• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.8
• /
• pp.803-809
• /
• 2012

It is necessary to predict the heating load in order to determine the optimal scheduling control of district heating systems. Heating loads are affected by many complex parameters, and therefore, it is necessary to develop an efficient, flexible, and easy to use prediction method for the heating load. In this study, simple specifications included in a building design document and the estimated temperature and humidity are used to predict the heating load on the next day. To validate the performance of the proposed method, heating load data measured from a benchmark district heating system are compared with the predicted results. The predicted outdoor temperature and humidity show a variation trend that agrees with the measured data. The predicted heating loads show good agreement with the measured hourly, daily, and monthly loads. During the heating period, the monthly load error was estimated to be 4.68%.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1367-1373
• /
• 2011

This research concerns the development of a compression/absorption high-temperature hybrid heat pump that uses a natural refrigerant mixture. Heat pumps based on the compression/absorption cycle offer various advantages over conventional heat pumps based on the vapor compression cycle, such as large temperature glide, temperature lift, flexible operating range, and capacity control. In this study, a lab-scale prototype hybrid heat pump was constructed with a two-stage compressor, absorber, desorber, desuperheater, solution heat exchanger, solution pump, liquid/vapor separator, and rectifier as the main components. The hybrid heat pump system operated at 10-kW-class heating capacity producing hot water whose temperature was more than $90^{\circ}C$ when the heat source and sink temperatures were $50^{\circ}C$. Experiments with various $NH_3/H_2O$ mass fractions and compressor/pump circulation ratios were performed on the system. From the study, the system performance was optimized at a specific $NH_3$ concentration.

• Korean Journal of Environmental Biology
• /
• v.25 no.4
• /
• pp.289-296
• /
• 2007

Di-(ethyhexyl) phthalate (DEHP), commonly used as a plasticizer for manufacturing flexible vinyl products, has been the topic of extensive research, especially concerning endocrine disrupting properties. Metallothionein (MT) is a low molecular weight (6,000$\sim$7,000 Da), cysteine-rich (22$\sim$23%), metal-binding protein and is known to be induced by extrinsic factors such as chemical agents and stresses. Some of the known function of MT include detoxification of heavy metals and alkylating agents and neutralization of free radicals. Nonetheless, the definitive physiological function of MT are still unknown. This study was carried out to investigate the effects of DEHP on the ultrastructural changes and the expression of MT of the rat liver. The rats were orally intubated with either corn oil (experimental control) or 0.5 mg, 1.5 mg and 4.5 mg DEHP kg$^{-1}$ day$^{-1}$ in 0.5 mL of corn oil for 15 days before sacrificing and sampling. DEHP induced mild ultrastrctural changes of some cell organelles such as rough endoplasmic reticulum, mitochondria, lysosomes and peroxisomes in the rat liver treated with DEHP. In the respect of immunogold labelling and Western blotting, MT expression of the liver tissue was up-regulated by DEHP. In conclusion, DEHP has effects on the ultrastructures and hepatic function for MT expression in rat.

• Journal of Applied Biological Chemistry
• /
• v.60 no.3
• /
• pp.227-234
• /
• 2017

Inflammatory bowel disease (IBD) is including Crohn's disease and ulcerative colitis. Sulfasalazine commonly used in IBD, possibly has various side effects after high dosage and long term intake. The present study aimed to investigate the sulfasalazine and combination with herbal medicine on 2,4,6-trinitrobenzene sulfonic acid (TNBS)-induced in mice model. TNBS-induced mice were injected through a flexible catheter 4 cm in length 1.6 mg TNBS. Animals were divided into five groups (n=12): Normal group, TNBS control group, Sulfasalazine (30 mg/kg) group, Sulfasalazine (60 mg/kg) group, Sulfasalazine (30 mg/kg)+Cinnamomi cortex and Bupleuri radix mixture (30 mg/kg) (SCB) group. Administration groups were fed extract during 7 days. The inflammatory, and apoptotic protein levels were determined using western blotting. SCB treatment showed an outstanding effectiveness in counteracting the IBD, as assessed by reduction of body weight loss, down-regulation of pro-inflammatory proteins and cytokines, and by inhibition of proteins related to apoptosis. This is the first report that sulfasalazine and Cinnamomi cortex plus Bupleuri radix mixture improve the severity of experimental IBD through the inhibition of both inflammation and apoptosis. We confirm that the SCB treatment instead of sulfasalazine alone may be promising as an alternative therapeutic plan against IBD, without any evidence of adverse effects.

