• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.393-403
• /
• 2022

Various studies suggest that the initial operating form of UAM, which is being presented as a solution to the urban traffic problem, will be similar to VTOL aircraft among current aircraft. In a form similar to determining the direction of the runway where fixed-wing aircraft take off and land, the vertiport where take-off and landing of VTOL aircraft takes place determines the flight direction of departure and arrival in consideration of the direction of the wind. Unlike areas where airports are generally built, in the case of downtown areas, it is expected that the characteristics of wind may continuously change depending on the environment of changing terrain or obstacles such as the construction of new buildings. In this study, long-term actual observation data for reviewing the take-off and landing directions at the city center where the location of the vertiport is expected are compared using a wind speed map, and the characteristics of the ground wind and the possibility of change in the direction of the predominant wind depending on the observation period and observation location confirmed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.29-32
• /
• 1999

Korea Multi-Purpose SATellite(KOMPSAT) is scheduled to be launched by TAURUS launch vehicle in November, 1999. Tracking, Telemetry and Command(TT&C) operation and the flight dynamics support should be performed for the successful Launch and Early Orbit Phase(LEOP) operation. After the first contact of the KOMPSAT spacecraft, initial orbit determination using ground based tracking data should be performed for the acquisition of the orbit. Although the KOMPSAT is planned to be directly inserted into the Sun- synchronous orbit of 685 km altitude, the orbit maneuvers are required fur the correction of the launch vehicle dispersion. Flight dynamics support such as orbit determination and maneuver planning will be performed by using KOMPSAT Mission Analysis and Planning Subsystem(MAPS) in KOMPSAT Mission Control Element(MCE). The KOMPSAT MAPS have been jointly developed by Electronics and Telecommunications Research Institute(ETRI) and Hyundai Space & Aircraft Company(HYSA). The KOMPSAT MCE was installed in Korea Aerospace Research Institute(KARI) site for the KOMPSAT operation. In this paper, the orbit determination and maneuver planning are introduced and simulated for the KOMPSAT spacecraft in LEOP operation. Initial orbit determination using short arc tracking data and definitive orbit determination using multiple passes tracking data are performed. Orbit maneuvers for the altitude correction and inclination correction are planned for achieving the final mission orbit of the KOMPSAT.

• Proceedings of the Safety Management and Science Conference
• /
• 1999.11a
• /
• pp.53-72
• /
• 1999

IPQC system was introduced for the flight safety at the age of scientific safety management in the 1980s. In spite of performing this system, aircraft accidents caused by human factors, which were above 70% among all flight accident factors, have not been reduced. Accordingly, throughout this paper I analyzed the aircraft accident factors by means of a literature study and a pilot survey. Then, based on the notion of TQC(Total Quality Control), I hierarchically classified Individual Quality into Capacity Management, Safety Management, and General Management and did the low-ranked management factors as well. AHP (Analytic Hierarchy Process), one of the scientific management methods, was used for estimating the relative importance of Individual Quality Control factors and the heavy aircraft accident causes over the last 20 years were analyzed according to the flight ranks. Based on the comparative analysis of results derived above, an IPQC model as flight ranks is established. In short, according to this newly suggested model we can obtain the maximum flight safety with the preventive actions against aircraft accidents caused by human factors and by improving the operation effect under the reasonable pilot management.

• Journal of Aerospace System Engineering
• /
• v.15 no.4
• /
• pp.11-20
• /
• 2021

The estimation of hovering flight time of multicopters using the battery power propulsion system is important for the development and design of the aircraft and its operation. For a given operational weight, the maximum possible battery weight can be decided using both a conventional energy density method and a new Peukert law. In the present study, the hovering flight time is predicted using both methods. The specific data of multicopters in the published literatures were employed for the computation of the hovering flight time. The results were validated with the measured data. The effect of figure of merit of propeller, battery discharging process on the hovering flight time was evaluated, Finally, the effect of the battery cell and package connection types on the hovering time was investigated. It was found that the combination of serial battery cell connections and parallel package connection is the bast in the endurance maximization aspect. As the cell number increases in a package, the hovering flight time is increased. There exists the max. battery ratio for the given takeoff gross weight.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.4
• /
• pp.406-412
• /
• 2009

