• Tuberculosis and Respiratory Diseases
• /
• v.41 no.5
• /
• pp.494-503
• /
• 1994

Background: Fibrostenosis of large airway due to tuberculosis is one of the most perplexing clinical problems not only because it can lead to respiratory failure but also because of difficulty in the management. No one technique, such as balloon dilatation or insertion of self expandable metallic stent, has proved totally satisfactory in the management of fibrostenosis. We evaluated the effect of laser therapy in patient with severe fibrostenosis due to tuberculosis. Method: We classified the fibrostenosis to three types by bronchoscopic finding - the diaphragm type: stenosed by fibrous diaphragm, sparing the tracheobronchial wall, the collapse type: stenosed by collapse of the wall due to destruction of the cartilage, and the combined type: stenosed by nonspecific inflammatory scar tissue within internal lumen with collapse of the wall. We have treated 10 patients complaining dyspnea due to with severe fibrostenosis of the diaphargm or the combined type using a neodymiumyttrium aluminum garnet(Nd-Y AG) laser through a flexible bronchoscopy. Results: Eight of the 10 cases improved after laser therapy and maintained during a follow up period of average 31.9 months. All of the cases undergoing laser therapy showed no serious complication to need the therapy. Conclusion: The results of our present study indicate that the Nd-YAG laser therapy is an effective and safe method for the management of selective tuberculous fibrostenosis.

• Journal of Broadcast Engineering
• /
• v.14 no.6
• /
• pp.796-806
• /
• 2009

SVC (Scalable Video Coding) is a new video coding standard to provide convergence media service in heterogeneous environments with different networks and diverse terminals through spatial-temporal-quality combined flexible scalabilities. This paper presents the performance analysis on packet loss in the delivery of SVC over IP networks and an efficient adaptation method to packet loss caused by buffer overflow. In particular, SVC with MGS (Medium Grained Scalability) as well as spatial and temporal scalabilities is addressed in the consideration of packet-based adaptation since finer adaptation is possible with a sufficient numbers of quality layers in MGS. The effect on spatio-temporal quality due to the packet loss of SVC with MGS is evaluated. In order to minimize quality degradation resulted by packet loss, the proposed adaptation of MGS based SVC first sets adaptation unit of AU (Access Unit) or GOP corresponding to allowed delay and then selectively discards packets in order of importance in terms of layer dependency. In the experiment, the effects of packet loss on quantitative qualities are analyzed and the effectiveness of the proposed adaptation to packet loss is shown.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.2
• /
• pp.221-232
• /
• 2014

Many preliminary entrepreneurs are ready to start a business in every year. However, starting and preparing business have a lot of difficulties. Entrepreneurship is the most important factor for overcoming these difficulties. But, it is not easy to understand entrepreneurship to founders despite many research scholars. In this paper, we are focused on easy understanding of entrepreneurs. Instead of vague theories, we analyzed selected two companies in Korea. From the beginning until now, these companies have founders entrepreneurship and organization entrepreneurship. we studied these entrepreneurship factors with other Various causes. Analysis of two cases is summarized into three type. First, both companies had well-founded internal network system. Trained employees in internal network were flexible to meet the market conditions. Also, network effect made that employees can offer their idea and make discussions. Second, The company quickly recognized for organizational culture despite of most other companies recent awareness. This factor was the basic driving force for solving human resource management problem of small size companies. final factor is innovation capacity of these companies. Financial difficulties experienced of establishment is common to every company. However, two companies has continued to invest research and development despite of this financial problem. As a result, intellectual property management was accepted, as well as technology development. Clearly, these three factors are consistently applied since established and led to the company's continued growth and success.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.93-99
• /
• 2016

In this paper, we investigated the mechanical and electrical reliability of silver nanowire (AgNW) films. In particular, the durability and reliability of AgNW films were studied when the AgNW film was subjected to the bending deformation under current flow. The electrical durability of AgNW was evaluated by observing changes in heat generation and current density occurring in AgNW through voltage and current tests. The AgNW film showed a constant resistance change up to a bending radius of 2 mm and 200,000 cycles in the bending fatigue tests. The over-coating layer has an effect of improving the durability of the AgNW film. In the case of AgNW with the over-coating layer, heat was uniformly dissipated on the surface of AgNW film, whereas in the case of AgNW film without the over-coating layer, heat was generated locally. In the bending test under the current flow, the current density of the AgNW film was continuously decreased up to 52.4%. During bending, the AgNW was deformed due to mechanical deformation such as tensile, bending and sliding of the AgNW, consequently contact resistance of the AgNW was increased, leading to a electrical breakdown of AgNW by Joule heating. It was found that the application of the over-coating layer can improve the electrical and mechanical reliability of the AgNW film.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.5
• /
• pp.1025-1037
• /
• 2015

