• 한국항공운항학회지
• /
• 제29권3호
• /
• pp.66-75
• /
• 2021

As the domestic aviation industry develops, demand for pilots is increasing. As a result, the demand for flight training using flight simulation training devices that implement the same or similar interior of aircraft is also increasing. Despite this increase in demand, domestic laws, regulations and management systems related to flight simulation training devices have remained unchanged since 2009. As a result, the criteria for designation of new or developed flight simulation training devices are ambiguous. In addition, proper improvement of the current system should be prioritized for designation of new devices such as UAM and VR, along with developing flight simulation training devices. It is intended to present measures to improve the domestic flight simulation training system by investigating and analyzing advanced cases overseas.

• 한국항공운항학회지
• /
• 제26권4호
• /
• pp.129-141
• /
• 2018

In this paper, two different flight training devices were constructed to verify the effectiveness of a pilot training system based on a Virtual Reality Head Mount Display. VFR Flight Procedure and IFR Flight Procedure were conducted by high level pilots with Commercial Pilot Licence. Flight data and pilot's visual data for each flight procedure were extracted, compared and analyzed with two training systems. Finally, the effectiveness of the training systems based on the VR HMD was demonstrated by assessing the given mission and the flight results.

• 한국항공운항학회지
• /
• 제29권3호
• /
• pp.117-121
• /
• 2021

The Multi-crew Pilot License (MPL) is a new pilot qualification introduced by ICAO to train co-pilots for transport aircraft based on efficient and stable competency to respond to changes in the operating environment and technology. ICAO and the European Union Aviation Safety Agency (EASA) require a minimum flight of 240 hours for MPL qualification training, and allow the use of flight simulation training devices (FSTDs) for most of the training, specifying the performance requirements for FSTDs. As South Korea is also preparing for the operation of the MPL training program, it is essential to establish the operating standards for FSTDs required for MPL training. This study aims to identify the international standards for FSTDs related to MPL training, and to compare them with the current operating standards for FSTDs in South Korea for presenting a standard (draft) that can be used when introducing domestic MPL training programs in the future.

• 문화기술의 융합
• /
• 제8권3호
• /
• pp.477-483
• /
• 2022

비행 시뮬레이터는 조종사들이 다양한 상황에 능숙하게 대처하고 비행감을 느낄 수 있도록 해주는 장치로 현대 항공 분야에서 과학화 훈련에 관한 관심이 증가함에 따라 항공 훈련기관에서는 시뮬레이터를 개발 및 운용하는 사례가 증가하고 있다. 이에 본 연구에서는 상용 비행 시뮬레이터 프로그램과 모션 프로그램을 활용하여 모션 기반 헬리콥터 시뮬레이터를 개발하는 과정에 관하여 기술하였다. 연구 과정에서 선행연구를 통하여 헬리콥터 비행교육의 특수성과 모션 시뮬레이터의 긍정적인 효과를 확인하였으며, 모의비행훈련장치에 대한 구성과 현행 규정을 파악하고 헬리콥터 모션 시뮬레이터를 개발하는 과정에서 모션 시스템의 설계와 프로그램에 관하여 연구하였다. 시뮬레이터의 시스템 설계와 구조설계를 바탕으로 모션 프로그램을 설정하고 비행 시뮬레이터로부터 수신되는 데이터를 식별하여 예상 작동 형상을 확인하였다. 우리는 본 연구를 통해 모션 기반 헬리콥터 시뮬레이터를 완성하여 조종사 훈련에 긍정적인 기대효과를 마련하고자 한다.

• 한국항행학회논문지
• /
• 제27권1호
• /
• pp.23-35
• /
• 2023

증거기반훈련(EBT)은 고속화되고 대형화되는 항공운송시장의 안전 운항을 위해, 실제 항공기 사고, 준사고, 운항, 훈련 데이터(Evidence)를 기반으로 조종사의 역량(Competency) 및 자신감(Confidence)을 향상하고 문제해결을 위한 회복력(Resilience)을 강화하는 훈련·평가 프로그램이다. 이러한 증거기반훈련(EBT)을 전문교육기관의 교육 체계에 적용하고 문제점을 개선하기 위해, 현재의 평가 기준에서 EBT의 핵심역량을 적용한 평가 기준으로의 개선과 실기시험관 및 교관 표준화를 위한 제도 개선, 모의비행훈련장치의 활용이라는 3가지 개선방안을 제시하였다.

