• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.2
• /
• pp.73-83
• /
• 2011

In the manufacturing system, production-planning is very important in effective management for expensive production facilities and machineries. To enhance efficiency of Manufacturing Execution System(MES), a manufacturing system that reduces the difference between planning and execution, certain production-planning needs a dispatching rule that is properly designed for characteristic of work information and there should be a appropriate selection for the rule as well. Therefore, in this paper dispatching rule will be selected by several simulations based on characteristics of work information derived from process planning data. By constructing information that are from simulation into ontology, one of the knowledge-based-reasoning, production planning platform based on the selection of dispatching rule will be demonstrated. The platform has strength in its wider usage that is not limited to where it is applied. To demonstrate the platform, RacerPro and Prot$\acute{e}$g$\acute{e}$ are used in parts of ontology reasoning, and JAVA and FlexChart were applied for production-planning simulation.

• Journal of Korean Academy of Nursing
• /
• v.36 no.7
• /
• pp.1111-1122
• /
• 2006

Purpose: This study examined the effects of aerobic exercise using a flex band on the improvement of physical functions & body image in breast cancer women undergoing radiation therapy after a mastectomy. Method: Women with breast cancer(n =26) were assigned to an experimental group(EG, n = 15) and control group(CG, n = 11). The E.G participated in an aerobic exercise program with a 60% to 80% intensity of maximal heart rate for 25 minutes during the main exercise, 3 times per week, for 6 weeks. The EG did not exercise regularly for 3 months before participating in this program. The CG received no exercise treatment during the research period. Data were analyzed using the $x^2-test$ and Mann-Whitney U test by the SPSS version 11.0 program at a 5% significant level. Results: Group analysis revealed that the EGwomen had significantly more improved cardio-pulmonary functions, ROM of the affected shoulder joint, and body image compared to the CG, Conclusion: Aerobic exercise using a flex band may be an effective rehabilitative measure for mastectomy women with respect to cardio-pulmonary functions, ROM, & body image. Further studies are recommended to study early rehabilitation programs within 10 days post-operatively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.10
• /
• pp.1109-1114
• /
• 2015

In this paper, design and implementation of RIA(: Rich Internet Application) technology, a CMS based on either of the Adobe Flex framework. Flex existing HTML + CSS + Javascript, etc. it can be easily added to a variety of visual components on a markup language consisting allow you to implement a more dynamic website. The HTTP request is processed using the Spring Framework of MVC based. Spring Framework provides a number of services for the development of a dynamic website to open source framework for the Java platform. It is being used as a standard-based technology for e-government framework used to develop recommendations and Republic of Korea during the Web service public institutions. Extensive production becomes increasingly thin web can be more efficiently managed, and will provide convenience to the user.

• Progress in Medical Physics
• /
• v.30 no.4
• /
• pp.89-93
• /
• 2019

Purpose: This study aims to develop new markers based on silicone rubber and urethane rubber to enhance visibility in low magnetic field magnetic resonance (MR) imaging. Methods: Four types of markers were fabricated using two different base materials. Two of the markers were composed of two different types of silicone rubber: DragonSkin™ 10 MEDIUM and BodyDouble™ SILK. The other two markers were composed of types of urethane rubber: PMC™ 780 DRY and VytaFlex™ 20. Silicone oil (KF-96 1000cs) was added to the fabricated markers. The allocated amount of oil was 20% of the weight (wt%) of each respective marker. The MR images of the markers, with and without the silicone oil, were acquired using MRIdian with a low magnetic field of 0.35 T. The signal intensities of each MR image for the markers were analyzed using ImageJ software and the visibility for each was compared. Results: The highest signal intensity was observed in VytaFlex™ 20 (279.67±3.57). Large differences in the signal intensities (e.g., 627% in relative difference between BodyDouble™ SILK and VytaFlex™ 20) among the markers were observed. However, the maximum difference between the signal intensities of the markers with the silicone oil showed only a 62% relative difference between PMC™ 780 DRY and DragonSkin™ 10 MEDIUM. An increase in the signal intensity of the markers with the silicone oil was observed in all markers. Conclusions: New markers were successfully fabricated. Among the markers, DragonSkin™ 10 MEDIUM with silicone oil showed the highest MR signal intensity.

• Restorative Dentistry and Endodontics
• /
• v.48 no.3
• /
• pp.25.1-25.13
• /
• 2023

Objectives: The purpose of this study was to evaluate the influence of endodontic access cavities design on the removal of calcium hydroxide medication of the apical third of mandibular incisor root canal walls and dentinal tubules with different cleaning protocols: EDDY sonic activation, Er,Cr:YSGG laser-activated irrigation, or conventional irrigation with IrriFlex. Materials and Methods: Seventy-eight extracted human mandibular incisors were assigned to 6 experimental groups (n = 13) according to the endodontic access cavity and cleaning protocol for calcium hydroxide removal: traditional access cavity (TradAC)/EDDY; ultraconservative access cavity performed in the incisal edge (UltraAC.Inc)/EDDY; TradAC/Er,Cr:YSGG; UltraAC. Inc/Er,Cr:YSGG; TradAC/IrriFlex; or UltraAC.Inc/IrriFlex. Confocal laser scanning microscopy images were used to measure the non-penetration percentage, maximum residual calcium hydroxide penetration depth, and penetration area at 2 and 4 mm from the apex. Data were statistically analyzed using Shapiro-Wilk and WRS2 package for 2-way comparison of non-normally distributed parameters (depth of penetration, area of penetration, and percentage of non-penetration) according to cavity and cleaning protocol with the significance level set at 5%. Results: The effect of cavity and cleaning protocol interactions on penetration depth, penetration area and non-penetration percentage was not found statistically significant at 2 and 4 mm levels (p > 0.05). Conclusions: The present study demonstrated that TradAC or UltraAC.Inc preparations with different cleaning protocols in extracted mandibular incisors did not influence the remaining calcium hydroxide at 2 and 4 mm from the apex.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.116-118
• /
• 2018

