정찰용 무인항공기를 이용하여 탐색 및 정찰 임무를 수행하는데 있어서 무인항공기의 운용 대수, 비행고도 등 운용 조건에 따라 임무 수행의 효율성과 효과성은 크게 변경될 수 있다. 하지만 어떤 운용조건이 가장 합리적인지 판단하기는 쉽지 않다. 따라서 본 연구에서는 자율비행에 따라 충돌을 회피하면서 표적을 탐지 및 판별할 수 있는 무인항공기 비행 시뮬레이션을 개발하여 다수의 무인항공기 운용 시 보다 효과적이고 효율적인 운용조건을 도출할 수 있는 방안을 제시하였다.

• 대한전자공학회논문지
• /
• 제24권4호
• /
• pp.559-567
• /
• 1987

In this paper, the real time simulation of continuous dynamic system was performed by general integration algorithms using multiprocessor. For the stable simulation, the relation between stability of integration method and integration step-size was investigated from the stability graph. As a typical illustration, the real-time digital simulation and the real-time hard-ware-in-the-loop simulation of flight control system were performed and reviewed. Moreover through the real-time simulation, the design verification and performace test of flight control system could be evaluated. The computer used for simulation is AD10, which is a very high-speed special-purpose computer designed specifically for a time-critical simulation of large and complex models of dynamic systems. The simulation validity is demonstrated by comparing hardware simulation results with software simulation results.

• 한국항공운항학회지
• /
• 제19권4호
• /
• pp.1-5
• /
• 2011

The free-wing tilt-body aircraft is researched in the flight performance characteristics for center of gravity (CG) change. All of speed, body tilt angle and center of gravity change are simulated to determine the flight envelope by a non-linear 3-DOF mathematical model. In flight, this aircraft configuration changes by the tiltable empennage. Then, flight dynamics distinguishes from those of a conventional fixed-wing aircraft. Though flight performance and trimmability are studied by CG change, the flight model of free-wing tilt-body aircraft is to reduce the hidden risk and to achieve the successful flight test. It is analyzed the flight characteristics by CG change that distinguishes free-wing tilt-body aircraft from the conventional aircraft.

• 제어로봇시스템학회논문지
• /
• 제5권2호
• /
• pp.237-247
• /
• 1999

Flight parameters of a light aircraft in normal category named ChangGong-91 we identified from flight tests. Modified Maximum Likelihood Estimation (MMLE) is used to produce aerodynamic coefficients, stability and control derivatives. A Flight Training Device (FTD) has been developed based on the identified flight parameters. Flat earth, rigid body, and standard atmosphere are assumed in the FTD model. Euler angles are adapted for rotational state variables to reduce computational load. Variations in flight Mach number and Reynolds number are assumed to be negligible. Body, stability and inertial axes allow 6 second-order linear differential equations for translational and rotational motions. The equations of motion are integrated with respect to time, resulting in good agreements with flight tests.

• 한국항공운항학회지
• /
• 제7권1호
• /
• pp.19-29
• /
• 1999

This paper proposes a system intergration method for M20J flight simulator development. The simulator consists of three modules. The first module is for flight dynamics simulation, and the second module is for avionic systems and flight instrument and the last module is for interface card which connects PC and input devices using rotary encoders and switches. Two computers are equipped in the simulator for instructor and trainee. An instructor can give a mission to a trainee, and control the flight simulation options through RS-232C serial port. Also, the instructor can monitor the training results of the trainee.