• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1485-1486
• /
• 2011

A layer of $TiO_2$ thin film less than ~500nm in thickness, as a blocking layer, was coated by sol-gel method directly onto the anode electrode to be isolated from the electrolyte in dye-sensitized solar cells (DSCs). This is to prevent the electrons from back-transferring from the electrode to the electrolyte (I-/I3-). The effects of heat treatment conditions of the gel and as-coated film on the thickness and consolidation to substrate were studied. The flexible DSCs were fabricated with working electrode of Ti thin foil coated with blocking $TiO_2$ layer, dye-attached mesoporous $TiO_2$ film, gel electrolyte and counter electrode of Pt-deposited indium doped tin oxide/polyethylene naphthalate (ITO/PEN). The photo-current conversion efficiency of the cell was 5.3% ($V_{oc}=0.678V$, $J_{sc}=12.181mA/cm^2$, ff=0.634) under AM1.5, 100 mW/$cm^2$ illumination.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.11
• /
• pp.1122-1129
• /
• 2009

Recently taping robot with smart recognition function have been studied in the coil manufacturing field. Due to the difficulty of 3D surface processing from the complicated working environment, it is not easy to accomplish smart tape attachment motion with non-contact sensor. To solve these problems the applicable surface recognition algorithm and a flexible sensing device has been recommended. In this research, the fusion method between 1D displacement and 3D laser scanner is applied for robust tape attachment about cold rolled coil. With these sensors we develop a two-step exploration and the smart algorithm for the awareness of non-aligned coil's information. In the proposed robot system for tape attachment, the problem is reduced to coil's radius searching with laser displacement sensor at first, and then position and orientation detection with 3D laser scanner. To get the movement at the robot's base frame, the hand-eye compensation between robot's end effector and sensing device should be also carried out respectively. In this paper, we examine the auto-coordinate transformation method in the calibration step for the real environment usage. From the experimental results, it was shown that the taping motion of robot had a robust under the non-aligned cold rolled coil.

• Journal of Korean Elementary Science Education
• /
• v.36 no.2
• /
• pp.163-179
• /
• 2017

This study is to examine whether elementary science textbooks in Korea and Singapore are applicable to flipped learning. By comparative study we sought to identifying appropriate features of science textbooks for learner-centered teaching. We analyzed text pages on the unit of 'Working of electricity' in Korean elementary science textbook for sixth grade and three chapters of 'Electric circuits, Using electricity, Conductors of electricity' in Singaporean elementary textbook, 'Science : My pals are here!'. We designed evaluating frameworks for science textbooks based on the four pillars of flipped learning. and applied it to 10 elementary teachers evaluate two textbooks. They evaluated textbooks with Likert Scale items and wrote detailed statements and exemplars about their choices. We analyzed the teachers' evaluative descriptions inductively and chose commonly mentioned characteristics. Based on the analysis, we got to the conclusion about specific features of two elementary science textbooks in terms of flexible environment, learning culture, intentional contents, and teachers' expertises. Implications for improving science textbooks towards flipped learning and learner-centered teaching through comparative study were discussed.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.33
• /
• pp.247-275
• /
• 2007

This paper is to propose the Direction for the institutional improvement of Financial Supply Chain Management(FSCM) Solution which are currently coming into operation under Global e-Trading Platform. The Financial Supply Chain compromise the entire trade processes and information that manage a trader's cash, Accounts payable and receivable, Risk, working capital, and so on in international trade transaction. From a buyer's perspective, this involves the full procurement-to-payment process. For the seller, it is the order-to-cash cycle. Bolero provides the party concerned a e-trade platform which conformed to these fundamental pre-requisites to underpin fully electronic trade. But this FSCM solution have failed to provide the efficient platform to effectively manage the process of Global e-Trade because it does not correspond with e-Trade environment. Therefore, present FSCM system need the institutional improvement as follows: AA) Strengthening the role of the correspondent Bank under e-Trade System, BB) Extending the function of e-Trade intermediary institution, CC) The introduction of Trade Insurance System, etc. So, by streamlining and automating these processes on an open and flexible platform, The party concerned can optimize their trade transaction and maintain better relations with their business partners

• Journal of Engineering Education Research
• /
• v.16 no.6
• /
• pp.29-37
• /
• 2013

The necessity of convergence education is more emphasized based on the education policy for fostering creative men of talent. Inside universities, however, programs for training talented individuals are still at primary stage. Universities understanding the importance of convergence education and thus founding some major fields of convergence studies have experienced hosts of troubles. The paper discusses the necessary plans of supports from the government and the university to activate the convergence education in accord with the social demands. Twenty-eight professors in engineering colleges participated in the survey for reviewing the required factors for the convergence education. In addition, structured interviews were carried out with three specialists working in industry and academic area of convergence technology. The study could suggest the following activation plans based on the government supports: (1) establishing a support center of convergence education, (2) founding a major field of convergence, (3) developing curriculums and curriculum subjects, and (4) hosting related conferences and forums. Also, the study could suggest the following activation plans based on the university supports: (1) developing special programs on convergence education in accord with the industrial demands, (2) revising regulations and administrative systems more flexible for the convergence education, and (3) providing incentives to the participants in the convergence education.