This paper introduces oneM2M global IoT standard middleware platform based smart city service data model support and FIWARENGSI interworking for Orion Broker. Also, service data models implementation using flexContainer resource types and FIWARENGSI interworking using the Interworking Framework (TS-0033) from oneM2M Release 3 are also illustrated. In this system, data model element level access (e.g. for subscription/notification feature) is enabled, which is enhancement compared to contentInstance resource type before, and service agnostic FIWARE NGSI interworking is provided over the Interworking Framework for smart city platform data interworking.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.7-8
• /
• 2007

Ti을 전극으로 한 RF plasma 를 사용한 표면 처리와 200 eV 이하의 저에너지 반응성 이온빔을 사용한 PI 표면 처리에 의해 초기 및 내열성이 우수한 COF 용 FCCL를 제작하였다. 임계 rf power 이상에서 새롭게 $TiO_2$층의 형성이 접착력 증대의 원인이었으며, Ni-Cr-Zn의 삼원계 접착층의 내열성 향상 특성 등을 연구하였다.

• Restorative Dentistry and Endodontics
• /
• v.30 no.2
• /
• pp.121-127
• /
• 2005

A variety files made of stainless steel (S-S) or nickel-titanium (Ni-Ti) are used during endodontic treatment. The purpose of tt)is study was to evaluate the corrosion susceptibility of S-S and Ni-Ti endodontic files. Three brands of files were used for this study: $K-flex^{(R)}$ S-S files (Maillefer, USA), $Profile^{(R)}$ Ni-Ti files (Maillefer, USA), $K-3^{(R)}$ Ni-Ti files (SybronEndo. USA). 120 files of each brands (21mm, ISO size $\#20$) were divided into 12 groups according to 1) sterilization methods using Autoclave or Ethylene Oxide (E-O) gas, 2) Irrigation solutions using $5.25\%$ NaOCl or Saline, 3) the number of sterilization (1, 5, 10 times), After above procedures, each of the files was inspected by three examiners with a light microscope and camera at X25. Each file was judged and ranked according to the following criteria: 0;, no corrosion, 1; mild corrosion, 2; moderate corrosion, and 3; severe corrosion. The files of high score were examined under the Scanning Electron Microscope. Data were statistically analyzed with the Kruskal-Wallis test (p < 0.05). Most of the ten time-autoclaved files had showed mild to moderate corrosion. But, one or five time-autoclaved files did not show corrosive surface. NaOCl treatment and E-O gas sterilization did not influence on corrosion. There was a significant difference in corrosion susceptibility between sterilization methods and the number of autoclaving. However, there was no significant difference between brands and file materials.

• Structural Monitoring and Maintenance
• /
• v.6 no.4
• /
• pp.365-387
• /
• 2019

This study aims to provide useful information on the fatigue assessment of a top-tensioned riser (TTR) subjected to vortex-induced vibration (VIV) by performing parametric study. The effects of principal design parameters, i.e., riser diameter, wall thickness, water depth (related to riser length), top tension, current velocity, and shear rate (or shear profile of current) are investigated. To prepare the base model of TTR for parametric studies, three (3) riser modelling techniques in the OrcaFlex were investigated and validated against a reference model by Knardahl (2012). The selected riser model was used to perform parametric studies to investigate the effects of design parameters on the VIV fatigue damage of TTR. From the obtained comparison results of VIV analysis, it was demonstrated that a model with a single line model ending at the lower flex joint (LFJ) and pinned connection with finite rotation stiffness to simulate the LFJ properties at the bottom end of the line model produced acceptable prediction. Moreover, it was suitable for VIV analysis purposes. Findings from parametric studies showed that VIV fatigue damage increased with increasing current velocity, riser outer diameter and water depth, and decreased with increasing shear rate and top tension of riser. With regard to the effects of wall thickness, it was not significant to VIV fatigue damage of TTR. The detailed outcomes were documented with parametric study results.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.14 no.1
• /
• pp.3-13
• /
• 2004

E-Commerce is suddenly spreading in a daily life. A rights trading system is a system that circulates digital-tickets such as plane tickets, software license, coupon. There are two main approaches so far account-based and smart-card based systems. The NTT Proposed FlexToken, a new smart card based copy prevention scheme for digital rights. They Proposed using pseudonymous self certified keys of Petersen and Horster in order to ensure anonymity of users. However. Petersen and Holster's scheme should register a pseudonymous key pair at TTP (One-time) every time so that users create the signature which is satisfied with unlinkability property In this paper, we propose a new anonymous rights trading system using group signature. This paper has a meaning having applied to digital rights trading system an efficient smart card based group signature.