• 대기
• /
• 제17권4호
• /
• pp.339-348
• /
• 2007

Global Environment Laboratory at Yonsei University in Seoul ($37.57^{\circ}N$, $126.95^{\circ}E$) has carried out the ozone layer monitoring program in the framework of the Global Ozone Observing System of the World Meteorlogical Organization (WMO/GAW/GO3OS Station No. 252) since May of 1984. The daily measurements of total ozone and the vertical distribution of ozone amount have been made with the Dobson Spectrophotometer (No.124) on the roof of the Science Building on Yonsei campus. From 2004 through 2006, major parts of the manual operations are automated in measuring total ozone amount and vertical ozone profile through Umkehr method, and calibrating instrument by standard lamp tests with new hardware and software including step motor, rotary encoder, controller, and visual display. This system takes full advantage of Windows interface and information technology to realize adaptability to the latest Windows PC and flexible data processing system. This automatic system also utilizes card slot of desktop personal computer to control various types of boards in the driving unit for operating Dobson spectrophotometer and testing devices. Thus, by automating most of the manual work both in instrument operation and in data processing, subjective human errors and individual differences are eliminated. It is therefore found that the ozone data quality has been distinctly upgraded after automation of the Dobson instrument.

• Tribology and Lubricants
• /
• 제30권3호
• /
• pp.139-145
• /
• 2014

Nowadays, most micro-patterns are manufactured during flow line production. However, a conventional rotary chemical mechanical polishing (CMP) system has a limited throughput for the fabrication of large and flexible electronics. To overcome this problem, we propose a novel linear roll-CMP system for the planarization of large-area electronics. In this paper, we present a statistical analysis on the linear roll-CMP process of copper-clad laminate (CCL) to determine the impacts of process parameters on the material removal rate (MRR) and its non-uniformity (NU). In the linear roll-CMP process, process parameters such as the slurry flow rate, roll speed, table feed rate, and down force affect the MRR and NU. To determine the polishing characteristics of roll-CMP, we use Taguchi's orthogonal array L16 (44) for the experimental design and F-values obtained by the analysis of variance (ANOVA). We investigate the signal-to-noise (S/N) ratio to identify the prominent control parameters. The "higher is better" for the MRR and "lower is better" for the NU were selected for obtaining optimum CMP performance characteristics. The experimental and statistical results indicate that the down force and roll speed mainly affect the MRR and the down force and table feed rate determine the NU in the linear roll-CMP process. However, over 186.3 N of down force deteriorates the NU because of the bending of substrate. Roll speed has little relationship to the NU and the table feed rate does not impact on the MRR. This study provides information on the design parameter of roll-CMP machine and process optimization.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.311-311
• /
• 2013

The resistance switching memory devices have several advantages to take breakthrough for the limitation of operation speed, retention, and device scale. Especially, the metal-oxide materials such as ZnO are able to fabricate on the flexible and visible transparent plastic substrate. Also, the quantum dots (QDs) embedded in dielectric layer could be improve the ratio between the low and the high resistance becauseof their Coulomb blockade, carrier trap and induced filament path formation. In this study, we irradiated 0.2-MeV-electron beam on the ZnO/QDs/ZnO structure to control the defect and oxygen vacancy of ZnO layer. The metal-oxide QDs embedded in ZnO layer on Pt/glass substrate were fabricated for a memory device and evaluated electrical properties after 0.2-MeV-electron beam irradiations. To formation bottom electrode, the Pt layer (200 nm) was deposited on the glass substrate by direct current sputter. The ZnO layer (100 nm) was deposited by ultra-high vacuum radio frequency sputter at base pressure $1{\times}10^{-10}$ Torr. And then, the metal-oxide QDs on the ZnO layer were created by thermal annealing. Finally, the ZnO layer (100 nm) also was deposited by ultra-high vacuum sputter. Before the formation top electrode, 0.2 MeV liner accelerated electron beams with flux of $1{\times}10^{13}$ and $10^{14}$ electrons/$cm^2$ were irradiated. We will discuss the electrical properties and the physical relationships among the irradiation condition, the dislocation density and mechanism of resistive switching in the hybrid memory device.

