• 대한치과보철학회지
• /
• 제53권4호
• /
• pp.359-365
• /
• 2015

많은 무치악 환자들은 부적합한 의치의 장기간 사용으로 인해 불규칙한 하악 운동을 하는 경우가 빈번하다. 총의치 제작 시 기능과 심미성을 만족하기 위해서는 정확한 하악 운동과 중심위를 채득하는 것이 중요하다. 본 증례는 불규칙한 하악 운동으로 중심위 채득이 어려운 환자를 flat occlusal table을 가진 treatment denture를 이용하여 총의치 수복하였기에 보고하는 바이다.

• Structural Engineering and Mechanics
• /
• 제6권4호
• /
• pp.427-437
• /
• 1998

Flat plate constructions are structural systems which are directly placed on columns without any beams. Various solution methods have been introduced for the solution of flat plate structures under horizontal and vertical loads. In most of these solution methods, models comprising of one column and one plate have been studied. In other solutions, however, co-behavior of two reciprocal columns has been investigated. In this study, interrelations of all the columns on one storey have been examined. At the end of the study structure consisting of nine columns and four plates has been chosen as a model. Then unit moment has been successively applied to each of these columns and unit moments carried over the other columns have been found. By working out solutions far plates and columns varying in ratio, carry-over factors have been found and these factors given in tables. In addition, fixed-end moment factors on the columns arising due to vertical load were also calculated. Then citing slope-deflection equations to which these results could be applied, some examples of moment and horizontal equilibrium equations have been given.

• 동아시아식생활학회지
• /
• 제20권5호
• /
• pp.655-667
• /
• 2010

In this study, problems with table serving of Korean Jeollanamdo food were investigated, and methods for improvement were suggested. The manner of food serving and arrangement on tables, as well as the serving space in each case, were investigated in representative restaurants serving Jeollanamdo food. The results showed that most of the Jeollanamdo Korean food have a prototype of a flat serving sprea, wherein the main dish and side dishes are not clearly identified, the demarcation between shared space and personal space is insufficiently made for each serving on the table, and the table is full of side dishes, that are narrow, visually disordered and unhygienic, both in terms of the table setting and arrangement inside bowls. To provide sufficient eating space, elevate awareness of hygienic and clean serving, and identifying the main dish in the table setting, a serving method that is a compromise between the flat spread-out and time-series development was suggested, and an arrangement on the table was defined for the main dish and side dishes. The utilization of table space was also increased by reducing the number of dishes on the table at a given moment. In addition, the dish or bowl and arrangement inside the container were changed in order to distinguish the main dish and side dishes. It is suggested that some of tableware be linked with the special products of the locality so as to make a brand for them, and that a personal mat be used to arrange the tableware for each one, since there are many fermented food items (salted fish, kimchi, fermented paste and sauce, etc.) and boiled food items (stew, steamed dish, boiled dish in sauce, etc) that look dark and unfocused. In addition, it is suggested that the width and breadth of the dishes or bowls be set in an orderly manner. Considering the tables currently available at restaurants, personal space on a table and comfortable distance between eaters are suggested to be $400 mm{\times}250 mm$ and 300 mm, respectively.

• 대한치과보철학회지
• /
• 제60권4호
• /
• pp.330-338
• /
• 2022

과두 골절 및 형태 이상으로 인해 불안정한 하악 운동 및 비정상적인 안모를 갖는 무치악 환자의 경우 환자의 안정된 하악위를 찾는 것이 중요하다. 본 증례에서는 flat table 치료의치를 이용하여 환자의 안모개선, 하악 운동의 안정, 의치의 안정성이 향상시켰다. 또한 flat table 치료의치의 수직고경 및 구순 지지도를 유지하고자 CAD-CAM 기술을 이용하여 제작한 총의치 수복을 통해 환자의 불편감을 개선하는 양호한 결과를 얻었기에 이를 보고하는 바이다.

• 한국환경복원기술학회지
• /
• 제14권3호
• /
• pp.57-69
• /
• 2011

This study examined the relationship between Phragmites australis' growth and sediment properties at mud tidal flat of Donggum-ri, Gilsang-myeon, Gangwha-gun, Incheon city. Field survey was carried out from May, 2010 to October, 2010. Water content, soil texture, electric conductivity and water table depth for sediment, density, height, dry weight and flowering for P. australis were examined at several plots from the starting point (the coastal embankment) to the end point of the two populations. The result was as follows. Firstly, the water table increased along distance from the embankment at one line (N-line) but was similar at the other line (S-line) in a P. asustralis population. Water tables were higher out of than within a P. australis population at two populations. Secondary, in N-line, the height and dry weight of P. australis decreased along the distance from embankment but, in S-line, those were similar in its population. P. australis' growth was dependent on electric conductivity at lower layer (water table level) rather than upper one (the surface). Thirdly, density of P. australis changed during growing season and was similar in a population, except for the end point of patch. In summary, the growth and distribution of P. australis were dependent on salt content of tidal flat's sediment (water table level) and this was affected by fresh water of the inland.

