• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.6
• /
• pp.816-821
• /
• 2015

In this paper, an in-flight prediction method of thrust profiles for solid rocket motors is proposed. Actually, it is very difficult to have detailed information about the performance of the rocket motors beforehand because it is quite sensitive to combustion environments. To overcome this problem, we have developed an algorithm for generating in-flight prediction of rocket motor performance in realistic environments via a reference burnback profile and accelerations measured at a short time-interval just after launch. The performance is evaluated through a lot of flight test results.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.3
• /
• pp.157-162
• /
• 2012

In this paper, we propose a flight data storing system for effective data processing. Since the flight data contains critical information and their sizes are vast, encryption and compression would be needed to manage the flight data in effect. And we implemented the flight data storing system using an embedded board with DSP based on DPCM compression and AES encryption. Especially, we applied the reordering technique to advance the security function. From the simulations for two type data of voice and avionics, we found the developed system is well performed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.7
• /
• pp.891-897
• /
• 2020

A flight termination system, which consists of ground and vehicle systems, forcibly terminates flight if it is deemed dangerous. In order to accomplish this, the system should maintain the link reliability above a certain level throughout the whole flight. However, the national proving ground for guided missiles could not fully meet that condition because of the gradually improving performance criteria. In this paper, we have analyzed the link budget for the flight termination system. Furthermore, we have designed and developed an emergency destruction command transmitter system, which is a ground system of the flight termination system, to provide the necessary link margin. Afterwards, we measured the received signal strength at the vehicle system and compared it with that of the existing transmitter system. We hereby confirmed that the link reliability of the flight termination system improved.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.463-467
• /
• 2005

In this paper, the guidance law applicable to formation flight of UAV in three-dimensional space is proposed. The concept of miss distance, which is commonly used in the missile guidance laws, and Lyapunov stability theorem are effectively combined to obtain the guidance commands of the wingmen. The propose guidance law is easily integrated into the existing flight control system because the guidance commands are given in terms of velocity, flight path angle and heading angle to form the prescribed formation. In this guidance law, communication is required between the leader and the wingmen to achieve autonomous formation. The wingmen are only required the current position and velocity information of the leader vehicle. The performance of the proposed guidance law is evaluated using the complete nonlinear 6-DOF aircraft system. This system is integrated with nonlinear aerodynamic and engine characteristics, actuator servo limitations for control surfaces, various stability and control augmentation system, and autopilots. From the nonlinear simulation results, the new guidance law for formation flight shows that the vehicles involved in formation flight are perfectly formed the prescribed formation satisfying the several constraints such as final velocity, flight path angle, and heading angle.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.6
• /
• pp.149-157
• /
• 2011

In this paper, we propose a new DPCM-based transmission scheme for flight data. The amount of the flight data from LRU to MC has been increased due to the emergence and development of avionics systems and functions. It becomes a serious issue for satisfying the hard real-time processing required in the MC. In order to solve this problem, we observed the flight data produced by X-Plane simulator and discovered that the most flight data are moderately varied during flight. Based on this fact, a new data format is suggested by modifying that of ARINC-429 protocol in this paper. And the different value of the flight data is transmitted in the proposed scheme. The simulation results show that the proposed scheme achieves 20% data transfer gain compared to the ARINC-429 based transmission method.

• Journal of Korea Multimedia Society
• /
• v.13 no.9
• /
• pp.1373-1381
• /
• 2010

Current flight maneuver diagram used by pilots is based on 2D spatial presentation, so it has limitation on display 3D flight information and hard to understand it instinctively. Flight animation authoring tools for this diagram are complex to use and lack useful features like non-linear editing of flight path and real-time interactivity on multiple aircrafts. This research focuses on 3D flight path generation method in the animation system for flight maneuver education. This research combines initial sketch input on 2D diagram with the thrust of an aircraft to generate 3D linear spline as close as to real flight. Using suggested linear spline creation method, the flight path can be visualized, edited, and animated in real-time at the flight maneuver briefing and debriefing.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.5
• /
• pp.385-392
• /
• 2018