• Journal of Korea Spatial Information System Society
• /
• v.8 no.1 s.16
• /
• pp.93-106
• /
• 2006

A Grid Database is a database management system to process effectively and use the distributed data in a grid computing environment. Spatial data is more important than other general data according to the local characteristics and requires a large storage. The grid database can be used as the optimal system for the management of the spatial data. However, contrary to the conventional distributed database systems, the Grid Database which guarantees the local autonomy has a possibility not to provide an effective system, or it is impossible to use a centralized management environment. In order to allow flexible responses to a dynamically changing environment, it is required to use effectively reorganized method. In this paper, hierarchical reorganization method is presented for dynamic reorganization in a grid database. When the reorganization is conducted, an organizer is created to collect the information of databases. In addition, the organizer which is constructed by the hierarchical structure supports information communication and reorganization, and then it allows the support of regional reorganization operation and effective balance control. The performance assessment of the proposed method shows that the processing capacity is increased after the reorganization.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.288-289
• /
• 2011

Indium Tin Oxide (ITO) is a typical highly Transparent Conductive Oxide (TCO) currently used as a transparent electrode material. Most widely used deposition method is the sputtering process for ITO film deposition because it has a high deposition rate, allows accurate control of the film thickness and easy deposition process and high electrical/optical properties. However, to apply high quality ITO thin film in a flexible microelectronic device using a plastic substrate, conventional DC magnetron sputtering (DMS) processed ITO thin film is not suitable because it needs a high temperature thermal annealing process to obtain high optical transmittance and low resistivity, while the generally plastic substrates has low glass transition temperatures. In the room temperature sputtering process, the electrical property degradation of ITO thin film is caused by negative oxygen ions effect. This high energy negative oxygen ions(about over 100eV) can be critical physical bombardment damages against the formation of the ITO thin film, and this damage does not recover in the room temperature process that does not offer thermal annealing. Hence new ITO deposition process that can provide the high electrical/optical properties of the ITO film at room temperature is needed. To solve these limitations we develop the Magnetic Field Shielded Sputtering (MFSS) system. The MFSS is based on DMS and it has the plasma limiter, which compose the permanent magnet array (Fig.1). During the ITO thin film deposition in the MFSS process, the electrons in the plasma are trapped by the magnetic field at the plasma limiters. The plasma limiter, which has a negative potential in the MFSS process, prevents to the damage by negative oxygen ions bombardment, and increases the heat(-) up effect by the Ar ions in the bulk plasma. Fig. 2. shows the electrical properties of the MFSS ITO thin film and DMS ITO thin film at room temperature. With the increase of the sputtering pressure, the resistivity of DMS ITO increases. On the other hand, the resistivity of the MFSS ITO slightly increases and becomes lower than that of the DMS ITO at all sputtering pressures. The lowest resistivity of the DMS ITO is $1.0{\times}10-3{\Omega}{\cdot}cm$ and that of the MFSS ITO is $4.5{\times}10-4{\Omega}{\cdot}cm$. This resistivity difference is caused by the carrier mobility. The carrier mobility of the MFSS ITO is 40 $cm^2/V{\cdot}s$, which is significantly higher than that of the DMS ITO (10 $cm^2/V{\cdot}s$). The low resistivity and high carrier mobility of the MFSS ITO are due to the magnetic field shielded effect. In addition, although not shown in this paper, the roughness of the MFSS ITO thin film is lower than that of the DMS ITO thin film, and TEM, XRD and XPS analysis of the MFSS ITO show the nano-crystalline structure. As a result, the MFSS process can effectively prevent to the high energy negative oxygen ions bombardment and supply activation energies by accelerating Ar ions in the plasma; therefore, high quality ITO can be deposited at room temperature.

