• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.4
• /
• pp.116-122
• /
• 2020

Human and material resource planning is one representative example of Operations Research. Resource planning is important not only in civilian settings but also in military ones. In the Air Force, flight scheduling is one of the primary issues that must be addressed by the personnel who are connected to flight missions. However, although the topic is of great importance, relatively few studies have attempted to resolve the problem on a scientific basis. Each flight squadron has its own scheduling officers who manually draw up the flight schedules each day. While mistakes may not occur while drafting schedules, officers may experience difficulties in systematically adjusting to them. To increase efficiency in this context, this study proposes a mathematical model based on a binary variable. This model automatically drafts flight schedules considering pilot's mission efficiency. Furthermore, it also recommends that schedules be drawn up monthly and updated weekly, rather than being drafted from scratch each day. This will enable easier control when taking the various relevant factors into account. The model incorporates several parameters, such as matching of the main pilots and co-pilots, turn around time, availability of pilots and aircraft, monthly requirements of each flight mission, and maximum/minimum number of sorties that would be flown per week. The optimal solution to this model demonstrated an average improvement of nearly 47% compared with other feasible solutions.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.2
• /
• pp.63-70
• /
• 2012

The collision-free flight planning method based on the extended collision map is proposed for cooperation of multiple unmanned aerial vehicles (UAVs) in a common 3-dimensional workspace. First, a UAV is modeled as a sphere, taking its 3-D motions such as rolling into consideration. We assume that after entering the common workspace, the UAVs move along their straight paths until they depart from the workspace, and that the priorities of the UAVs are determined in advance. According to the assumptions, the collision detection problem between two spheres in $R^3$ can be reduced into the collision detection problem between a circle and a line in $R^2$. For convenience' sake and safety, the collision regions are approximated by collision boxes. Using the collision boxes, the entrance times of the UAVs are scheduled for collision avoidance among the UAVs. By this way, all UAVs can move in the common workspace without collisions with one another. For verifying the effectiveness of the proposed flight planning method, the simulation with 12 UAVs is carried out.

• Proceedings of the Korean Society for Cognitive Science Conference
• /
• 2005.05a
• /
• pp.9-13
• /
• 2005

A comprehension-based computational model of pilot action planning called ADAPT is presented to model pilot performance in a flight simulation context. Individual pilots were asked to execute a series of flight maneuvers using a flight simulator, and their eye-scanning, control movements, and flight performance were recorded in a time-synched database. Computational models of each of the 25 individual pilots were constructed, and the individual models simulated execution of the same flight maneuvers performed by human pilots. The time-synched eye-scanning, control movements, and flight performance of individual pilots and their respective models were compared to test ADAPT's predictive validity.

• Journal of Aerospace System Engineering
• /
• v.7 no.3
• /
• pp.33-38
• /
• 2013

The air data measured from the static pressure, the dynamic pressure and etc. of an airplane is used for calculation of many flight parameters(altitude and airspeed and so on) and these values applied to flight safety and navigation flight. The pitot-static system of the development airplane is calibrated by finding of pitot-static system's error using tower fly-by, trailing cone method and etc. This paper is describing for the introduction of the trailing cone method and major items for test planning, preparation, operation and results for air data calibration flight test performed, considering efficiency and safety during KC-100 development project.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.12
• /
• pp.1238-1243
• /
• 2008

This paper presents an HILS(Hardware in the Loop Simulations) based experimental study for the UAV's flight trajectory planning/generation algorithms and guidance/control laws. For the various mission that is loaded on each waypoint, proper trajectory planning and generation algorithms are applied to achieve best performances. Specially, the 'smoothing path' generation and the 'tangent orbit path' guidance laws are presented for the smooth path transitions and in-circle loitering mission, respectively. For the control laws that can minimize the effects of side wind, side slip angle($\beta$) feedback to the rudder scheme is implemented. Finally, being implemented on real hardwares, all the proposed algorithms are validated with integrations of hardware and software altogether via HILS.

