• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.155-163
• /
• 2005

Pressure heating rollers with temperature control were mounted to a flat cable laminating machine (FCLM). Pressure heating rollers should be heated up to the setting temperature $(175^{\circ}C)$ and kept on to producing good quality flexible flat cables (FFC). Existing Pressure heating rollers took more than 70minutes to the setting temperature and did not keep on the setting temperature in production. Temperature controller, electric power controller, material and diameter of rollers and heat capacities were changed to improve the temperature control of the pressure heat rollers for better production of the FFC. Thus, the reaching time to the setting temperature (RT), temperature stability time (TST) and temperature hunting (TH) were measured and compared with the existing pressure rollers case. The RT of A roller was shortened by 50minutes, and B roller was shortened by 15minutes. The TST of A roller was shortened by 13minutes, and B roller was shortened by 15minutes. The THs of both A and B rollers were settled up to ${\pm}5^{\circ}C$. Finally, the productivity of the FCLM and the quality of the FFC were increased.

• 한국산학기술학회논문지
• /
• 제10권1호
• /
• pp.1-5
• /
• 2009

본 논문에서는 Flexible Flat Cable을 생산하는 기계에서 작업시 텐션양을 조절하는 콘트롤러에 대해 하중과 모멘트를 변화시켜 적용하고 또한 텐션 콘트롤러 각각의 하중이 프레임에 집중할 때 처짐량을 알기 위하여 ANSYS로 구조해석을 수행하였다. 해석 결과로는 응력, 변형률과 최대변형량을 구하여 구조적 타당성을 검토하고 이를 설계에 반영한다.

• 자동차안전학회지
• /
• 제13권3호
• /
• pp.20-25
• /
• 2021

Flexural resistance evaluation of FFC (Flexible Flat Cable) was performed according to the grain size of rolled copper foil by adding 0.1wt% silver (Ag) and electrodeposited copper foil by slitting method after heat-treatment. These methods are aimed at enhancing the flexural durability of the FFC by growing the grain size of copper foil. By increasing the grain size of the copper foil and minimizing the miss-orientation at grain boundaries, the residual stress at the grain boundaries of the copper foil is reduced and the durability of the FFC is improved. Maximizing an average grain size of copper foil can be got a good solution in order to enhance the durability of the FFC or FPCB (Flexible Printed Circuit Board).

• 비파괴검사학회지
• /
• 제28권5호
• /
• pp.416-420
• /
• 2008

전자기음향변환기 분야에서는 나선형 RF 코일이 솔레노이드 코일보다 훨씬 널리 사용되고 있다. 그러나 실린더 구조물의 원거리 초음파검사용 자왜 스트립 도파변환기 분야에서는 솔레노이드 코일이 주로 사용되어왔다. 이는 아마도 낮은 주파수의(즉, 치수가 큰) 나선형 코일의 제작의 어려움에 기인하는 것 같다. 본 논문에서는 FFC(flexible flat cable)로 나선형 코일 자왜 스트립 도파변환기를 제작하는 방법을 기술한다. 기존의 솔레노이드 코일 변환기와의 비교실험을 통하여 나선형 코일 변환기가 훨씬 우수한 성능(감도, 신호-대-잡음 비, 도파방향조정능력)을 갖는다는 것을 실증한다.