• 한국표면공학회지
• /
• 제48권1호
• /
• pp.23-26
• /
• 2015

What causes the transformation of a solar cell is the behavior difference of thermal expansion occurred between the substrate and the layer of semiconductor used in the solar cell. Therefore, the substrate has to possess a behavior of thermal expansion that is similar with that of semiconductor layer. This study employed electroforming to manufacture Fe-Ni alloy materials of different compositions. To verify the result from a finite element analysis, a two-dimensional Mo substrate was calculated and its verification experiment was conducted. The absolute values from the finite element analysis of Mo/substrate structure and its verification experiment showed a difference. However, the size of residual stress of individual substrate compositions had a similar tendency. Two-dimensional CIGS/Mo/$SiO_2$/substrate was modeled. Looking into the residual stress of CIGS layer occurred while the temperature declined from $550^{\circ}C$ to room temperature, the smallest residual stress was found with the use of Fe-52 wt%Ni substrate material.

• 한국지진공학회논문집
• /
• 제2권1호
• /
• pp.23-34
• /
• 1998

연약한 지반위에 기초한 유연한 구형 액체 저장탱크의 Rocking 운동에 대한 3차원 지진응답을 규명하기 위해서 동적 유체-구조 물-지반 계의 상호작용 해석방법을 개발하였다. 수평방향 병진 운동과 Rocking 운동을 받는 3차원의 구형 탱크의 운동 지배방정식을 Rayleigh-Ritz 방법을 적용하여 유도하였고 기반암위 토층의 표면에 놓인 강체 기초의 동적 강성행렬과 유체-구조물 계의 지배방정식을 결합하여 계산하였다.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.416-424
• /
• 2018

Oil spill and oily wastewater have now become a serious threat to the freshwater and marine environments. Porous materials with super-hydrophobicity and super-oleophilicity are good candidates for the oil adsorption and oil/water separation. Here, flexible hybrid nanofibrous membrane (FHNM) containing $SiO_2$/polyvinylidene fluoride (PVDF) microspheres was prepared by simultaneous electrospinning and electrospraying. The obtained FHNM combined the flexibility of the nanofiber mat and super-hydrophobicity of the microspheres, which could not be achieved by either only electrospinning or only electrospraying. It was found that when the weight ratio between the $SiO_2$ and PVDF reached a critical value, the $SiO_2$ nanoparticles were present on the PVDF microsphere surface, significantly improving the surface roughness and hence the contact angle of the FHNM. Compared with the pure electrospun PVDF nanofiber mat, most of the FHNMs have a higher oil adsorption capacity. The FHNM could separate the oil with water quickly under the gravity and displayed a high efficiency and good reusability for the oil/water separation. More importantly, the FHNM could not only separate the oil with the pure water but also the corrosive solution including the salt, acid and alkali solution.

• Corrosion Science and Technology
• /
• 제20권3호
• /
• pp.152-157
• /
• 2021

Stainless steel is a metal that does not generate rust. Due to its excellent workability, economic feasibility, and corrosion resistance, it is used in various industrial fields such as ships, piping, nuclear power, and machinery. However, stainless steel is vulnerable to corrosion in harsh environments. To solve this problem, its corrosion resistance could be improved by electrochemically forming an anodized film on its surface. In this study, 316L stainless steel was anodized at room temperature with ethylene glycol-based 0.1 M NH₄F and 0.1M H₂O electrolyte to adjust the thickness of the oxide film using different anodic oxidation voltages (30 V, 50 V, and 70 V) with time control. The anodic oxidation experiment was performed by increasing the time from 1 hour to 7 hours at 2-hour intervals. Corrosion resistance according to the thickness of the anodic oxide film was observed. Electrochemical corrosion behavior of oxide films was investigated through polarization experiments.

• 마이크로전자및패키징학회지
• /
• 제21권4호
• /
• pp.57-62
• /
• 2014

미래형 유연소자 개발 시 비용감소 및 공정적합성 개선을 위해 동박을 잉크젯 프린팅법을 이용해 공중합체 유연기판 상 형성하고, 전기적 특성에 열처리 분위기가 미치는 영향을 확인하기 위해 3 종류의 환원분위기에서 열처리를 진행하여 보았다. 그 결과 200도의 낮은 온도에서 환원 특성이 뛰어난 포름산 분위기에서 전도체 수준의 비저항은 얻을 수 있었으나, 열처리 시 발생하는 응력으로 인해 발생된 표면균열에 기인해 그 값이 기존 동박에 비해 매우 높았다. 이에 비정질재료에서 응용되는 응력해소법을 응용하여 표면균열을 억제한 결과 230도 열처리 시 기존 열처리 방법에서는 $7.4{\mu}{\Omega}cm$의 비저항을 보이나, 응력해소를 통한 표면 균열이 억제된 시편에서는 $3.4{\mu}{\Omega}cm$의 비저항 값을 얻을 수 있었다. 특히 등온열처리에 의한 응력해소 효과를 확인하기 위해 동일 온도에서 등온시간 없이 열처리를 진행한 결과, 표면균열이 억제되지 못함을 확인할 수 있었다.