• ETRI Journal
• /
• v.43 no.4
• /
• pp.580-593
• /
• 2021

When operating in confined spaces or near obstacles, collision-free path planning is an essential requirement for autonomous exploration in unknown environments. This study presents an autonomous exploration technique using a carefully designed collision-free local planner. Using LiDAR range measurements, a local end-point selection method is designed, and the path is generated from the current position to the selected end-point. The generated path showed the consistent collision-free path in real-time by adopting the Euclidean signed distance field-based grid-search method. The results consistently demonstrated the safety and reliability of the proposed path-planning method. Real-world experiments are conducted in three different mines, demonstrating successful autonomous exploration flights in environment with various structural conditions. The results showed the high capability of the proposed flight autonomy framework for lightweight aerial robot systems. In addition, our drone performed an autonomous mission in the tunnel circuit competition (Phase 1) of the DARPA Subterranean Challenge.

• Journal of Aerospace System Engineering
• /
• v.8 no.4
• /
• pp.32-38
• /
• 2014

Sufficient energy charging during a day is essential for a solar-powered long-endurance aircraft. Variations of flight path that is superior to a basic circle path are sought in this study for more efficient charging. Flight path associated with roll and pitch attitudes are investigated. It seems that the pitch angle can play more important role than the roll angle for the solar charging efficiency. Thus, more energy charging is observed when the entire flight path is tilted toward the direction of the sun.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.3
• /
• pp.214-221
• /
• 2005

For decades, airships have being developed in Europe (especially German) and America. Airships are planning to be used for advertisements and airliners as well. In Korea, KARI (Korea Aerospace Research Institute) is developing stratospheric communication airship and the similar research is carried out in Japan. Among them, Zeppelin of German has the cutting-edge airship technology with Zeppelin NT. In this paper, the flight performance and stability were evaluated by comparing mathematical theory and the real test. The stability was examined through dynamic modeling and assured by designing controllers at each flight mode. Elevator angle, rudder angle, magnitude of thrust and tilting angle of thrust vector were used as control inputs. Moreover, after measuring the airship velocity, flight direction, magnitude and direction of the wind, attitude angles and trajectories of the airship at each flight mode, the results were compared with the simulation. To get the reasonable data, low-pass filter and band-stop filter were designed to get rid of the sensor noise and engine vibration. The test was accomplished at cruise mode, turning mode, and deceleration. To conclude, with comparing the simulation data and flight test data, it could be known that the dynamic model used in this paper was reasonable.

• Journal of the Korea Convergence Society
• /
• v.8 no.6
• /
• pp.9-16
• /
• 2017

Researchers are now faced with a limited flight time of the hoverable UAV due to the sluggish technological advances of the Li-Po energy density and try to find a bypassing solution for the fully autonomous hoverable UAV mission planning. Although there are several candidate solutions, automated wireless charging is the most likely and realistic candidate and we are focusing on the autolanding strategy of the hoverable UAV in this paper since it is the main technology of it. We developed a hoverable UAV flight simulator including Li-Po battery pack simulator using MATLAB/Simulink and UAV flight and battery states are analyzed. The maximum motor power measured as 1,647 W occurs during the takeoff and cell voltage decreases down to 3.39 V during the procedure. It proves that the two Li-Po battery packs having 22 Ah and connected in series forming 12S1P are appropriate for the autolanding mission planning.

• Journal of Advanced Navigation Technology
• /
• v.28 no.1
• /
• pp.68-76
• /
• 2024

With the recent rapid growth of the domestic and international unmanned aerial vehicle (UAV) market and the increasing importance of UAV operations in urban centers, such as UAMs, the safety management and regulatory framework for human life and property damage caused by UAV failures has been emphasized. In this study, we conducted a comparative analysis of risk-cost models that evaluate the risk of an operating area for safe UAM flight path planning, and identified the main limitations of each model to derive considerations for future model development. By providing a basic model for improving the safety of UAM operations, this study is expected to make an important contribution to technical improvements and policy decisions in the field of UAM flight path planning.