• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.11c
• /
• pp.21-38
• /
• 1999

Engineering properties of most polymers used in geosynthetics such as geogrid can be degraded by the chemical reaction (e.g., oxidization, ultraviolet rays, hydrolysis etc.), chemical and mechanical load, microorganism, and so on. In addition, polymer can be damaged by the compaction during construction, and the characteristic of tensile strength of polymer can be changed by the long-term creep effect. In this study, engineering properties of flexible geogrids which are manufactured by weaving/knitting the high-tenacity polymers such as polyester formed in a very open, grid-like configuration, coated with any one of a number of materials (e.g., PVC, latex, etc.), are investigated. Through the analysis of test results, the durability and the long-term design tensile strength of flexible geogrids are evaluated.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2830-2837
• /
• 2011

In this paper, a flexible track modeling of turnout was developed and dynamic characteristics of turnout rails were analyzed when a vehicle passed through the turnout. The flexible track modeling is effective to the stiffness and durability design of turnout, because it can capture the deformation and dynamic stress due to the collision of between wheels and rails when the vehicle move to the tongue rail. Also, a more accurate running safety can be obtained by considering the interaction between wheel and rail deformation. Solid finite elements were used for variable cross-sections of rails and the variation of rubber stiffness was modeled. The proposed flexible track modeling in this paper was verified to be valid by comparison with the experiment of the turnout system.

• Structural Engineering and Mechanics
• /
• v.6 no.7
• /
• pp.817-826
• /
• 1998

A finite element model based on the incremental endochronic theory for flexible pavement materials was developed in this study. Three grid systems with eight-node cubic isoparametric elements, and different loading steps were used to perform the calculations for a specimen of circular cylinder. The uniaxial stress experimental results on an asphalt mixture at $60^{\circ}C$ in SHRP conducted by University of California at Berkeley were used to check the ability of the derived numerical model. Then, the numerical results showed isotropic response and deviatoric response on the specimen in a three dimensional manner, which provided a better understanding for a deformed flexible material under the specified loading conditions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.203-203
• /
• 2009

Low temperature annealing for oxide TFTs including IGZO on PI substrate is the essential process to fabricate flexible display devices, since low heat-resistance on PI and PEN substrates limits the temperature range. Laser annealing is one of the promising candidates for low temperature process, and it has been used for various application in semiconductor and LCD fabrication. We irradiated laser to solution-based IGZO thin films on PI substrate were irradiated to laser beam, and investigated laser damage of PI layer. Based on transmittance analysis, wavelength(532nm) and scan speed(1000mm/s) is the optimized condition for laser irradiation about ink-Jet printed oxide TFTs on PI substrates.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.721-724
• /
• 2006

In the development of sheet-handling machinery, it is important to predict the static and dynamic behavior of the sheets with a high degree of reliability. Flexible media is very thin, very light and very flexible so it behaves geometric nonlinearity of large displacement and large rotation but small strain. In this paper, static and dynamic analyses of flexible media are performed by dynamic FEM considering geometric nonlinearity. Mass and tangent stiffness matrices based on the Co-rotational(CR) approach are derived and numerical simulations are performed by full Newton-Raphson(FNR) method and Newmark integration scheme.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.198-203
• /
• 2002

A fuzzy logic controller design technique is proposed to apply for the control of flexible system under irregular disturbance. The fuzzy rules of $\ulcorner$Mode Selecting Fuzzy Controller$\lrcorner$ are constructed using displacement, velocity information and modal characteristics of the system. The frequency information of flexible system is picked up from $\ulcorner$Mode Selecting Unit$\lrcorner$ based on Fast-Fourier transform algorithm. Experiment is conducted to verify the proposed theoretical approach, Piezo ceramic and laser accelerometer are used as actuator and sensor in the experiments respectively

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.2
• /
• pp.365-377
• /
• 2017

In this paper, we propose a method to identify the parameters of a rotorcraft slung load system using the modal characteristics of a flexible cable. The proposed method estimates the length of the cable and the mass of the payload by means of a frequency analysis. Dynamic equations of the slung load system with the flexible cable are derived using Udwadia-Kalaba equation (UKE) in order to build a simulation program, and the similarity of the simulated slung load movement is verified by comparison with flight test results. Using the computer simulation program, we show that the proposed method works well within various parameter ranges.

• Advances in robotics research
• /
• v.1 no.2
• /
• pp.141-154
• /
• 2014

Redundant parallel manipulators have some advantages over the nonredundant parallel manipulators. It is important to determine how many additional branches should be introduced. This paper studies whether one or two additional branches should be added to a 3-DOF parallel manipulator by comparing the flexible deformation of a 3-DOF parallel manipulator with one additional branch and that with two additional branches. The kinematic and dynamic models of the redundant parallel manipulator are derived and the flexible deformation is investigated. The flexible deformation of the manipulators with one additional branch and two branches is simulated and compared. This paper is helpful for designers to design a redundantly actuated parallel manipulator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.2
• /
• pp.202-210
• /
• 1994

In this paper, the network management system is implemented based on the analysis of reguirements and network operation and management for Flexible Automation. Network management is necessary, which controls and supervises the network resources in the communication network. By means of both analytical methods and queueing model, the delay time distributions due to the increasement of transmission data are obtained and analyzed. The operations of this network management system are certified through the test environments with the network adaptor and softwares for each layer.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.275-278
• /
• 2001

Research on the forced vibration control of a flexible GFR composite beam using $\mu$-synthesis is performed on this paper. Modal analysis method and modal coordinates are introduced to obtain the state equations of the structural system. Using these equations, Robust control algorithm using $\mu$-synthesis is adopted to suppress the forced vibration of a flexible beam since the designed controller can considered plant uncertainty and external disturbance. Constant disturbance which is generated by shaking the flexible beam as I's natural frequency is effectively rejected by a PZT actuator. Simulations and experiments are carried out with the designed controller and effectiveness of forced vibration suppression strategy is verified by results.