• 대한치과보철학회지
• /
• 제58권4호
• /
• pp.378-384
• /
• 2020

잘 맞지 않는 의치를 장기간 사용하여 불안정한 하악운동을 가진 환자에게서 성공적인 새 의치를 제작하는 것은 도전적이다. 이러한 증례에서 새 의치를 제작하기 전에 정확한 중심위를 채득하는 것은 매우 중요하다. 본 증례에서 하악의 운동을 안정화 시키고, 중심위를 채득하기 위해 flat occlusal table을 가진 치료의치를 이용하였다. 치료의치를 통해 얻어진 환자의 악간관계와 수직고경을 최종의치에 최대한 반영하기 위해 치료의치를 디지털 복제하였고, 복제된 치료의치 이용하여 인상과 악간관계 채득하였다. 이를 통해 심미적, 기능적으로 만족할 만한 결과를 얻었기에 보고하는 바이다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.67-76
• /
• 2002

Self-leveling material(SLM) is one of the floor finishing materials which make flat surface like as water level by itself in a short time. So it is possible to increase construction speed and enhance economical efficiency. In this study, author intended to develop SLM for the industrial warehouse and factory loading heavy weight machinery and vehicles. The demanded properties for this type of SLM are above 20mm of flow value and above 300kgf/cm2 of 28-days compressive strength. To possess demended strength and fluidity, SLM have to be composed of many types of binders and chemical additives. So it is difficult to decide suitable mixing proportion of composition materials. In this study, author investigated the weight percentage effect of main composition materials for high-strength self-leveling material, by experimental design such as tables of orthogonal arrays and simplex design, and by statistical analysis such as analysis of variance and analysis of response surface. Variables of experiments were ordinary portland cement(OPC), alumina cement(AC), anhydrous gypsum(AG), lime stone(LS) and sand, and properties of tests were fluidity of fresh state and strength of hardened state. Results of this study are showed that suitable mix proportions of binders for the high strength self-leveling materials are two groups. One is 78~85.5% OPC, 7.5~9.5% AC, 9~12.5% AG and the other is 72.5~78% OPC, 9~12.5% AC, 13~l5% AG.

• Animal Systematics, Evolution and Diversity
• /
• 제19권2호
• /
• pp.283-296
• /
• 2003

한국산 산호충류의 분류학적 연구의 일환으로 1952년부터 1998년까지 덕적도, 작약도, 영종도와 후포에서 채집된 말미잘류를 동정 분류하였다. 그 결과 2과 3속 3종의 무족반류가 밝혀졌으며, 이들은 1신종인 유사벌레붙이말미잘(Synandwakia multitentaculata n. sp.)과 한국 2미기록종인 벌레붙이말미잘(Edwardsioides japonica), 가는벌레붙이말미잘(Metedwardsia akkeshi)로 형태학적 특징을 그림 및 표와 함께 기술하였다. 본 신종은 촉수의 수가 180-200개에 이르며, 촉수와 창사의 대형자포에서 호자와벌레붙이말미잘(Synandwakia hozawai)과 쉽게 구별된다.

• 한국실내디자인학회논문집
• /
• 제21권5호
• /
• pp.23-33
• /
• 2012

This study evaluated two educational spaces, one middle school and one high school in point of universal design. The survey method with an observation and measuring method was used. The subject were 238 students of a middle and a high school. They evaluated their schools according to 53 universal design related items which consisted of 5 principles. Findings were as follows ; 1) The width of passage between desk and desk was very narrow and there is the threshold at the door of classroom. The students evaluated them negatively, too. Also, they indicated that the size of individual locker was small and the corner of furniture was sharp. 2) The width of door and passage was narrow and the floor was not flat in restroom. The design quality such as color and finishes was not good. Also, the students evaluated all these items negatively. 3) The dining space was too big. That is, so many students takes meals in one big space. The dining tables were arranged in a long rows and the width between them was also so narrow to pass through. 4) The student of high school evaluated their educational environments more negatively than ones of middle high school. This means that the high school students were more dissatisfied with their school environment. The educational environment should be designed on the base of their students' needs.

• 산업경영시스템학회지
• /
• 제39권4호
• /
• pp.90-96
• /
• 2016

Incremental sheet forming (ISF) is a highly versatile and flexible process for rapid manufacturing of complex sheet metal parts. Compared to conventional sheet forming processes, ISF is of a clear advantage in manufacturing small batch or customized parts. ISF needs die-less machine alone, while conventional sheet forming requires highly expensive facilities like dies, molds, and presses. This equipment takes long time to get preparation for manufacturing. However, ISF does not need the full facilities nor much cost and time. Because of the facts, ISF is continuously being used for small batch or prototyping manufacturing in current industries. However, spring-back induced in the process of incremental forming becomes a critical drawback on precision manufacturing. Since sheet metal, being a raw material for ISF, has property to resilience, spring-back would come in the case. It is the research objective to investigate how geometrical shaping parameters make effect on shape dimensional errors. In order to analyze the spring-back occurred in the process, this study experimented on Al 1015 material in the ISF. The statistical tool employed experimental design with factors. The table of orthogonal arrays of $L_8(2^7)$ are used to design the experiments and ANOVA method are employed to statistically analyze the collected data. The results of the analysis from this study shows that the type of shape and the slope of bottom are the significant, whereas the shape size, the shape height, and the side angle are not significant factors on dimensional errors. More error incurred on the pyramid than on the circular type in the experiments. The sloped bottom showed higher errors than the flat one.