• 화약ㆍ발파
• /
• 제34권4호
• /
• pp.10-18
• /
• 2016

화약 발파는 물질이 연소할 때 발생하는 에너지를 파괴 동력으로 이용한다. 화약은 흑색화약으로부터 강력한 위력을 가진 다이너마이트에 이어 취급의 안정성도 향상시킨 에멀션 폭약의 개발에까지 이르고 있으며, 또한 뇌관과 같은 화공품도 공업뇌관과 도화선으로부터 전기 뇌관, 비전기 뇌관에 이어 초정밀 시차를 제어할 수 있는 전자뇌관의 개발에까지 발전되어 왔다. 그러나 아무리 성능이 우수한 화약과 뇌관을 사용한다고 하더라도 좋은 발파 결과를 얻을 수 있는 것은 아니다. 실제 현장의 다양한 조건을 어떻게 고려하여 설계 및 시공에 활용할 것인가는 전적으로 발파기술자의 손에 달려 있다. 암반을 대상으로 하는 발파는 많은 미지의 영향 변수들 때문에 실제 현장에서의 경험에 기초한 접근 방법이 매우 중요하다. 또한 현장에서의 관찰 결과를 분석하고 실험을 통해 정량화된 경험적 모델을 도출하거나, 이론적 근거를 정립하여 이론적 모델로 발전시키는 것은 발파 설계에의 활용뿐만 아니라 새로운 기술개발에 대한 아이디어를 제공한다는 측면에서도 필요하다. 본 논문에서는 발파 분야에서 개발된 몇 가지 경험적 모델과 이론적 모델들을 통해 활용 시 주의해야 할 사항들이 고찰되었다.

• 대한의용생체공학회:의공학회지
• /
• 제26권5호
• /
• pp.343-349
• /
• 2005

Continuously motivating people to exercise regularly is more important than finding a way out of barriers such as lack of time, cost of equipment, lack of nearby facilities, and poor weather. Our proposed system presents practicable methods of motivation through a diverse exercise aid system. The Health Improvement and Management System (all-in-one system which saves space and maintenance costs) measures and evaluates a diverse body shape analysis and physical fitness test and directs users to automated personalized exercise prescription which is prescribed by the expert system of three types of exercise templates: aerobics, anaerobics, and leisure sports. Automated personalized exercise prescriptions are built into XML based documents because the data needs to be in the form of flexible, expansible, and convertible structures in order to process various exercise templates, BIOFIT, a digital exercise trainer, monitors and provides feedback on the physiological parameters while users are working out in the gymnasium. If these parameters do not range within the prescribed target zone, the device will alarm users to control the exercise and make the exercise trainer adjust systemically the proper exercise level. Numeric health information such as the report of the physical fitness test and the exercise prescription makes people stay interested in exercising. In addition, this service can be delivered through the Internet.

• 한국응용과학기술학회지
• /
• 제29권3호
• /
• pp.531-542
• /
• 2012

본 논문은 바이오폴리우레탄의 연구동향에 관한 것이다. 바이오폴리우레탄은 원료 중의 식물유 폴리올과 이소시아네이트의 중부가 고분자이다. 피마자유의 주성분은 히드록시기를 갖는 리시놀산의 트리글리세라이드이다. 이외의 히드록시기가 없는 식물유는 이중결합 위치에서 에폭시화 후 고리열림, 히드로포르밀화 후 수소첨가, 가오존분해 후 수소첨가, 티올-엔 반응으로 히드록시기를 부여한다. 폴리올의 반응성 및 마이크로도메인의 모폴로지 조절을 위한 하이퍼브랜치 폴리올, 일차 알코올 폴리올, 다당류 폴리올이 있다. 의료용의 생분해성 폴리락트산 폴리올, 가수분해 방지용 지방산 다이머 폴리올, 이온성 기를 함유한 수 분산 폴리우레탄용 폴리올이 있다. 바이오폴리올을 이용한 바이오폴리우레탄은 경질 및 연질 폼, 코팅제, 접착제, 실런트, 엘라스토머에 쓰인다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.11.2-11.2
• /
• 2011

Polymer based organic photovoltaics have attracted a great deal of attention due to the potential cost-effectiveness of light-weight and flexible solar cells. However, most BHJ polymer solar cells are not thermally stable as subsequent exposure to heat drives further development of the morphology towards a state of macrophase separation in the micrometer scale. Here we would like to show three different approaches for developing new electroactive polymers to improve the thermal stability of the BHJ solar cells, which is a critical problem for the commercialization of these solar cells. For one of the examples, we report a new series of functionalized polythiophene (PT-x) copolymers for use in solution processed organic photovoltaics (OPVs). PT-x copolymers were synthesized from two different monomers, where the ratio of the monomers was carefully controlled to achieve a UV photo-crosslinkable layer while leaving the ${\pi}-{\pi}$ stacking feature of conjugated polymers unchanged. The crosslinking stabilizes PT-x/PCBM blend morphology preventing the macro phase separation between two components, which lead to OPVs with remarkably enhanced thermal stability. The drastic improvement in thermal stabilities is further characterized by microscopy as well as grazing incidence X-ray scattering (GIXS). In the second part of talk, we will discuss the use of block copolymers as active materials for WOLEDs in which phosphorescent emitter isolation can be achieved. We have exploited the use of triarylamine (TPA) oxadiazole (OXA) diblock copolymers (TPA-b-OXA), which have been used as host materials due to their high triplet energy and charge-transport properties enabling a balance of holes and electrons. Organization of phosphorescent domains in TPA-b-OXA block copolymers is demonstrated to yield dual emission for white electroluminescence. Our approach minimizes energy transfer between two colored species by site isolation through morphology control, allowing higher loading concentration of red emitters with improved device performance. Furthermore, by varying the molecular weight of TPA-b-OXA and the ratio of blue to red emitters, we have investigated the effect of domain spacing on the electroluminescence spectrum and device performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1745-1748
• /
• 2005

