• Ocean and Polar Research
• /
• v.44 no.2
• /
• pp.147-160
• /
• 2022

SRFC (Sub-Regional Fisheries Commission) requested to the ITLOS (International Tribunal for the Law of the Sea) an advisory opinion relating to the IUU (Illegl, Unreported, and Unregulated) fishing (Case No-21 of the ITLOS). Since, in the UNCLOS, there is no article authorizing the jurisdiction of the ITLOS full court's Advisory opinion, so various scholarly opinion wad divided. But ITLOS delivered its Advisory opinion confirming its jurisdictional competence over the Advisory proceedings with its legal opinion about the IUU issues. It opens new possibility of the alternative dispute settlement mechanism of the ITLOS through the advisory procedures. In reality, there has been a view that ICJ (International Court of Justice) could take the part of a kind of dispute settlement through its Advisory procedures. But the advisory procedures of the ITLOS, with no definite clause in UNCLOS about the advisory procedures, which provides more allowances for the function of advisory opinion as the alternative dispute settlement mechanism. ITLOS accepted the requests of the advisory opinion by the State parties through international organization or themselves directly. And the advisory opinion of the ITLOS aims the interpretation and application into the special issues-specially IUU fishing in Case No. 21 of the ITLOS-. Those factors could enable more enhanced role of the ITLOS as an alternative dispute settlement mechanism. But those possibility has contain risk of excessive and unlimited advisory role of the ITLOS. So it is important to focus on the restriction on the role of the State parties in the request of the advisory opinion to the ITLOS. In this regard it is meaningful that the ITLOS has suggested a kind of legal standing in the advisory procedures in that only coastal States could request the Advisory opinion about the IUU in their EEZ. Furthermore the discretionary power of the ITLOS in the Article 138 of the Rules of the Tribunal could curtail the abuse of the Advisory opinion initiated by the States parties of the UNCLOS. Under this framework, Advisory opinion could broaden more alternative option to the disputes between State parties of the UNCLOS in that after being delivered detailed interpretation of the UNCLOS about the specific issues, States parties could devote themselves to searching for flexible solution for the disputes between State parties. It could obtain legal explanation about the dispute under the Article 297 and Article 298 by detouring the jurisdiction limits through advisory procedures.

• Composites Research
• /
• v.34 no.6
• /
• pp.357-372
• /
• 2021

The energy harvesting device is known to be promising as an alternative to solve the resource shortage caused by the depletion of petroleum resources. In order to overcome the limitations (environmental pollution and low mechanical properties) of piezoelectric elements capable of converting mechanical motion into electrical energy, many studies have been conducted on a polymer matrix-based composite piezoelectric energy harvesting device. In this paper, the output performance and related applications of the reported piezoelectric composites are reviewed based on the applied materials and processes. As for the piezoelectric fillers, zinc oxide, which is advantageous in terms of eco-friendliness, biocompatibility, and flexibility, as well as ceramic fillers based on lead zirconate titanate and barium titanate, were reviewed. The polymer matrix was classified into piezoelectric polymers composed of polyvinylidene fluoride and copolymers, and flexible polymers based on epoxy and polydimethylsiloxane, to discuss piezoelectric synergy of composite materials and improvement of piezoelectric output by high external force application, respectively. In addition, the effect of improving the conductivity or the mechanical properties of composite material by the application of a metal or carbon-based secondary filler on the output performance of the piezoelectric harvesting device was explained in terms of the structure of the composite material. Composite material-based piezoelectric harvesting devices, which can be applied to small electronic devices, smart sensors, and medicine with improved performance, can provide potential insights as a power source for wireless electronic devices expected to be encountered in future daily life.

• International Journal of Computer Science & Network Security
• /
• v.22 no.11
• /
• pp.141-148
• /
• 2022

The development of the education system and the labor market today requires new conditions for unification and functioning, the introduction of an innovative culture in the field of Education. The construction of modern management of innovative development of a higher education institution requires consideration of the existing theoretical, methodological and practical planes on which its formation is based. The purpose of the article is to substantiate the modern paradigm of organizing the mechanism of managing the innovative development of higher education institutions. Innovation in education is represented not only by the final product of applying novelty in educational and managerial processes in order to qualitatively improve the subject and objects of management and obtain economic, social, scientific, technical, environmental and other effects, but also by the procedure for their constant updating. The classification of innovations in education is presented. Despite the positive developments in the development of Education, numerous problems remain in this area, which is discussed in the article. The concept of innovative development of higher education institutions is described, which defines the prerequisites, goals, principles, tasks and mechanisms of university development for a long-term period and should be based on the following principles: scientific, flexible, efficient and comprehensive. The role of the motivational component of the mechanism of innovative development of higher education institutions is clarified, which allows at the strategic level to create an innovative culture and motivation of innovative activity of each individual, to make a choice of rational directions for solving problems, at the tactical level - to form motives for innovative activity in the most effective directions, at the operational level - to monitor the formation of a system of motives and incentives, to adjust the directions of motivation. The necessity of the functional component of the mechanism, which consists in determining a set of steps and management decisions aimed at achieving certain goals of innovative development of higher education institutions, is proved. The monitoring component of the mechanism is aimed at developing a special system for collecting, processing, storing and distributing information about the stages of development of higher education institutions, prediction based on the objective data on the dynamics and main trends of its development, and elaboration of recommendations.