• 한국항공운항학회지
• /
• 제32권2호
• /
• pp.11-19
• /
• 2024

Flight simulators are crucial devices for aircraft piloting training and simulation, requiring regular inspections to maintain performance and operational quality. This study explores the development of an automated inspection system for flight simulators to automate quality inspections of control loading systems (CLS). While quality inspection of the control loading system (CLS) is essential for flight simulators, manual inspections are common practice. To address this, we developed an Auto Qualification Test Guide (Auto QTG) using artificial control logic and sensor data and applied it to the militarily simulator. Experimental results demonstrate that Auto QTG successfully automates quality inspections of CLS, enhancing accuracy and efficiency. This automated inspection system is expected to contribute to improving the operation and maintenance of flight simulators.

• 한국항공우주학회지
• /
• 제44권12호
• /
• pp.1035-1042
• /
• 2016

상용 비행시뮬레이션 게임 엔진 X-Plane을 이용하여 구성한 비행시뮬레이터에 대해 FTD level 5를 만족시킬 수 있는 QTG작성에 대해 연구하였다. 모델은 Cirrus사(社)의 SR-20을 대상으로 하였다. QTG의 테스트항목 중에는 조종반력을 측정하는 항목도 있다. 따라서 Brunner사(社)의 CLS(Control Loading System)을 조종 장치에 설치하여 조종반력을 측정할 수 있도록 구성하였다. X-Plane은 자체적으로 트림루틴을 제공하지 않으므로 외부에서 Autopilot을 구성하여 항공기가 트림상태에 도달할 수 있도록 하였다. 또한 테스트를 자동으로 수행할 수 있는 알고리듬을 개발하여 수동으로 조종하여 테스트하는 번거로움을 피하고 같은 테스트를 같은 조건으로 진행할 수 있도록 하였다. FTD Level 5의 경우 실제 비행데이터가 아닌 alternative data source를 적용할 수 있으며 이를 활용하여 모든 테스트 결과가 주어진 범위를 만족하였다.

• 한국항공운항학회지
• /
• 제7권1호
• /
• pp.19-29
• /
• 1999

This paper proposes a system intergration method for M20J flight simulator development. The simulator consists of three modules. The first module is for flight dynamics simulation, and the second module is for avionic systems and flight instrument and the last module is for interface card which connects PC and input devices using rotary encoders and switches. Two computers are equipped in the simulator for instructor and trainee. An instructor can give a mission to a trainee, and control the flight simulation options through RS-232C serial port. Also, the instructor can monitor the training results of the trainee.

• 한국항공운항학회지
• /
• 제27권2호
• /
• pp.54-69
• /
• 2019

The primary objective of this paper is to introduce the application of Human-Machine Interface (HMI) and Augmented Reality (AR) technologies in flight operations. These include: self-check-in, baggage handling, airport security and surveillance, airport operations monitoring, In-Flight Entertainment and Connectivity (IFEC), cockpit design, and cabin crew support. This paper investigates the application status and development trends of HMI and AR technologies for airports and aircraft. These technologies can provide more efficient in-flight passenger service and experience by using AR devices. This paper also discusses the developments such as; the Integrated Control Application (ICA) for the IFEC interface, AR flight simulation training program using the fixed-based simulator, and the AR aircraft cabin interior concept test program. These applications present how HMI and AR techniques can be utilized in actual flight operations. The developed programs in this paper can be applied to their purpose within aircraft interiors and services to enhance efficiency, comfort, and experience.

• 한국항공운항학회지
• /
• 제17권4호
• /
• pp.48-54
• /
• 2009

We implemented the Aural Cueing System(ACS) system of the reconfigurable tactical trainer(RTT) for th rotor aircraft. RTT provides a collective training system to meet aviation training requirements and supports organizational training for aviations units in combined arms collective training and mission rehearsal. ACS handles the volume, pitch and repetition of the digitally stored sounds based on commands it receives from an UDP/IP. In this paper, we explained and implemented the conceptual and detail design the ACS system for the rotor aircraft such as AH-1H(Iroquios), UH-60(Blackhwak), AH-1(Cobra) etc. The conceptual design composed of the sound cueing data analysis, sound modelling which is inner, outer, weapon and warn environment of rotor aircraft, sound synthesis and replay.