• 한국정밀공학회지
• /
• 제14권1호
• /
• pp.205-213
• /
• 1997

In this study, dynamic analysis of a passenger car is carried out to analyze ride quality over a random road profile. The front suspension of the car is a MacPherson strut type and the rear suspension is a multi- link type. The following five different models are constructed and compared to see the effects of engine vibration and chassis flexibility in the ride quality. (1) one rigid chassis model, (2) a rigid chassis and rigid engine model, (3) a rigid engine and flexible chassis model with one vibration mode, (4) one flexible chassis model with six engine vibration modes and one chassis vibration mode, (5) one flexible chassis model with seven vibration modes and four static correction modes. The result shows that engine vibration modes and the first bending mode of the chassis are important in the ride quality.

• 한국항공우주학회지
• /
• 제41권6호
• /
• pp.448-457
• /
• 2013

본 논문에서는 항공기 유연날개의 플러터 억제를 위한 능동 제어시스템을 슬라이딩 모드 제어기법을 이용해 설계하였다. 제어력으로는 유연날개 뒷전 조종면 움직임으로 발생하는 공기력을 이용하였으며, 이를 위해 공탄성 모델, 조종면 작동기 모델, 돌풍 모델로 구성되는 서보 공탄성 모델링을 수행하였다. 플러터 억제를 위한 조종면 제어시스템은 슬라이딩 모드 제어기와 측정값을 이용해 상태 변수를 추정하는 칼만 필터를 조합해 구성하였으며, 수치 시뮬레이션을 통해 유연날개 모델에 대한 플러터 억제 효과를 확인하였다.

• 소음진동
• /
• 제8권2호
• /
• pp.313-323
• /
• 1998

본 논문에서는 전기장 강도에 따라 댐핑력 조율이 가능한 ER댐퍼를 이용하여 유연구조물의 진동제어를 수행하였다. 아라빅 검 ER유체를 자체 조성한 후 전단 모드하에서의 빙햄모델을 실험적으로 도출하고, 이를 근거로 알맞은 크기의 ER댐퍼를 설계제작하였다. ER댐퍼를 장착한 양단고정형 유연구조물시스템을 구성하고, 제어기 설계를 위한 운동지배 방정식과 경계조건을 도출하였다. 시스템변수중 실제시스템에서 쉽게 발생할 수 있는 고유진동수와 감쇠비를 불확실 변수로 고려하여 슬라이딩모드 제어기를 설계하였다. 정현파와 랜덤가진에 대한 제안된 제어시스템의 우수한 진동제어 효과를 컴퓨터 시뮬레이션과 실험을 통하여 입증하였다.

• Tribology and Lubricants
• /
• 제27권2호
• /
• pp.57-64
• /
• 2011

Hybrid air-foil magnetic bearing integrates two oil free bearing technologies synergetically to adopt the strengths of two bearings with minimizing their weaknesses. This paper presents bending mode vibration control of a flexible shaft supported by the hybrid air-foil magnetic bearing. An experiment set-up of a flexible shaft supported by the hybrid air-foil magnetic bearing is built. In order to verify the effectiveness of the hybrid bearing, unbalance responses of the flexible shaft supported by three different bearings: air-foil, magnetic and hybrid bearings are compared. Effect of load sharing between air-foil and magnetic bearings are investigated through changing the control gain and the rotor center position of magnetic bearing. The experimental results shows that the hybrid bearing can control the bending mode vibration of the flexible shaft effectively and an optimal performance can be achieved with an appropriate load sharing between the air-foil and the magnetic bearings.

• 소음진동
• /
• 제6권3호
• /
• pp.287-296
• /
• 1996

A virtual work form of flexible multibody dynamic formulation with rotary inertia has been derived. For the analysis of large flexible multibody systems, deformation modal coordinates have been employed to represent coupled motion between gross and vibrational motion. For the efficient evaluation of the entries in the mass matrix, a flexible body has been treated as a collection of mass points. The rotary inertia was generated from the consistent mass matrix in a finite element model. Deformation mode shapes were obtained from finite element analysis. Bending and twisting vibration analyses of a cantilever have been carried out to see rotary inertia effects. A space flexible robot simulation has been also carried out to show effectiveness of the proposed formulation. This formulation is effective to the model that consists of beam, plate, or shell element that contains rotational degree of freedom at the nodal point. It is also effective to the flexible body model to which a large lumped rotary inertia is attached.

