• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.359-365
• /
• 2015

Long-term use of ill-fitting dentures may cause irregular movements of the mandible. In such cases, satisfactory outcomes both in terms of function and esthetics could be achieved by accurate registration of mandibular movement and centric relation when fabricating new dentures. In this case, treatment dentures with flat occlusal tables were used to register centric relation and mandibular movements of a patient with erratic mandibular movements.

• Structural Engineering and Mechanics
• /
• v.6 no.4
• /
• pp.427-437
• /
• 1998

Flat plate constructions are structural systems which are directly placed on columns without any beams. Various solution methods have been introduced for the solution of flat plate structures under horizontal and vertical loads. In most of these solution methods, models comprising of one column and one plate have been studied. In other solutions, however, co-behavior of two reciprocal columns has been investigated. In this study, interrelations of all the columns on one storey have been examined. At the end of the study structure consisting of nine columns and four plates has been chosen as a model. Then unit moment has been successively applied to each of these columns and unit moments carried over the other columns have been found. By working out solutions far plates and columns varying in ratio, carry-over factors have been found and these factors given in tables. In addition, fixed-end moment factors on the columns arising due to vertical load were also calculated. Then citing slope-deflection equations to which these results could be applied, some examples of moment and horizontal equilibrium equations have been given.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.5
• /
• pp.655-667
• /
• 2010

In this study, problems with table serving of Korean Jeollanamdo food were investigated, and methods for improvement were suggested. The manner of food serving and arrangement on tables, as well as the serving space in each case, were investigated in representative restaurants serving Jeollanamdo food. The results showed that most of the Jeollanamdo Korean food have a prototype of a flat serving sprea, wherein the main dish and side dishes are not clearly identified, the demarcation between shared space and personal space is insufficiently made for each serving on the table, and the table is full of side dishes, that are narrow, visually disordered and unhygienic, both in terms of the table setting and arrangement inside bowls. To provide sufficient eating space, elevate awareness of hygienic and clean serving, and identifying the main dish in the table setting, a serving method that is a compromise between the flat spread-out and time-series development was suggested, and an arrangement on the table was defined for the main dish and side dishes. The utilization of table space was also increased by reducing the number of dishes on the table at a given moment. In addition, the dish or bowl and arrangement inside the container were changed in order to distinguish the main dish and side dishes. It is suggested that some of tableware be linked with the special products of the locality so as to make a brand for them, and that a personal mat be used to arrange the tableware for each one, since there are many fermented food items (salted fish, kimchi, fermented paste and sauce, etc.) and boiled food items (stew, steamed dish, boiled dish in sauce, etc) that look dark and unfocused. In addition, it is suggested that the width and breadth of the dishes or bowls be set in an orderly manner. Considering the tables currently available at restaurants, personal space on a table and comfortable distance between eaters are suggested to be $400 mm{\times}250 mm$ and 300 mm, respectively.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.4
• /
• pp.330-338
• /
• 2022

For edentulous patients with unstable mandibular movements and abnormal facial features due to condylar fractures and morphological abnormalities, it is important to find a stable mandibular position. In this case, the patient's facial improvement, mandibular movement stability, and denture stability were improved by using flat table treatment dentures. In addition, computer-aided design/manufacturing (CAD-CAM) technology was used in denture fabrication to maintain the vertical dimension and lip support of flat table treatment dentures, we report good results in improving the patient's discomfort.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.3
• /
• pp.57-69
• /
• 2011

This study examined the relationship between Phragmites australis' growth and sediment properties at mud tidal flat of Donggum-ri, Gilsang-myeon, Gangwha-gun, Incheon city. Field survey was carried out from May, 2010 to October, 2010. Water content, soil texture, electric conductivity and water table depth for sediment, density, height, dry weight and flowering for P. australis were examined at several plots from the starting point (the coastal embankment) to the end point of the two populations. The result was as follows. Firstly, the water table increased along distance from the embankment at one line (N-line) but was similar at the other line (S-line) in a P. asustralis population. Water tables were higher out of than within a P. australis population at two populations. Secondary, in N-line, the height and dry weight of P. australis decreased along the distance from embankment but, in S-line, those were similar in its population. P. australis' growth was dependent on electric conductivity at lower layer (water table level) rather than upper one (the surface). Thirdly, density of P. australis changed during growing season and was similar in a population, except for the end point of patch. In summary, the growth and distribution of P. australis were dependent on salt content of tidal flat's sediment (water table level) and this was affected by fresh water of the inland.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.4
• /
• pp.378-384
• /
• 2020