• Journal of the Korean association of regional geographers
• /
• v.21 no.2
• /
• pp.379-393
• /
• 2015

The fire damage has been increased as the frequency of fire incidence decreases with increasing in death and economic loss. Local governments are dependent on the activities of fire-fighters with crude preparedness and prevention for fire incidence. Most of researches on fire safety have focused on descriptive statistics which show general trends in fire incidence and condition. Here we tried to make a mutual causal model for fire damage, to make three big hypotheses with laying three small hypotheses under each big hypothesis. Five years statistics from public domains in the form of hardcopy or softcopy were collected and fifteen independent variables were selected to explain the number of death, the number of fire incidence and the amount of economic loss from fire incidence. The significances of statistics are different among the regional characteristics. The hypotheses were partially rejected and the meanings of rejected factors will refresh the tentative prejudice. It is necessary to revise the principle that the number of population and size of area are regarded as the most important criteria to allocate resources for fire control and to have the criteria flexible with results of our research such as the number of the weak to fire disaster.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.12
• /
• pp.1380-1393
• /
• 2010

This paper presents a design, fabrication and the test results of planar active electronically scanned array(AESA) radar prototype for airborne fighter applications using transmit/receive(T/R) module hybrid technology. LIG Nex1 developed a AESA radar prototype to obtain key technologies for airborne fighter's radar. The AESA radar prototype consists of a radiating array, T/R modules, a RF manifold, distributed power supplies, beam controllers, compact receivers with ADC(Analog-to-Digital Converter), a liquid-cooling unit, and an appropriate structure. The AESA antenna has a 590 mm-diameter, active-element area capable of containing 536 T/R modules. Each module is located to provide a triangle grid with $14.7\;mm{\times}19.5\;mm$ spacing among T/R modules. The array dissipates 1,554 watts, with a DC input of 2,310 watts when operated at the maximum transmit duty factor. The AESA radar prototype was tested on near-field chamber and the results become equal in expected beam pattern, providing the accurate and flexible control of antenna beam steering and beam shaping.

• 대한공업교육학회지
• /
• v.41 no.2
• /
• pp.89-118
• /
• 2016

In this study, the model of Turtle Ship, which is evaluated as one of the world's first ironclad ship in battle as well as the traditional scientific and technological heritage in Korea, was combined with the Physical Computing Platform(Arduino and App Inventor) that enables students to learn the basic concepts of IT in an easy and fun way. Thus, this study contrived the Physical Computing Platform-based Turtle Ship model which will make the students of Industrial Specialized High School develop the technological literacy and humanities-based knowledge through flexible education out of stereotype and single subject as well as enhance the potential of creative convergence education. The following is a summary of the main results obtained through this study: First, Arduino-based Main-controller design and making is helpful to learn of the hardware and software knowledge about EEC(Electron Electronics Control) and to confirm the basic characteristics and performance of interaction of Arduino and actuators. Second, The fundamental Instructional environments of abilities such as implementing EEC systems, thinking logically, and problem-solving skills were provided by designing of pattern diagram, designing an actuator circuit and making, the creation of sketches as technical programming and developing of mobile app. Thirdly, This is physical computing platform based Turtle ship model that will enable students to bring up their technological literacy and interest in the cultural heritage.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.12
• /
• pp.549-560
• /
• 2015

There is a wide variety of data quality attributes such as the ones proposed by the ISO/IEC organization and also by many other domestic and international institutions. However, it takes considerable time and costs to apply those criteria and guidelines to real environment. Therefore, it needs to define data quality evaluation attributes which are easily applicable and are not influenced by organizational environment limitations. The purpose of this paper is to derive data quality attributes and order of their priorities based on customer requirements for managing the process systematically and evaluating the data quantitatively. This study identifies the customer cognitive constructs of data quality attributes using the RGT(Repertory Grid Technique) based on a Korean quality standard model (DQC-M). Also the correlation analysis on the identified constructs is conducted, and the evaluation attributes is prioritized and ranked using the AHP. As the results of this paper, the consistent system, the accurate data, the efficient environment, the flexible management, and the continuous improvement are derived at the first level of the data quality evaluation attributes. Also, Control Compliance(13%), Regulatory Compliance(10%), Requirement Completeness(9.6%), Accuracy(8.4%), and Traceability(6.8%) are ranked on the top 5 of the 19 attributes in the second level.