• 폴리머
• /
• 제37권5호
• /
• pp.656-662
• /
• 2013

태양전지의 효율 증가를 위하여 유리비드가 함유된 polymethyl methacrylate(PMMA) 용액을 PMMA 필름 위에 코팅하여 유리비드가 코팅된 고분자 유연 패턴 필름을 제조하고 패턴 필름이 태양전지 효율에 미치는 영향을 살펴보았다. 필름 위에 코팅된 유리비드로 인하여 빛의 입사각 0도에서 90도 범위에서 태양전지의 상대효율이 최대 3.4%까지 증가함을 알 수 있었다. 이러한 효율 증가는 빛의 입사각 변화에도 필름 표면에 형성되어 있는 구 형태의 유리비드로 인하여 빛이 수직으로 입사되어 방향성에 의한 태양전지 효율 감소가 최소화되기 때문이다. 태양전지상대효율 증가는 필름 표면 위의 유리비드가 반구의 형태를 가질 때 가장 높으며 유리비드 함량에 따라 증가되나 유리비드 함량이 너무 많은 경우, 오히려 광 투과도 감소 및 빛의 간섭 효과에 의하여 상대효율이 감소됨을 알 수 있었다.

• 폴리머
• /
• 제35권4호
• /
• pp.302-307
• /
• 2011

실란 커플링제의 가수분해를 통한 실란올의 형성과 올리고머 구조형성을 하는 중합반응은 2-FCCL의 표면처리 과정에서 계면 사이의 접착력에 영향을 준다. 본 연구에서는 설란 커플링제의 가수분해반응 속도를 비교하고 표면처리 후 동박의 표면 에너지로 인한 접착특정의 변화를 확인하였다. 특히 이성분계 살란 커플링제는 가수분해 반응속도 조절이 기능하며, 동박과 폴리이미드 사이에서 접착 프로모터로서 확실한 접착력 향상을 보였다. 압연동박 표면에 처리한 이성분계 실란 커플링제의 함량 변화에 띠라 접착력의 향상 정도가 다르게 나타났으며 반응속도 조절과 표면 에너지 평가를 통한 접착 특성을 분석해 접착력을 최대화시켰다.

• Structural Engineering and Mechanics
• /
• 제20권2호
• /
• pp.191-207
• /
• 2005

Time delay exists inevitably in active control, which may not only degrade the system performance but also render instability to the dynamic system. In this paper, a novel active controller is developed to solve the time delay problem in flexible structures. By using the independent modal space control method, the differential equation of the controlled mode with time delay is obtained from the time-delay system dynamics. Then it is discretized and changed into a first-order difference equation without any explicit time delay by augmenting the state variables. The modal controller is derived based on the augmented system using the discrete variable structure control method. The switching surface is determined by minimizing a discrete quadratic performance index. The modal coordinate is extracted from sensor measurements and the actuator control force is converted from the modal one. Since the time delay is explicitly included throughout the entire controller design without any approximation, the system performance and stability are guaranteed. Numerical simulations show that the proposed controller is feasible and effective in active vibration control of dynamic systems with time delay. If the time delay is not explicitly included in the controller design, instability may occur.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.323-328
• /
• 2003

A basic design on a flexible riser in a floating type development system for upwelling deep ocean water is presented. In the numerical study, an implicit finite difference algorithm is employed for three-dimensional riser equations. Fluid and geometric non-linearity and bending stiffness are considered and solved by Newton-Raphson iteration. To keep the depth of end point of a flexible and light riser is very important for upwelling deep ocean water in a floating type development system. Weight attached at the end point of the riser in order to keep its intake depth is designed under the strong surface current and the configuration of the riser is predicted. The results of this study can be contributed to the design of the development system in floating type for upwelling deep ocean water.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.1-4
• /
• 2008

Fuel cells have the potential of providing several times higher energy storage densities than those possible using current state-of-the-art lithium-ion batteries, but current energy density of fuel cell system is not better than that of lithium-ion batteries. To achieve the high energy density, volume and weight of fuel cell system need to be reduced by miniaturizing system components such as stack, fuel tank, and balance-of-plant. In this paper, the thin flexible PCB (Printed circuit board) is used as a current collector to reduce the stack volume. Two end plates are made from light weight aluminum alloy plate. The plate surface is wholly oxidized through the anodizing treatment for electrical insulation. The opening rate of cathode plate hole is optimized through unit cell performance measurement of various opening rates. The performances are measured at room temperature and ambient pressure condition without any repulsive air supply. The active area of MEA is 10.08 $cm^2$ and active area per a unit cell is 1.68 $cm^2$. The peak power density is about 210 mW/$cm^2$ and the air-breathing planar stack of 2 Wis achieved as a small volume of 18 cc.