• Journal of Family Resource Management and Policy Review
• /
• v.27 no.1
• /
• pp.1-12
• /
• 2023

This study forecasts the outlook 10 years from now regarding domestic labor and caregiving by the Baby Boomer generation and the preparations needed in the context of the Fourth Industrial Revolution. The scenario-planning method was used to explore changing trends in domestic labor and caregiving, the rationale for which has been questioned by both seniors and family welfare experts. Based on the results of the survey and our researchers' opinions, it was concluded that the changing trends were caused by two factors: the probability of alterations in domestic labor and the strength of family relationships. On the basis of these conclusions, four scenarios regarding baby boomers' domestic labor and caregiving in 10 years were proposed using two axes: the "high and low probability of alterations" and the "strengthening and weakening of family relationships." The first scenario is a "preference for the self-caring form of family," which has a high probability of domestic labor alterations and weak family relationships. The second scenario is a "preference for the flexible form of family," which has a high probability of domestic labor alterations and strong family relationships. The third scenario is a "preference for the traditional form of family," which has a low probability of domestic labor alterations and strong family relationships. The fourth scenario is a "preference for the public caregiving form of family," which has a low probability of domestic labor alterations and weak family relationships. These results provide basic information about the various aspects of baby boomers' lives-including the development of various goods and services, the establishment of policies regarding seniors, and programs for successful aging-and can help equip our society to take the actions needed for a super-aged population.

• Journal of Navigation and Port Research
• /
• v.47 no.4
• /
• pp.231-238
• /
• 2023

The position of a light buoy is always flexible due to the influence of external forces such as tides and wind. The position can be checked through AIS (Automatic Identification System) or RTU (Remote Terminal Unit) for AtoN. As a result of analyzing the position data for the last five years (2017-2021) of a light buoy, the average position error was 15.4%. It is necessary to detect position error data and obtain refined position data to prevent navigation safety accidents and management. This study aimed to detect position error data and obtain refined position data by DBSCAN Clustering position data obtained through AIS or RTU for AtoN. For this purpose, 21 position data of Gunsan Port No. 1 light buoy where RTU was installed among western waters with the most position errors were DBSCAN clustered using Python library. The minPts required for DBSCAN Clustering applied the value commonly used for two-dimensional data. Epsilon was calculated and its value was applied using the k-NN (nearest neighbor) algorithm. As a result of DBSCAN Clustering, position error data that did not satisfy minPts and epsilon were detected and refined position data were acquired. This study can be used as asic data for obtaining reliable position data of a light buoy installed with AIS or RTU for AtoN. It is expected to be of great help in preventing navigation safety accidents.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.10
• /
• pp.77-91
• /
• 2006

Domestic practices in shotcrete use have developed in many respects even now, but it still has issues about material, construction, quality standard and so on. In overseas, the construction using high strength shotcrete with $39.2{\sim}58.8 MPa$ of compressive strength is becoming common based on the shotcrete technology of high strength and durability. However, domestic shotcrete design strength is low at around 20.6 MPa of compressive strength and a long term durability is also insufficient. In this paper, field tests using high-quality additives and accelerators were performed to obtain the improvement of shotcrete strength and EFNARC standard was used to evaluate the field test results. In addition, deterioration test combined with the freezing-thawing and carbonation was also performed in order to investigate a long-term durability of high-strength shotcrete. As a result of the field test, the promotion ratio of early strength was $90{\sim}97%$ in case of using alkali-free accelerators. And the compressive strength of the shotcrete using Micro-silica fume was $45.2{\sim}55.8MPa$ and flexible strength was $5.01{\sim}6.66MPa$, so the promotion ratio of strength was $37{\sim}79%$ and $17{\sim}61%$ respectively. The promotion effect of strength by silica fine additives ratio of $7.5{\sim}10%$ for cement mass was much superior to the other cases. It was especially examined that using Micro-silica fume reduced deterioration due to mixed steel fiber and improved a long-term durability of shotcrete.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.5
• /
• pp.77-88
• /
• 2007

Lateral earth pressure and horizontal displacement of the diaphragm walls constructed in multi-soil layers were analyzed by the field instrumentation from six building construction sites in urban area. The distribution of the developed earth pressure of the anchored diaphragm walls during excavation shows approximately a trapezoid diagram. The maximum earth pressure of anchored diaphragm walls corresponds to $0.45{\gamma}H$ and the earth pressure acts at the upper part of the walls. The maximum earth pressure is two times larger than the empirical earth pressure of flexible walls in sands suggested by Terzaghi and Peck(1967), Tschebotarioff(1973), and Hong and Yun(1995a). The horizontal displacement of diaphragm walls is closely related with supporting systems such as struts, anchors, and so on. The horizontal displacement of anchored walls shows less than 0.1 percent of the excavated depth, and the horizontal displacement of strutted walls shows less than 0.25 percent of the excavated depth. Therefore, the restraining effect of horizontal displacement to the anchored diaphragm walls is larger than the strutted diaphragm walls. In addition, since the horizontal displacement of the diaphragm walls is lower than the criterion, $\delta=0.25%H$, used for control the anchored retention wall using soilder piles, the safety of excavation sites applied with the diaphragm walls is pretty excellent.

