• ETRI Journal
• /
• v.33 no.1
• /
• pp.18-26
• /
• 2011

The necessity for services of emergency communication systems to be uninterrupted and reliable has brought forward strict requirements for express software upgrades of base stations. Based on reconfigurability technology, this paper presents a protocol reconfiguration scheme for emergency communication base stations. By introducing the concept of 'local safe state,' the proposed scheme could make the updating and replacement of the protocol software flexible and maintain interactions during the updating procedure to achieve seamless system upgrades. Further, taking TETRA protocol stack and VxWorks operating system as an example, specific processes and realization methods of reconfiguration are proposed in this paper, along with the measurements of the factors impacting on the system performance. Simulation results show that, compared with traditional technology, the method proposed significantly improves the system efficiency and does not interrupt system services.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.472-478
• /
• 2000

The vibration of the hard disk drive (HDD) systems, which comprises flexible disks, flexible shafts, bearings, and base structures, are analyzed by a finite element method (FEM) to cope with complicated coupling effects between them. The natural frequencies and mode shapes of the uncoupled, axial and bending coupled vibrations are calculated. Modal testing of the HDD systems is performed to validate the finite element analysis (FEA) results. Good agreement was obtained between the computed and experimental results. Sizing design sensitivity analysis (DSA) of the system was performed with the thickness of base structure and bearing stiffness as design variables. The DSA results tell how can I increase or decrease eigenvalue of the system effectively.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.571-577
• /
• 2003

This research proposes a finite element method to determine the natural vibration characteristics of the spinning disk-spindle system in a HDD including the flexibility of supporting structure. Finite element equations of each substructure are derived with the introduction of consistent variables to satisfy the geometric compatibility at the internal boundaries. The natural frequencies and modes from the global asymmetric matrix equations of motion are determined by using the implicit restarted Arnoldi iteration method. The validity of the proposed method is verified by the experimental modal testing. It also shows that the flexibility of base plate plays an important role to determine the natural frequencies of the spinning disk-spindle system in a HDD.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.1
• /
• pp.82-89
• /
• 2003

A robust motion control method is proposed fur the point-to-point position control of a XY positioning system which consists of a base cart, elastic ben and moving mass. The horizontal motion controller consists of the feedforward controller to suppress the single mode vibration of the elastic beam and the feedback controller to get the high-accuracy positioning performance of the base cart. Input preshaping vibration suppression method based on system modeling with analytic frequency equation is proposed and integrated into the robust internal-loop compensator(RIC) to increase the robustness of the whole closed-loop system The vertical motion controller is proposed based on the dual RIC structure. Through experiments, it is shown that the proposed method can stabilize the system and suppress the vibration in the presence of uncertainties and disturbances.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.15 no.4
• /
• pp.33-37
• /
• 2007

In this paper, a dynamic analysis of a helicopter landing gear with considering flexible structural modes has been investigated. The main body of the helicopter has been modeled as a flexible body using FEM code, then a few selected vibration modes of the helicopter main body have been used as basis for the dynamic analysis of the helicopter landing gear. The simulation of dynamic analysis was carried out on the base of ADAMS aircraft module. It has been found by a series of simulation that the flexible structural modes has a significant effect on the dynamic characteristics of helicopter landing gear as the flexibility of the main body is increased.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.228-232
• /
• 2004

This paper is to identify the position of random disturbance on flexible dynamic system, and the position of the piezo ceramic actuator 0 minimize tip response. Correlation of the output signals from each parts on flexible system is used to identify the position of random disturbance. Except the correlation with an output signal from the position of random disturbance, other correlations have time delay. This is a base idea to identify the position on this study.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.185-189
• /
• 1992

This paper prsents an end-point control of a one-link flexible arm with a payload by using closed loop control. Tip position of arm is shifted by the base motion according to DC servomotor, whivh is driven by a feedback signal composed of the tip displacement and the estimated tip velocity. The shifting problem of the arm from initial position to desired position is considered by the variation of the displacement gain Gd and velocity agin Gv. Theoretical results are obtained by applying the method of the Laplace transform to the governing equations and the method of numerical inversion. This system is composed of a flexible arm with payload, DC servomotor, and a ballscrew mechanism. The flexible arm is mounted on a mobile stage driven by a servomotor and ballscrew. In controlling the tip displacement of flexible arm, the fundamental bode vibration is supressed more rapidly with an increase of the velocity feedback gain Gv and the feedback displacemenmt gain Gd. Theretical responses are approximately in good agreement with those obtained experimentally.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.9 no.3
• /
• pp.185-190
• /
• 2009

A scheme of expert system based on iterative learning control is proposed. Iterative learning control can obtain control experience from the historical data to build the knowledge base of expert system. Considering some uncertain factors, a flexible measure is adopted in iterative learning control (ILC). Simulation proves the feasibility and effect of the air conditioning control expert system based on flexible iterative learning control (F-ILC). Finally, a feedback compensation unit is incorporated against irregular heavy disturbance.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.437-444
• /
• 2006

Recently, as large structures become lighter and more flexible, the necessity of structural control for reducing excessive displacement and acceleration due to seismic excitation is increased. As a means to minimize seismic damages, various base isolation systems are adopted or considered for adoption. In this study, a base isolation system using Magneto-Sensitive(MS) rubbers is proposed and shown to effectively protect structures against earthquakes. The MS Rubber is a class of smart controllable materials whose mechanical properties change instantly by the application of a magnetic field To demonstrate the advantages of this approach, the MS Rubber isolation system is compared to Lead-Rubber Bearing(LRB) isolation systems and judged based on computed responses to several historical earthquakes. The MS Rubber isolation system is shown to achieve notable decreases in base drifts over comparable passive systems with no accompanying increase in base shears or in accelerations imparted to the superstructure.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.4
• /
• pp.87-92
• /
• 2018

One of the problems with the base station equipment is that there is a large difference between the replacement time of the hardware equipment such as the base station equipment and the radio access equipment, and the evolution period of the communication standard. Therefore, the base station communication platform must be flexible enough to handle the evolving communication standards after purchase. Recent research on reconfigurable communications platforms has focused on the efficient architecture of the communications platform to meet these requirements through software downloads while still using existing hardware. This paper presents a prototype of a base station communications platform based on the ETSI standard reconfigurable architecture. The communication platform presented in this paper is implemented as an ETSI standard reconfigurable architecture using a general-purpose DSP (Digital Signal Processor). In the implemented prototype, we verify the real-time feasibility of communication protocol updates through software reconfiguration.