• 한국소음진동공학회논문집
• /
• 제15권2호
• /
• pp.169-175
• /
• 2005

In this paper, a novel vibration control scheme for a single-link flexible manipulator system without using a vibration feedback sensor is proposed. In order to achieve the vibration information of the flexible link, a reaction moment estimator based on the dynamic characteristics of the flexible manipulator is proposed. While the manipulator is maneuvering the reaction moment is reciprocally acting on the flexible link and the hub inertia due to the vibration of the link. A sliding mode controller based on the equivalent rigid body dynamics corresponding to the proposed flexible manipulator is then augmented with the reaction moment estimator to realize a decentralized control system. The reaction moment estimator is implemented via the first order low pass filter. The performance of the proposed control scheme is verified by computer simulation and experiment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.404-408
• /
• 2005

Having flexibility in a manipulator will degrade trajectory tracking control and manipulator tip positioning. In practice, however, constraints imposed by various operating requirements, will render the presence of such flexibility unavoidable. The dynamic analysis of the flexible manipulator is essential in designing proper control systems. A flexible manipulator consists of infinite number of elastic modes and the modes are usually coupled to each other. For the practicality, however, it is usually assumed that the flexible system consists of finite number of elastic modes and the modes are decoupled. These assumptions result in a linear and decoupled mathematical model of the flexible manipulator and simplify the analysis of the dynamic behavior and the design of the control system. The decoupling and linearization of the flexible link, however, has been assumed without in depth analysis. This paper focuses on the analysis of the significance of the non-linear coupling factors.

• 한국전자파학회논문지
• /
• 제22권6호
• /
• pp.605-612
• /
• 2011

본 논문에서는 차량 앞유리에 탈부착이 가능한 다이폴 형태의 T-DMB 수신용 안테나를 설계하였다. 안테나의 구조는 동박과 급전선의 매우 간단한 구조를 가지며, 운전자의 시야에서 완벽히 벗어날 수 있도록 차량 유리의 테두리 쪽에 존재한다. 차체의 특성과 안테나의 입력 임피던스 특성을 고려하여 제안된 미앤더 형태의 다이폴 안테나는 T-DMB 주파수 대역(174~216 MHz)을 만족한다. Common Mode Stub를 추가한 Flexible 안테나는 차량 앞유리에서 부착되는 위치에 상관없이 안테나의 입력 반사 손실은 -5 dB 이하를 가지는 것이 가장 큰 특징이다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.791-791
• /
• 2009

Hybrid air-foil magnetic bearing combines two oil free bearing technologies to take advantage of the strengths of each bearing with minimizing each other weaknesses. This paper presents bending mode vibration control of a flexible shaft supported by the hybrid air-foil magnetic bearing. An experiment set-up of a flexible shaft supported by the hybrid air-foil magnetic bearing is built. In order to verify the effectiveness of the hybrid bearing, unbalance responses of the flexible shaft supported by three different bearings: air-foil, magnetic and hybrid bearings are compared. Effect of load sharing between air-foil and magnetic bearings are investigated through changing control gain and offset displacements of magnetic bearing.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.198-203
• /
• 2002

A fuzzy logic controller design technique is proposed to apply for the control of flexible system under irregular disturbance. The fuzzy rules of $\ulcorner$Mode Selecting Fuzzy Controller$\lrcorner$ are constructed using displacement, velocity information and modal characteristics of the system. The frequency information of flexible system is picked up from $\ulcorner$Mode Selecting Unit$\lrcorner$ based on Fast-Fourier transform algorithm. Experiment is conducted to verify the proposed theoretical approach, Piezo ceramic and laser accelerometer are used as actuator and sensor in the experiments respectively