• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.307-310
• /
• 1996

In this paper, we deal with some numerical analyses of a re-entry vehicle in a 2-dimensional plane as an optimal control problem. To reduce the dynamic load, the heat load and the oscillation in the trajectory, we researched the trajectories in which the load factor or the rate of flight path angle was minimized during re-entry. In addition to that, taking advantage of the monotonous subarc method and the folded time-axis method, we tried to find the heat-less and load-less trajectory with combinations of some sectional functionals so that we can achieve more comfortability.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.3
• /
• pp.81-87
• /
• 2015

Load master is authorized to be controlled all of loading stuffs for safety of flight such as passenger, baggage, cargo and e.t.c. There are many things are missed even though the weight and balance is the most important process. This study analyzes how the differences of C.G. by among ten load masters of each careers. This study is tested how load-master takes load-control by the respective result based on differences of each practical experiences, gender and a number of certification. In result, all of load masters set C.G. on the stability region. But the practical experience of load master is relative to set better C.G. for economical effectiveness of weight and balance control work.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.6
• /
• pp.1043-1050
• /
• 2010

This paper examined the probabilistic load analysis for the tailplane during pitching maneuvering in the conceptual aircraft design phase. The flight load analysis based on the probabilistic distribution of design variables are compared with the results of the deterministic analysis. Two forms of variable distribution are used in this paper. One is standard normal distribution, the other distribution is calculated from the results of short-period longitudinal equation of aircraft motion. The influence of the distribution parameter on the probabilistic load analysis was investigated and the significant design variables that have an impact on the mean and variance of probabilistic load were identified. The comparison indicates that probabilistic load analysis provides more reliable probabilistic load distribution for the structural design than the traditional deterministic analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1684-1687
• /
• 1997

A dynamic load simulator which can reproduce on-ground the hinge moment of aircraft control surface is and essential rig for the loaded performance test of aircraft test of aircraft acutation system. The hinge moment varies wide in the aricraft flight enveloped depending on specific flight condition and maneuvering status. To replicate the wide spectrum of this hinge moment variation within some accuracy bounds, a force controller is designed based on the Quantiative Feedback Theory (AFT). Through the analysis on hinge moment dynamics, a design specification for the force controller is suggested. The efficacy of QFT force controller is verivied by simulation, in which combined aricraft dynamics/flight control law and hydraulic actuation system dynamics of aircraft control surface are considered.

• Journal of Advanced Navigation Technology
• /
• v.27 no.3
• /
• pp.255-261
• /
• 2023

A main purpose of this research was to analyze environmental factors to influence helicopter accidents contrary to the fact that the almost 80% of helicopter accidents happened due to pilots' human errors. There have been about 14 helicopter accidents in civil aviation sector last decade. It is noteworthy that nine of 14 accidents happened during the external sling load operation. Moreover, there is no law or regulation which could cover the helicopter external sling load operation or human external cargo in Korea. In this paper, it was analyzed the training and education regulations regarding helicopter external sling load operation or human external cargo in regulations of FAA and EASA, Based on analyzing and comparing the FAR part 133 and domestic aviation law (aviation safety act and flight safety regulations), it was found out the implication how to apply helicopter type rating for external sling load operation and human external cargo operation. To sum up, this paper expect central government should cooperate and amend aviation law which apply external sling load operation and external cargo to establish sound safety culture in Korea.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.1026-1030
• /
• 2011

This paper presented here contains development of variable stability system(VSS) control laws for the KIFS (Korean In-Flight Simulator) aircraft to simulate the dynamics of F-16 aircraft. Development of VSS Control law for pitch rate, roll rate, yaw rate simulation for three specified flight conditions using Model Following Technique with rate feedback autopilot for stability provision. The direct lift force controller was also added to the developed VSS control law to simulate the pitch rate and normal g-load simultaneously. The simulation results show high accuracy of F-16 aircraft's pitch, roll, yaw rate and g-load simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.367-371
• /
• 2004

This paper describes development of automatic flight control system for an unmanned target drone which is operated by Korean army as for anti-air gun shooting training. Current target drone is operated by pilot control of on-board servo motor via remote control system. Automatic flight control system for the target drone greatly reduces work load of ground pilot and can increase application area of the drone. Most UAVs being operated now days use high-priced sensors as AHRS and IMU to measure the attitude, but those are costly. This paper introduces the development of low-cost automatic flight control system with low-cost sensors. The integrated automatic flight control system has been developed by integrating combining power module, switching module, monitoring module and RC receiver as an one module. The performance of automatic flight control system is verified by flight test.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.2
• /
• pp.237-247
• /
• 1999

Flight parameters of a light aircraft in normal category named ChangGong-91 we identified from flight tests. Modified Maximum Likelihood Estimation (MMLE) is used to produce aerodynamic coefficients, stability and control derivatives. A Flight Training Device (FTD) has been developed based on the identified flight parameters. Flat earth, rigid body, and standard atmosphere are assumed in the FTD model. Euler angles are adapted for rotational state variables to reduce computational load. Variations in flight Mach number and Reynolds number are assumed to be negligible. Body, stability and inertial axes allow 6 second-order linear differential equations for translational and rotational motions. The equations of motion are integrated with respect to time, resulting in good agreements with flight tests.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.4
• /
• pp.61-68
• /
• 2010

Appling high technology of aerospace to automobile, so it is able to progress safety which is a goal of future automobile and to approach development of self-control automobile. This is realized dynamic model of airplane at DFCS(Digital Flight Control System). The DFCS calculates control values for self-control flight. If this high technology applies to automobile, then it is able to be maneuvered automobile like UAV's self-control flight. In this paper is reanalyzed automobile dynamic applied load control model used high-tech of airplane. It analyzes riding comfortable according to movement of automobile using the load control model, presents method of solution for improvement riding comfortable and presents example of self-control system used the load control model for self-control driving.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.8
• /
• pp.639-646
• /
• 2017

In this paper, a new load monitoring system for military aircraft is introduced. This system consists of sensors, an onboard device and an ground analysis equipment. The sensors and onboard device are mounted on the aircraft and the ground analysis equipment is operated on the ground. Through this system, structural static load can be estimated with flight parameters and structural responses can be measured by sensors due to static load, dynamic load and unexpected events. Especially, optical fiber sensors with mutiplexing capability are utilized. The onboard device was specially designed for complying the requirements of relevant military specifications and was verified through a series of the environment tests. This system was used and evaluated through ground structural tests before flight tests. In the near future, this system will be applied to military aircraft as a structural load monitoring system after flight test evaluation.