Flight simulation model for helicopter simulator is one of the most important models which affect flight performance and handling quality. It is typical to develop the model based on the raw data and models from the helicopter designers/manufacturers. The approaches in this study were to develop the basic model based on the available resources regarding helicopter operation/maintenance and to tune and validate it based on the flight test results. The basic model was developed with maintenance manuals, flight manuals, analyses, measurements, papers and so on considering that KA-32T data could not be obtained from the manufacturer. The flight test for KA-32T was performed and the reference data for the simulation validation tests were acquired. The flight simulation model was validated to have the fidelity compatible with level C of FAA AC120-63 after comparison and tuning with flight test results.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.19 no.2
• /
• pp.45-51
• /
• 2011

The article specified in aviation legislation, 'The captain has the final authority and responsibility in flight safety' could be one reason running counter to applying "Vertrauensgrundsatz". In practice, however, captains do not have professional skills in every task and they should distribute duties and responsibilities to flight attendents and other staffs to operate the flight as safely and efficiently as possible. Therefore, in aviation, fair criterion, namely, "Vertrauensgrundsatz" is necessary to balance between efficiency and legal interest for participants. In addition, when it comes to mutual trust of duty which was the starting point of this study, the standard in mutual advice or interference must be based on the duty specified in air law and flight regulations. Also, pervasive trust will not only be attributed to joint responsibility but an act that cannot be trusted.

• Journal of the Ergonomics Society of Korea
• /
• v.16 no.1
• /
• pp.97-105
• /
• 1997

An aircraft simulator for ergonomics testing and pilot training was developed from the joint work Agency for Defense Development(ADD) and Daewoo Heavy Industry, LTD, in Korea at first time. It is basically to satisfy the requirements established by FAA-AC-120-40C ( 1995-JAN-26). The aircraft simulator will be used mainly for ergonomics testing and pilot training for basic trainer on ADD and Korea Air Force in near futrue. This simulator reproduces faithfully the cockpit and flight characteristics of the KTX-1 aircraft. It is one of the latest full flight simulators that have the CGI(computer graphic image) visual system and six degree of freedom motions system. Development efforts focused on user-oriented design approach for ergonomics testing and flight training of pilots. Main characteristics of each subsystem are described such as cockpit, instruments, control loading system, motion system, visual system, aural system, instructor operation station and aircraft simulation softwear.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.5
• /
• pp.353-358
• /
• 2013

In this paper, we present an implementation of indoor flight to navigate to the designated places capable of hands-off autonomous operation within indoor environments. Our flight requires computer vision technique and smartphone device to allow it to be flown indoors without high-performance sensors which are too expensive to commercialization. The experimental result show that proposed implementation is fairly meaningful in a general building.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.537-544
• /
• 2018

A national comprehensive aviation test center is being constructed for the purpose of flight tests for development and modification of aircraft or flight inspections for the development of navaids. Flight testing is a high-risk task, so strict risk management processes are required prior to operation. In addition, since the flight test center is subject to the airdrome regulations under the current law, the introduction of the safety management system will enhance safety as usual in ordinary airports. The establishment of a safety management system based on ICAO criteria is an optimal means of ensuring safe and effective operation of the test center and may mitigate the risks that may arise during flight testing. This paper focuses on risk assessment and mitigation required for safety management at the flight test center. We conducted risk assessments on the flight hazards identified in the previous study. Then the high risk group of hazards were selected and risk mitigation techniques such as avoidance, reduction, acceptance, and control were applied.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.27 no.2
• /
• pp.132-137
• /
• 2017

Drone is currently used for wide application areas in our real life. Also it performs more important functions. We propose a method of drone operation system for the prevention of industrial disaster. In normal operation of drone system the drone monitors the industrial sites according to the planned flight path with acquiring the monitored images and send the image information to the server. The server analyzes and compares the images to DB information by calculating the similarity based on the threshold. Then the system decides whether the industrial sites has problems or not. If the abnormal condition is occurred, the drone change the flight path to abnormal flight path and keep monitoring the industrial sites with measuring the air status by sensors and sends all information to server system on the ground. If the emergency case is occurred, drone approaches the closest position of accident points and acquiring the all information and send them to server and 119 center.