Flexible base isolation bearings that separate superstructure from ground have been widely used in the construction field because they make a significant contribution to increasing the fundamental period of the structure, thereby decreasing response acceleration transmitted into the superstructure. However, the established bearing devices installed to uphold the whole building give rise to some problems involved with failure and collapse due to lack of the capacity as modern structures are getting more massive and higher. Therefore, this study suggests new isolation bearings assembled with additional restrainers enabled to reinforcing and recentering, and then evaluates their performance to withstand the seismic load. The superelastic shape memory alloy (SMA) bars are installed into the conventional lead-rubber bearing (LRB) devices in order to provide recentering forces. These new systems are modeled as component spring models for the purpose of conducting nonlinear dynamic analyses with near fault ground motion data. The LRB devices with steel bars are also designed and analyzed to compare their responses with those of new systems. After numerical analyses, ultimate strength, maximum displacement, permanent deformation, and recentering ratio are compared to each model with an aim to investigate which base isolation models are superior. It can be shown that LRB models with superelastic SMA bars are superior to other models compared to each other in terms of seismic resistance and recentering effect.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.2
• /
• pp.219-235
• /
• 1993

To determine the compatibilities of soft liming materials with denture cleansers by measuring the flexibility and elasticity and investigating the surface changes, 4 self-curing acrylic resin soft lining materials and 1 heat-curing silicone soft lining material were evaluated. 3mm thick x 20mm diameter discs of soft lining materials were individually bonded to a hard acrylic resin base as per manufacturers’instructions. Using an Instron universal testing machine, a static stress of $2kg/cm^2$ was applied for 30secs., the strain in compression was measured, giving an indication of the material’s flexibility. Elastic recovery was measured at 10secs. After removal of stress. Surface changes were investigated with Stereomicroscope. Then the specimens were immersed in 4alkaline peroxide denture cleansers and water as control group, tests were carried out at 1 day, 2 days, 7 days, 14 days and 30 days. The results were as follows : 1. Alkaline peroxide denture cleansers caused considerable porosity on the surface of selfcuring acrylic resin soft lining materials, and the most affected by the cleansers were Viscogel, Coe-Soft, Coe-Comfort, Lynal, in that order. 2. There was significant difference in flexibility between each soft lining material except for Coe-Comfort and Visco-gel, and every soft lining material was significant difference in elasticity. Especially Molloplast-B and Lynal were less flexible and more elastic than other soft lining materials(p<0.05). 3. The denture cleansers increased the flexibility and elasticity of the soft lining materials compared with control group(p<0.05), and Denalan, Polident, Kleenite, Efferdent affected the soft lining materials in that order. 4. There was significant difference in flexibility between each denture cleanser except for Denalan and Polident(p<0.05). Though Denalan and Polident, Denalan and Kleenite did not show significant difference in elasticity, other denture cleansers showed significant difference among each other(p<0.05). 5. Clinically Coe-Comfort, Coe-Soft and Visco-gel were incompatible with alkaline peroxide denture cleansers, and Lynal would be used within only 2 weeks. But Molloplast-B was compatible with alkaline peroxide denture cleansers.

• Journal of Korea Water Resources Association
• /
• v.48 no.1
• /
• pp.45-55
• /
• 2015

In this study, when seawall or harbor gate is installed for coastal disaster prevention, a two-dimensional water analysis in the bay is carried out to consider the flood amount of river inflow and effect of harbor gate. The Yeongsan river and the port Mokpo area are selcected for the study region. Then, by analyzing the hydraulic characteristics of flood flow of the Yeongsan river, we analysed the compatibility of the results in the two-dimensional hydrodynamic model. A tw-odimensional water analysis were conducted for the four cases considering whether a harbor gate is installed or not, and whether the inland water boundary condition is considered or not, also with open sea boundary condition. The results of the two-dimensional water analysis shows that water level change near the port Mokpo area is mainly caused by the discharge of the estuary barrage of the Yeongsan river because the harbor gate was installed. In addition, it is revealed that the volume of reservoir created by the harbor gate and the estuary barrage is too much small compared to the volume of the discharge from the Yeongsan river. Therefore, when the harbor gate is installed in the open sea, we concluded that a flexible management between the harbor gate and the estuary barrage of the Yeongsan river is required. A initial water level of the bay and outflow from the harbor gate are proposed for disaster prevention in the coastal area of port Mokpo.