For patients with unstable mandibular movements and centric relation of the mandible due to long-term use of ill-fitting dentures, the successful fabrication of new dentures is challenging. Before fabrication new dentures, registration of centric relation is the critical point in such cases. In this case, treatment dentures with a flat occlusal table were used to stabilize mandibular movements and to register centric relation. In order to reflect the patient's jaw relation and vertical dimension obtained through the treatment dentures to the final denture, the treatment dentures were digitally duplicated, and impressions and jaw relations were obtained using the duplicated therapeutic dentures. The clinical results were satisfactory on the aspect of aesthetic and masticatory functioned.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2002.11a
• /
• pp.67-76
• /
• 2002

Self-leveling material(SLM) is one of the floor finishing materials which make flat surface like as water level by itself in a short time. So it is possible to increase construction speed and enhance economical efficiency. In this study, author intended to develop SLM for the industrial warehouse and factory loading heavy weight machinery and vehicles. The demanded properties for this type of SLM are above 20mm of flow value and above 300kgf/cm2 of 28-days compressive strength. To possess demended strength and fluidity, SLM have to be composed of many types of binders and chemical additives. So it is difficult to decide suitable mixing proportion of composition materials. In this study, author investigated the weight percentage effect of main composition materials for high-strength self-leveling material, by experimental design such as tables of orthogonal arrays and simplex design, and by statistical analysis such as analysis of variance and analysis of response surface. Variables of experiments were ordinary portland cement(OPC), alumina cement(AC), anhydrous gypsum(AG), lime stone(LS) and sand, and properties of tests were fluidity of fresh state and strength of hardened state. Results of this study are showed that suitable mix proportions of binders for the high strength self-leveling materials are two groups. One is 78~85.5% OPC, 7.5~9.5% AC, 9~12.5% AG and the other is 72.5~78% OPC, 9~12.5% AC, 13~l5% AG.

• Animal Systematics, Evolution and Diversity
• /
• v.19 no.2
• /
• pp.283-296
• /
• 2003

Actiniarians were collected from the sandy mud flat of Deokjeokdo, Jak-yakdo, Yeoungjongdo and Hupo of Korean waters from 1962 to 1998. They are identified into three species of two families, which are newly recorded to Korean athenarian fauna: Synandwakiu multitentaculata n. sp., Edwardsioides japonica (Carlgren, 1931) and Metedwardsia akkeshi (Uchida, 1932). They are described in detail with figures and tables. Synandwakia multitentaculata n. sp. is easily distinguished from S. hozawai by having up to 200 in the number of tentacles and by the peculiar macrobasic amastigophores of tentacles and the larger microbasic p-mastigophores of acontia in the macrocnidae.

• Korean Institute of Interior Design Journal
• /
• v.21 no.5
• /
• pp.23-33
• /
• 2012

This study evaluated two educational spaces, one middle school and one high school in point of universal design. The survey method with an observation and measuring method was used. The subject were 238 students of a middle and a high school. They evaluated their schools according to 53 universal design related items which consisted of 5 principles. Findings were as follows ; 1) The width of passage between desk and desk was very narrow and there is the threshold at the door of classroom. The students evaluated them negatively, too. Also, they indicated that the size of individual locker was small and the corner of furniture was sharp. 2) The width of door and passage was narrow and the floor was not flat in restroom. The design quality such as color and finishes was not good. Also, the students evaluated all these items negatively. 3) The dining space was too big. That is, so many students takes meals in one big space. The dining tables were arranged in a long rows and the width between them was also so narrow to pass through. 4) The student of high school evaluated their educational environments more negatively than ones of middle high school. This means that the high school students were more dissatisfied with their school environment. The educational environment should be designed on the base of their students' needs.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.4
• /
• pp.90-96
• /
• 2016

Incremental sheet forming (ISF) is a highly versatile and flexible process for rapid manufacturing of complex sheet metal parts. Compared to conventional sheet forming processes, ISF is of a clear advantage in manufacturing small batch or customized parts. ISF needs die-less machine alone, while conventional sheet forming requires highly expensive facilities like dies, molds, and presses. This equipment takes long time to get preparation for manufacturing. However, ISF does not need the full facilities nor much cost and time. Because of the facts, ISF is continuously being used for small batch or prototyping manufacturing in current industries. However, spring-back induced in the process of incremental forming becomes a critical drawback on precision manufacturing. Since sheet metal, being a raw material for ISF, has property to resilience, spring-back would come in the case. It is the research objective to investigate how geometrical shaping parameters make effect on shape dimensional errors. In order to analyze the spring-back occurred in the process, this study experimented on Al 1015 material in the ISF. The statistical tool employed experimental design with factors. The table of orthogonal arrays of $L_8(2^7)$ are used to design the experiments and ANOVA method are employed to statistically analyze the collected data. The results of the analysis from this study shows that the type of shape and the slope of bottom are the significant, whereas the shape size, the shape height, and the side angle are not significant factors on dimensional errors. More error incurred on the pyramid than on the circular type in the experiments. The sloped bottom showed higher errors than the flat one.