• 산업기술연구
• /
• 제35권
• /
• pp.9-13
• /
• 2015

In this paper, a new excitation scheme is developed to increase the output torque of the sensorless BLDC(Brushless DC) motor(BLDCM), which drives fins to control the flight attitude of a guided artillery munition. The proposed scheme is based on a 12-step excitation strategy combining two-phase and three-phase excitations. The proposed 12-step excitation scheme can produce more torque than a typical 6-step scheme for the start-up and synchronous operation in the sensorless BLDCM drive. The simulation and experimental results on the sensorless BLDCM drive system to control the fin were verified the validity of the proposed scheme.

• 한국항공운항학회지
• /
• 제14권2호
• /
• pp.27-32
• /
• 2006

The performance-design algorithm of a liquid ramjet engine was studied, which showed the comparable results with CFD calculation except the shock-boundary layer interaction region. In addition to the description of the design algorithm, several important design parameters, such as equivalence ratio, combustion efficiency, air capturing factor, and flight Mach number, are evaluated as predicting one of performance factors, Isp, of a typical ramjet engine, so that the flight envelope might not be determined with narrow perspective performance-operation-area in off-design regime.

• Journal of Astronomy and Space Sciences
• /
• 제33권4호
• /
• pp.265-271
• /
• 2016

Interplanetary scintillation-driven (IPS-driven) ENLIL model was jointly developed by University of California, San Diego (UCSD) and National Aeronaucics and Space Administration/Goddard Space Flight Center (NASA/GSFC). The model has been in operation by Korean Space Weather Cetner (KSWC) since 2014. IPS-driven ENLIL model has a variety of ambient solar wind parameters and the results of the model depend on the combination of these parameters. We have conducted researches to determine the best combination of parameters to improve the performance of the IPS-driven ENLIL model. The model results with input of 1,440 combinations of parameters are compared with the Advanced Composition Explorer (ACE) observation data. In this way, the top 10 parameter sets showing best performance were determined. Finally, the characteristics of the parameter sets were analyzed and application of the results to IPS-driven ENLIL model was discussed.

• 한국컴퓨터정보학회논문지
• /
• 제23권1호
• /
• pp.1-7
• /
• 2018

The Korean Air Force FA-50 aircraft currently operating in the Air Force is using Ultra High Frequency (UHF) frequency communications for navigation communications with ground control stations or other aircraft. The pilot communicates by changing frequency at any time during flight, and performs communication by directly inputting from the Integrated Up-Front Controller installed in the cockpit. The frequency is designated as secret, and the pilot receives the task with the frequency channel number (001~xxx) and finds the frequency of the channel in the list of 4,000 frequency channels and inputs it manually. This reduces the safety and convenience of pilots' operations and exposes them to hazards that may occur especially during night flight missions. In this paper, we propose a function to embed the frequency corresponding to the frequency channel list in IMDC, the aircraft mission computer, and to automatically change the frequency when the pilot only inputs the channel number.

• 로봇학회논문지
• /
• 제16권3호
• /
• pp.216-222
• /
• 2021

Recently, various robots are being used for the purpose of structural inspection or safety diagnosis, and their needs are also rising rapidly. Among the structural inspection using robots, a lot of researches has recently been conducted on inspection of various facilities and structures using an unmanned aerial vehicle (UAV). However, since GNSS (Global Navigation Satellite System) signals cannot be received in an environment near or below structures, the operation of UAVs has been done manually. For a stable autonomous flight without GNSS signals, additional technologies are required. This paper proposes the autonomous flight system for structural inspection consisting of simultaneous localization and mapping (SLAM), path planning, and controls. The experiments were conducted on an actual large bridge to verify the feasibility of the system, and especially the performance of the proposed SLAM algorithm was compared through comparative analysis with the state-of-the-art algorithms.

• Journal of Positioning, Navigation, and Timing
• /
• 제10권4호
• /
• pp.253-262
• /
• 2021

Global Navigation Satellite Systems (GNSS) based precise positioning using Real Time Kinematic (RTK) technique has been proposed as an enabler of the formation operation of moving vehicles. In RTK methods, the integer ambiguity of GNSS carrier phase measurements must be resolved. Although there have been many proposed algorithms for the integer ambiguity resolution, the widelane combination of carrier phase measurements and LAMBDA methods have gained the most popularity in literatures when dual frequency GNSS measurements were used. In this paper, we evaluated five alternative methods to determine relative positions of moving base and rover receivers; the round-off scheme of widelane carrier phase, instant least-squares and Kalman filter-based LAMBDA with widelane carrier phase, instant least-squares and Kalman filter-based LAMBDA with dual frequency measurements. The paper presented the performance of each method using flight test data, which showed their strength and weakness in the aspects of time-to-first-fix, ambiguity resolution success ratio, and relative position errors. Based on that, we provided practical recommendations of RTK operations for moving vehicles.