This paper suggests a new method to estimate the roll and pitch damping moment coefficients of a flying disc through sensor data from the onboard IMU module. This method can be easily performed than wind tunnel or computational fluid dynamics methods because it estimates aerodynamic coefficients simply after accumulating the inertial data through several repeated flight experiments. Estimated coefficients are applied to a simulator which is based on the flight dynamics of a flying disc. Finally, the predicted flight trajectory is compared with the true position provided by GPS, which demonstrated the validity of the proposed estimation method.

• Journal of Advanced Navigation Technology
• /
• v.2 no.2
• /
• pp.143-156
• /
• 1998

Incheon International Airport(IIA) is planned to open in about two years. Korean government has an ambition to make IIA a major hub airport in Northeast Asia. The most essential and required condition for an airport to be a successful hub airport in a certain region is to have more efficient flight service network than the other airports in the same region. IIA should compete with Japanese airports to be a major hub in Northeast Asia because Japanese government also has a plan to expand greatly the airport capacity in Tokyo area and Kansai airport in Osaka. It is necessary for both IIA and Korean national air carriers to compose efficient flight service network considering hub competition with Japanese major airports. As the liberalization of international air transport industry would give more marketing freedom to airlines, they would plan the flight service network and flight schedule based on market analysis instead of governmental regulations. In the economically liberalized environment, it is very required to analyze air passengers' flight choice behaviour in order to induce other carriers and passengers through IIA's attractive flight service network. Disaggregate model is more appropriate than aggregate model to analyze consumers' behaviour. The information derived from disaggregate choice model of air passengers could be utilized in devising efficient flight network and schedule plan. Value of travel time or trade off ratio between flight frequency and travel time which could be estimated from discrete choice model could be utilized for scheduling an efficient flight plan for airlines and composing efficient flight service network for IIA.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.4
• /
• pp.581-589
• /
• 2015

This paper describes a monocular vision-based formation flight technology using two fixed wing unmanned aerial vehicles. To measuring relative position and attitude of a leader aircraft, a monocular camera installed in the front of the follower aircraft captures an image of the leader, and position and attitude are measured from the image using the KLT feature point tracker and POSIT algorithm. To verify the feasibility of this vision processing algorithm, a field test was performed using two light sports aircraft, and our experimental results show that the proposed monocular vision-based measurement algorithm is feasible. Performance verification for the proposed formation flight technology was carried out using the X-Plane flight simulator. The formation flight simulation system consists of two PCs playing the role of leader and follower. When the leader flies by the command of user, the follower aircraft tracks the leader by designed guidance and a PI control law, and all the information about leader was measured using monocular vision. This simulation shows that guidance using relative attitude information tracks the leader aircraft better than not using attitude information. This simulation shows absolute average errors for the relative position as follows: X-axis: 2.88 m, Y-axis: 2.09 m, and Z-axis: 0.44 m.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.1
• /
• pp.77-88
• /
• 2022

With the development and popularization of drone manufacturing technology, the drone market, which was mainly focused on industry, agriculture, and military, is also showing great growth in individual and commercial markets. Among them, DJI has a high share in the personal and commercial drone market, and accordingly, forensic analysis of DJI drones is drawing attention. In particular, when stealing and analyzing drones used in criminal acts, a technology to interpret flight logs recording drone flight paths and hardware information is needed, which inevitably applies drone models due to differences in decryption methods. Therefore, when an unidentified drone is acquired from the perspective of a digital forensic investigator, a clear classification of a drone model to which analysis can be applied is required. This paper proposes a method of extracting and analyzing artifacts of DJI drones through forensics, and analyzes media data analysis and flight log analysis results and decryption methods for three drone models with different release years of DJI. Finally, drones in the DJI product line are classified according to whether the commercialized DJI drone flight log is decrypted.