• Journal of Biosystems Engineering
• /
• v.31 no.1 s.114
• /
• pp.52-58
• /
• 2006

Various robots were developed for harvesting fruits and vegetables. However, each robot was designed for a specific task such as harvesting apples or vegetables. This has been a big hurdle in application of robots to agriculture. A new type of hybrid manipulator with both parallel and serial joints was developed and designed to apply to various kinds of field operations. The hybrid manipulator had 2 extra degree of freedom in serial joints which made it flexible in switching one to the other type of hybrid manipulator, for example, PUMA to SCARA. And it was designed to harvest heavy fruits such as musky melons or water melons even behind leaves or branches of tree. This hybrid manipulator showed less than $\pm1mm$ position error. It was concluded that the hybrid manipulator was an effective and feasible tool to perform various works and to increase working performance.

• Bulletin of the Korea Photovoltaic Society
• /
• v.6 no.1
• /
• pp.8-20
• /
• 2020

Nepal has huge potential of hydro and other renewable energy resources including solar energy. However, only 70% of the total population have access to electricity despite the long history of hydropower development in the country. Still more than 37% population in rural areas and around 73% population in Karnali Province, one of the least developed provinces, are living without access to electricity despite taking several initiatives and implementing various policies by government supporting electrification in off-grid rural areas. Government together with donors and private sector has extensively been promoting the off-grid solar photovoltaic (PV) echnology in un-electrified areas to increase electricity access. So far, more than 900,000 households in rural areas of Nepal are getting electricity from stand-alone solar PV systems. However, there are many challenges including financial, technical, institutional, and governance barriers in Nepal. This study based on extensive review of literatures and author's own long working experiences in renewable energy sector in Nepal, shares the best practices and lessons of off-grid solar PV for increasing access to electricity in rural areas of Nepal. This study suggests that flexible financial instruments, financial innovations, bundling of PV systems for concentrating energy loads, adopting standards process, local capacity building, and combination of technology, financing and institutional aspects are a key for enhancing effectiveness of solar PV technology in rural areas of Nepal.

• Journal of Construction Engineering and Project Management
• /
• v.8 no.2
• /
• pp.1-16
• /
• 2018

The Architectural, Engineering and Construction (AEC) industry has a culture of long working hours that sometimes extend to weekends. As a result, construction employees find it challenging to achieve a balance between their work and personal lives. It is believed that there is rarely a clear separation between employees' work and personal life in the AEC industry. This paper suggests that in order to attract and retain a talented workforce, AEC organizations have to cater for the diverse needs of employees with regard to work-life balance. This paper presents the results of a survey of both professional and managerial employees' perspective on work-life conflict issues in private and public AEC organizations. Perspectives were found to differ, although not significantly, by employees' experience, leadership experience, age and gender. Furthermore, most survey respondents noted that their employers did not have a policy or program in place supporting work-life balance initiatives. Finally, although the AEC industry is making strides to improve work-life balance, the effort is lagging behind other industry sectors in providing policies and programs to promote work-life balance through flexible work hours and various other means.

• Journal of Computational Design and Engineering
• /
• v.3 no.1
• /
• pp.53-62
• /
• 2016

The current trends of product customization and repair of high value parts with individual defects demand automation and a high degree of flexibility of the involved manufacturing process chains. To determine the corresponding requirements this paper gives an overview of manufacturing process chains by distinguishing between horizontal and vertical process chains. The established way of modeling and programming processes with CAx systems and existing approaches is shown. Furthermore, the different types of possible adaptions of a manufacturing process chain are shown and considered as a cascaded control loop. Following this it is discussed which key requirements of repair process chains are unresolved by existing approaches. To overcome the deficits this paper introduces repair features which comprise the idea of geometric features and defines analytical auxiliary geometries based on the measurement input data. This meets challenges normally caused by working directly on reconstructed geometries in the form of triangulated surfaces which are prone to artifacts. Embedded into function blocks, this allows the use of traditional approaches for manufacturing process chains to be applied to adaptive repair process chains.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.5
• /
• pp.365-376
• /
• 2014

Objective:The objective of this study is to apply the principals and policies of universal design to offer a safe and efficient workplace for older workers. Background: The concept of universal design has rapidly developed under the paradigm that tasks should be easy and comfortable for all people with diverse features. The concept is also fitting when designing a workplace. Method: Legislations, policies and precedents of workplaces with older workers have been studied and analyzed. The compilation has been used to project the present and future of employing universal design at workplace devisal. Results: Every country has its own legislations/policies regarding universal design, flexible working, and age-friendly workplaces to increase hire of older workers. The basic concept of UD and its application is explained. This study provides guidelines for employing universal design at workplaces and preventing accidents for older workers. Conclusion: Following the principals of universal design is expected to furnish a comfortable and safe workplace and lengthen the period of workers participating in the labor force in an ageing society. Application: This study offers the principles for universal design, serving as fundamental research for its application to the workplace.