• Mass Spectrometry Letters
• /
• 제12권1호
• /
• pp.26-30
• /
• 2021

The impurity concentration is a crucial parameter for semiconductor thin films. Evaluating the impurity distribution in silicon thin film is another challenge. In this study, we have investigated the doping concentration of boron in silicon thin film using time of flight secondary ion mass spectrometry in dynamic mode of operation. Boron doped silicon film was grown on i) p-type silicon wafer and ii) borosilicate glass using hot wire chemical vapor deposition technique for possible applications in optoelectronic devices. Using well-tuned SIMS measurement recipe, we have detected the boron counts 101~104 along with the silicon matrix element. The secondary ion beam sputtering area, sputtering duration and mass analyser analysing duration were used as key variables for the tuning of the recipe. The quantitative analysis of counts to concentration conversion was done following standard relative sensitivity factor. The concentration of boron in silicon was determined 1017~1021 atoms/㎤. The technique will be useful for evaluating distributions of various dopants (arsenic, phosphorous, bismuth etc.) in silicon thin film efficiently.

• 항공우주시스템공학회지
• /
• 제16권1호
• /
• pp.17-27
• /
• 2022

실제와 모델간의 다양한 불확실성(uncertainties)에 대한 항공기의 강건성 확보를 위해 비행제어시스템은 일정 수준 이상의 안정성 여유(stability margin) 감항기준을 만족할 수 있도록 설계되어야 한다. 미 국방 규격인 MIL-F-9490D와 감항인증 규격인 MIL-HDBK-516B에는 비행제어시스템이 만족해야 하는 이득여유(gain margin)와 위상여유(phase margin) 기준을 제시하고 있다. 그러나 항공기의 개발 단계별 설계 성숙도를 고려하지 않고 전 개발단계에서 동일한 안정성 여유 기준이 적용되면서, 궁극적으로는 항공기 운용영역이 과도하게 제한되는 문제가 발생한다. 본 논문에서는 조종성과 안정성 여유의 관계를 제시하고 개발 단계와 입증 방법에 따라 안정성 여유 기준을 재정립하는 방안을 제시한다. 연구의 결과는 현재 개발되고 있는 항공기뿐만 아니라 향후에 전개될 무인 비행체 개발 시에 적용하여 보다 유연하고 효과적인 방법으로 안정성 여유 기준을 입증하는데 기여하리라 판단한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1428-1432
• /
• 2007

One of the most important targets of transportation is to transport human and commodities to the destination safely. Railway has low risk, compared with land, ocean and flight route and it assures high security as well as high speed driving, since it runs on regular track. However, train accident may result in tragic accident due to small carelessness, so special event recorder is preferably used in order for clarity of responsibility in case of accident, maintenance of signal device and defect analysis. JRU(Juridical Recorder Unit) for ATC/ATS/ATP can be more advanced event recorder. Event recorder of KTX-I which is running now is installed one by one on each leading car and last car, and operation plan of event recorder in case of single trainset is suggested. But regarding train operation of multi-coupled trainset operation such as KTX-II, more detailed study is required for event recorder revitalization and record data process method. Therefore, this research aims at operation plan used in existing event recorder, and suggests effective operation and management plan of event recorder in multi-coupled trainset such as new High Speed Train.

• 한국항행학회논문지
• /
• 제20권6호
• /
• pp.511-518
• /
• 2016

본 연구는 RAPCON을 구성하는 구성요소를 체계별로 구분하고 체계별 운영시간 에 따른 고장율 등을 분석한다. 아울러 설계수명에 점차 도달한 RAPCON의 운영 중 발생한 유지보수비용 데이터를 토대로 남은 설계수명 기간 동안 향후 발생 가능한 유지보수 비용을 추정한다. 이런 분석결과를 통해 장비의 신뢰성 관련 선행연구들에서 주로 인용되고 있는 욕조커브 (bathtub curve) 이론과 본 연구의 비용예측 결과와의 연관성을 진단하고 안정적인 유지보수를 위한 기초자료로서 활용되고자 한다. 본 시계열 분석에 사용된 자료는 T국 공군이 구형 RAPCON을 신형으로 교체하면서, 설계수명이 다된 기존 RAPCON 운영단계에서 발생했던 50개월의 유지보수비용 데이터이다. 유지보수 비용은 6개 체계별 유지보수비용을 합한 월별 유지보수비용으로 사용하였다. ARIMA 모형을 토대로 향후 10개월 간 발생 가능한 유지보수 비용을 예측한 결과 비용이 상승할 것이라는 통계적으로 신뢰할 만한 추정 결과를 얻었다.