• Communications of Mathematical Education
• /
• v.36 no.1
• /
• pp.1-21
• /
• 2022

The purpose of this study is to analyze the current situation of EduTech, which is proposed as a way to build a flexible learning environment regardless of time and place according to the use of digital technology in mathematics subjects. The process of designing classes to use the EduTech platform, which is still in the development introduction stage, in public education is still difficult, and research to observe its effects and characteristics is also in its early stages. However, in the stage of preparing for future education, it is a meaningful process to grasp the current situation and point out the direction in preparation for the future in which EduTech will be actively applied to education. Accordingly, the current situation and utilization trends of EduTech at home and abroad were confirmed, and the functions and roles of EduTech platforms used in mathematics were analyzed. As a result of the analysis, the EduTech platform was pursuing learners' self-directed learning by constructing its functions so that they could be useful for individual learning of learners in hierarchical mathematics education. In addition, we have confirmed that the platform is evolving to be useful for teachers' work reduction, suitable activities, and evaluations learning management. Therefore, it is necessary to implement instructional design and individual customized learning support measures for students that can efficiently utilize these platforms in the future.

• Elastomers and Composites
• /
• v.37 no.4
• /
• pp.244-257
• /
• 2002

A thermotropic liquid crystalline polymer(TLCP) which has flexible butylene/hexylene spacers in the main chain and a triad aromatic ester type mesogenic unit containing a naphthyl group was prepared by solution polycondensation. The in-situ composites based on poly(ethylene 2,6-naphthalate) (PEN) and a thermotropic liquid crystalline polymer(TLCP) were prepared and melt spun at different TLCP contents and different draw ratios to produce monofilaments. Blends of the TLCP with PEN were investigated in terms of thermal, mechanical properties and morphology. The TLCP synthesized showed nematic mesophasic behavior and its transition temperature to isotropic melt from mesophase was 249℃. The blends showed well dispersed TLCP phases in the PEN matrix without macroscopic phase separation. Inclusion of TLCP in the blends decreased the cold crystallization temperature of PEN in the blend, therefore, the TLCP acts as a nucleating agent in the blend and showed good interfacial adhesion between the dispersed LCP phases and PEN matrix with domain sizes 40~50 nm in diameter and well developed fibrillation in the monofilaments. The TLCP acted effectively as a reinforcing material in the PEN matrix at the 10wt% level, it led to an increase of initial modulus up to 270% and tensile strength by 235%, while the elongation rate increasing with higher draw ratios.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.3 no.2
• /
• pp.65-88
• /
• 2008

To achieve the age of 30,000 dollars GNP, The business with speed will hold a more crucial point than the business with scale, and the mass consumption market will be transformed and changed into the niche market. Moreover, it will not be easy for the company without the peculiar and creative technology to survive in the severe competition. Under these circumstances, The innovative company which knows how to use this new paradigm will select the better position in the changing market. Innovation type SMEs are contributing in maintaining the international competitiveness of domestic economy by serving high-tech and the promotion of employment. Also, Innovation type SMEs have the most important economic leverage in our domestic economy. It's a source of the growth in domestic economy. Therefore, A lot of countries have been trying to support innovation type SMEs (with a small capital and high-tech). And many countries also try to protect and promote the innovation type SMEs. Especially the Korean government is also promoting innovation type SMEs in many ways, because the future of innovation type SMEs are not bright. This study explored the three innovative SEMs and studied 1) entrepreneur characteristics, 2) the industry environment, 3) competitive strategies, and 4) resources and capabilities of organization, which have been considered as the success factors for entrepreneurial firms. This study also holds that the characteristics of entrepreneurs is one of the most important factor to impact the success of innovative SMEs. Most of entrepreneurs have started their business with high education career and field experiences and have high intentions in developing new/high techonologies, challenging spirits, and clear vision and goals. The innovative SMEs with small kinds of products and services, narrow market, and small resources are more sensitively impacted by the environment especially. But the SMEs which entered into market early could have the comparative excellencies in their market to survive and grow in the future. They also have competitive advantages in the market using differentiation strategies by technology innovation. Technology innovation and differention strategies are one of the success factors in SMEs, They entered into the niche market using this weapons. The capabilities of changing organization to their changing environment, the open orgarnization culture, the continuous employment education, and the building the organic organization are also success factors of innovative SMEs. The SMEs with the simple organization structure can make fast decisions and operate with the autonomous and flexible ways. These only three cases will not shown successful factors of over 12,000 Innovation type SMEs in Korea and this study of Innovation type SMEs is insufficient from all aspects. But this study have many implications for the future research and the entrepreneurs ready for their business.