Near-infrared spectroscopy (NIRS) can be used to monitor brain activation by measuring changes in the concentration of oxy- and deoxy-hemoglobin (Hb) by their different spectra in the near-infrared range. Because NIRS is a noninvasive, highly flexible and portable device, it is very suitable to study brain activation when a human repeatedly performs a manipulative task, and possibly provides useful information to construct human adaptive mechatronics (HAM). There is some evidence that the dorsolateral prefrontal cortex (DLPFC) plays a major role in working memory and it is proposed that the use of working memory decreases as a human develops manipulative skills. In the present study, we investigated the activation of the dorsolateral prefrontal cortex (DLPFC) of the brain in Brodmann's areas 9 and 46 in drawing tasks to examine whether NIRS can measure the changes of DLPFC activation as a human develops manipulative skills. Subjects performed a mirror image drawing task and a square drawing task by ones' left hands. In the mirror image task the subject drew following a star shape based on a mirror image of it, but square drawing did not involve mirror image and was estimated to be simpler. The changes of the concentration of oxy-Hb was higher in the mirror image drawing than the square drawing in most subjects. The changes of oxy-Hb decreased as the subject repeated the drawing task in most subjects. In conclusion, The activation of DLPFC measured by NIRS can reflect the brain activity in the development of manipulative skills.

• 한국지리정보학회지
• /
• 제7권3호
• /
• pp.90-98
• /
• 2004

연안 양식어장의 정보 관리에 실용적인 지리정보시스템(GIS)을 적용함으로써 어업종사자와 연안 관리자에게 실현 가능한 관리방안을 제시하고 수산업 발전을 위한 유연한 의사결정의 기반을 마련하고자 하였다. 연안 양식어장의 효과적 관리는 경제적 실행 가능성과 운영비용에 영향을 미치며 양식 대상생물의 생산 및 사망률과도 관계가 있으므로 매우 중요하다. GIS는 양식어장 정보의 효율적인 관리도구로서 개인 및 공공분야에서 폭넓게 사용되고 있으며 해양수산 관련분야에서도 활발히 적용되고 있다. 본 연구에서는 진해만을 대상으로 연안 양식장 자료의 3차원 가시화 모듈을 구축하였다.

• 동아시아식생활학회지
• /
• 제20권1호
• /
• pp.60-68
• /
• 2010

This study was conducted to evaluate the effects of lotus leaf powder on the qualitative characteristics of Jeung-Pyun (traditional Korean fermented rice cake). To achieve the highest volume and specific volume, 4% lotus leaf powder was required. However the moisture content dropped as the lotus leaf powder was added to the mixture. In addition, pH of Jeung-Pyun decreased the longer it was allowed to ferment, but the pH increased after steaming. We also evalusted the transparency of Jeung-Pyun as lotus leaf powder was added. As the lotus leaf powder was added, the L-value decreased and the a-value and b-value increased. Additionally, the hardness, chewiness and brittleness of Jeung-Pyun increased as more lotus leaf powder was added (p<0.05), but the springiness and cohesiveness did not change. The Jeung-Pyun also became darker and the cells became less uniform as the level of lotus powder increased. A control group of Jeung-Pyun without lotus leaf powder produced the strongest takju flavor, while the sourness decreased as more lotus leaf powder was added. The addition of 2% and 4% lotus leaf powder resulted in the chewiest and most flexible Jeung-Pyun. The results of this evaluation showed that Jeung-Pyun with 4% lotus leaf powder had the best appearance, flavor, texture, and taste, and was generally the most preferred Jeung-Pyun. Finally, SEM evaluation of the Jeung-Pyun, revealed that, higher levels of lotus leaf powder resulted in larger and less consistent pores and bubbles.