• Korean Journal of Materials Research
• /
• v.30 no.10
• /
• pp.566-572
• /
• 2020

In the recent years, thin film solar cells (TFSCs) have emerged as a viable replacement for crystalline silicon solar cells and offer a variety of choices, particularly in terms of synthesis processes and substrates (rigid or flexible, metal or insulator). Among the thin-film absorber materials, SnS has great potential for the manufacturing of low-cost TFSCs due to its suitable optical and electrical properties, non-toxic nature, and earth abundancy. However, the efficiency of SnS-based solar cells is found to be in the range of 1 ~ 4 % and remains far below those of CdTe-, CIGS-, and CZTSSe-based TFSCs. Aside from the improvement in the physical properties of absorber layer, enormous efforts have been focused on the development of suitable buffer layer for SnS-based solar cells. Herein, we investigate the device performance of SnS-based TFSCs by introducing double buffer layers, in which CdS is applied as first buffer layer and ZnMgO films is employed as second buffer layer. The effect of the composition ratio (Mg/(Mg+Zn)) of RF sputtered ZnMgO films on the device performance is studied. The structural and optical properties of ZnMgO films with various Mg/(Mg+Zn) ratios are also analyzed systemically. The fabricated SnS-based TFSCs with device structure of SLG/Mo/SnS/CdS/ZnMgO/AZO/Al exhibit a highest cell efficiency of 1.84 % along with open-circuit voltage of 0.302 V, short-circuit current density of 13.55 mA cm^-2, and fill factor of 0.45 with an optimum Mg/(Mg + Zn) ratio of 0.02.

• Restorative Dentistry and Endodontics
• /
• v.27 no.1
• /
• pp.77-86
• /
• 2002

Current composites are made with dimethacrylate monomers and silane-treated silica microfillers, either alone or with silane treated glass fillers The main reasons for clinical failure of dental composites are secondary caries, wear and fracture. Most of practitioner want to get a composite which is more tougher under occlusal stress, less polymerization contraction, and better handling properties in application clinically. The aim of this study was to investigate the influence of resin matrix with various flows on the physical proper-ties such as fracture toughness and degree of conversion of the experimental resins. It was hypothesized that flexible or tough resin composites can be designed by judicious choice of monomer composition Various flow resin matrices containing Bis-GMA, UDMA, and TEG-DMA were made by altering the pro-portion of the monomers. After the unfilled resins were light-cured for different light intensity, the fracture toughness(K$_{1c}$) was measured according to ASTM standard using the single edge notched geometry, and degree of conversion(DC) was measured by FTIR. And experimental composites were formulated with variations in the proportion of silanated quartz and strontium glass fillers as 60, 75, and 77wt%. Also, the physical properties of composites with various filer contents were evaluated as same manner. All resulting data were compared by ANOVA/Tukeys test at 0.05 level. The results were as follows; 1. The degree of conversion of high flow resin containing less Bis-GMA was higher than that of low flow unfilled resin 2. While the degree of conversion of unfilled resin was increased according to light intensity for polymerization, there was no significant increase with moderate and high light intensity. Also, the fracture toughness was not increased by high light intensity. 3. The fracture toughness was high in the low flow unfilled resin containing higher contents of Bis-GMA. 4. There was a significant increase for fracture toughness and a tendency for degree of conversion to be reduced when the content of fillers was increased. 5. In the experimental composites, the flow of resin matrix did not affected on the fracture toughness, even, which was decreased as increase of viscosity. These results showed that the physical properties of a dental composite could be attributed to the flow of resin matrix with relative content of monomers. Specific combination of resin monomers should be designed to fulfil the needs of specific indication for use.

• Cartoon and Animation Studies
• /
• s.32
• /
• pp.263-288
• /
• 2013

This research is about effects which frontal-flat cameras have on narrative films. This kind of confined camera angles make the audience have a sense of tension which is barely defined logically. I think the tension comes from aleatorism. The paper is a research on how aleatorism is working on what kind of value, and what kind of effects it has on narrative films. Russian Formalism had argued they had to meet aesthetic values by totally excluding narratives. It can be said that this was a practice for Brecht's estrangement that a sensitive arousal prohibits the audience immersing into excessive empathy and then make them have a reflective thought. But occasionally, optical arousals in narrative films induce deeper immersion into contemplation rather than reflective thought. I intend to find cases regarding this textualising Front-flat camera angles in narrative films and analysing their contents. To do this, I suggest a more specified definition of 'aleatorism'. Because the concept of the aleatorism is different between an aspect of static image like paintings or photographs and narrative contents like cinema. It is divided into approach through form and approach through content. And I also suggest an operative definition about 'Frontal-flat camera angle' with a several confinements because its formal definition is very flexible depending on audience. The case analysis will be done with a form of discourse discerning two aspects of form and content. Conclusively, Frontal-flat camera angle in narrative film is basically have an effect of attention by optical stimuli. But it cannot be said that this always means deterioration of narrative value. Depending on causality of episodes in the whole story, aleatorism which Frontal-flat camera angle has can support immersed contemplation regarding following narrative rather than reflective thought regarding amusing aesthetics.