• 한국항행학회논문지
• /
• 제10권4호
• /
• pp.299-305
• /
• 2006

두루미-II는 다목적 Test bed 항공기로서 개발되었으며, 일반적인 항공기의 비행동역학을 만족한다. 두루미-II의 비행시험 자료를 획득하기 위한 시스템이 탑재되어 있으며, 자동비행이 가능하도록 설계되었다. 본 연구에서는 두루미-II 조종시스템의 작동 순서를 설명한다. 분할된 조종면과 비행시험을 위해 요구되는 프로그램을 설명한다. 또한, 새로운 방법을 통한 정확한 조종입력을 인가하는 방법을 설명한다. 새로운 조종입력을 통한 비행시험 결과를 해석한다.

• 한국군사과학기술학회지
• /
• 제17권4호
• /
• pp.430-435
• /
• 2014

This paper presents the case study of the airworthiness certification for the flight control system of tactical UAV. Airworthiness regulations for flight characteristics and design and construction based on the STANAG 4671 are selected, and safety assessment is performed. Stall protection on wing level and turning flight criteria, and flap interconnection system failures were analyzed and applied to the flight control system design. The Hardware-in-the-loop simulation including math model, integrated system verification and validation test and failure mode and effects test were also performed and they are used to validate the means of compliance of the proposed airworthiness.

• 시스템엔지니어링학술지
• /
• 제1권2호
• /
• pp.43-48
• /
• 2005

This paper describes the results of applying States and Modes Analysis, one of the requirements analysis techniques, to the development requirements of flight control software for Smart UAV. State/mode table enabled us to investigate various operation and design concepts, and as a result essential requirements for flight control software were established without omitting necessary requirements. Through the use of scenario-specific state transition diagrams, dynamic behaviours and control/response interfaces between each state and mode could been clearly identified, which made it possible to establish requirements related to dynamic behaviours of states and modes which are essential to the design of flight control software.

• International Journal of Internet, Broadcasting and Communication
• /
• 제10권2호
• /
• pp.13-18
• /
• 2018

Drones are controlled by the remote pilot from the ground stations using the radio control or autonomously following the pre-programmed flight plans. In this paper, we develop a method and an optimal path search system for providing 3D augmented reality flight (ARF) images for safe and efficient flight control of drones. The developed system consisted of the drone, the ground station and user terminals, and the optimal path search server. We use the Dijkstra algorithm to find the optimal path considering the drone information, flight information, environmental information, and flight mission. We generate a 3D augmented reality flight (ARF) image overlaid with the path information as well as the drone information and the flight information on the flight image received from the drone. The ARF image for adjusting the drone is generated by overlaying route information, drone information, flight information, and the like on the image captured by the drone.

• 제어로봇시스템학회논문지
• /
• 제13권10호
• /
• pp.927-932
• /
• 2007

The sophisticated mathematical model is required for the design and the database construction of the advanced flight control system of UAV. In this paper, flight test of KARI's research UAV, often called DURUMI-II, is implemented for the data acquisition from the maneuver flight. The flight path reconstruction is implemented to ensure that the measured data is consistent and error free. The nonlinear system identification for the refined mathematical modeling is implemented with the verified measurements from the flight path reconstruction. The simulation with the identified results have a good validation when the simulated responses were compared to the flight tested data.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.463-467
• /
• 2005

In this paper, the guidance law applicable to formation flight of UAV in three-dimensional space is proposed. The concept of miss distance, which is commonly used in the missile guidance laws, and Lyapunov stability theorem are effectively combined to obtain the guidance commands of the wingmen. The propose guidance law is easily integrated into the existing flight control system because the guidance commands are given in terms of velocity, flight path angle and heading angle to form the prescribed formation. In this guidance law, communication is required between the leader and the wingmen to achieve autonomous formation. The wingmen are only required the current position and velocity information of the leader vehicle. The performance of the proposed guidance law is evaluated using the complete nonlinear 6-DOF aircraft system. This system is integrated with nonlinear aerodynamic and engine characteristics, actuator servo limitations for control surfaces, various stability and control augmentation system, and autopilots. From the nonlinear simulation results, the new guidance law for formation flight shows that the vehicles involved in formation flight are perfectly formed the prescribed formation satisfying the several constraints such as final velocity, flight path angle, and heading angle.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.785-788
• /
• 2009

비행자료 처리시스템은 항공기 관제를 위한 모든 비행관련 자료를 처리하고 관리하며 항적 모델링을 하기 위한 시스템으로 항공관제용 통합 정보처리 시스템의 핵심 기능을 수행하는 역할을 담당한다. 항공기의 안전한 운항을 위해서는 비행자료 처리를 통해 항공교통관제기관간의 정보전달과 교환은 필수적인 요소이다. 따라서 본 논문에서는 비행자료 처리시스템의 개발을 위해 기능을 분석하고, 설계 시 필요한 고려사항을 살펴보고자 한다.

• 한국항공우주학회지
• /
• 제42권11호
• /
• pp.968-973
• /
• 2014

유무인 겸용 비행체인 OPV는 무인기 개발방법 중의 하나로 기존 유인기 운용을 통해 검증된 유인 비행체와 엔진 및 각 계통을 유지하며, 무인기 운용을 위해 필요한 부가 시스템을 장착하고, 필요에 따라 기존시스템을 수정하여 개발비용과 시간을 줄일 수 있는 장점을 가지고 있다. 또한 임무 및 비행조건에 따라 유인기와 무인기로 겸용하여 운용할 수 있는 장점을 가지고 있으며, 퇴역하는 유인기를 재활용하는 측면에서도 국가의 중요재원을 효율적으로 활용할 수 있는 시스템이다. 본 논문에서는 국내 최초로 개발한 고정익 OPV 비행체의 자동비행조종시스템을 중심으로 초기 중요 개발개념과 기술적 고려사항 들을 정리하였다.

• 제어로봇시스템학회논문지
• /
• 제17권8호
• /
• pp.833-842
• /
• 2011

The objectives of this research are development of guidance, navigation and control system for RUAV on virtual instrumentation and real flight test. For this research, the system is divided to DAQ (data acquisition) section, actuator section and controller section. And the hardware and software on each sections are realized on LabVIEW base. Waypoint guidance and control of auto flight are realized using PID gain tuning and waypoint vector tracking guidance algorism. For safe flight test, auto/manual switching module isolated from FCS (Flight Control System) is developed. By using the switch module, swift mode change was achieved during emergency flight case. Consequently, a meter level error of flight performance is achieved.

• 항공우주시스템공학회지
• /
• 제13권2호
• /
• pp.1-9
• /
• 2019

본 논문에서는 고고도 장기체공 무인항공기의 임무 비행을 위한 방향축 유도, 제어 알고리즘에 대해 기술 하였다. 먼저 방향축 제어 알고리즘은 임무 기간 중 무인항공기가 전진비행을 할 수 없을 맞바람에 대해 제어 변수를 전환하는 알고리즘을 설계하였다. 유도법칙은 항로점 비행을 위해 Fly-over, Fly-by, Hold 속성에 대한 각각의 알고리즘을 적용하였다. 무인항공기의 비선형 시뮬레이션을 통해 각 유도, 제어 알고리즘의 설계 결과를 확인하였다. 본 연구는 설계 결과를 토대로 실제 임무 비행을 수행하는 것을 목적으로 한다. 따라서 본 연구 내용을 기반으로 비행 시험을 통해 설계한 유도 제어 알고리즘의 비행 운용성을 확인하였다.